Marc Spagnuolo's Blog, page 37

Manual Kickback – Friday Live

01:49 – It’s Friday Live!

02:36 – Thanks to our Patreon supporters

03:03 – A Craftsman’s Legacy

04:15 – Wes Johson autographed picture

05:55 – Will there be an audiobook for Essential Joinery?

08:25 – How do you determine how thick something needs to be for strength?

https://www.woodbin.com/calcs/sagulator/

https://www.thewoodwhisperer.com/woodshop-widget-2-0/

11:15 – New Wood Whisperer Aprons

https://thewoodwhispererguild.com/product/leather-apron/

13:55 – How long will mineral oil take to sweat out of my end grain cutting boards?

https://www.amazon.com/dp/B003DL10MK/?cv_ct_id=amzn1.idea.3QN2LXQZFF81P&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

19:09 – Should I use the Festool sized dogholes or a standard 3/4 inch?

20:07 – After planing my red oak, there are lots of little holes. What should I do?

https://www.amazon.com/dp/B001NV52SA/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

21:57 – How do you manage to prevent tear out when crosscutting on the table saw?

https://www.amazon.com/dp/B0000223VQ/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

26:00 – A customer wants a 2-inch thick walnut counter? How would you joint the top?

29:38 – Shed’s almost done!

32:13 – Can you comment on the difference between Board Buddies vs JessEm Clear-cut stock guides?

https://www.amazon.com/dp/B0000223VK/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

https://www.amazon.com/dp/B00O5TGQ50/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

35:13 – Who does the intro to WoodTalk?

36:22 – Any tips for doing angled dovetailed sides?

37:10 – What would you recommend as a drawer pull for a mid-century piece?

40:13 – I have a water-based finish on my computer desk that is failing after 5 years…what can I do?

42:00 – Is a 20-inch planer worth the extra money over a 15 inch?

43:51 – In your ideal shop, how many outlets would you have?

47:01 – What should you treat a finished cutting board with?

48:25 – Are you planning on traveling abroad to make an instrument?

49:50 – Can you give any business advice on starting a woodworking business?

https://www.thewoodwhisperer.com/why-i-dont-offer-woodworking-business-advice/

53:00 – Have you ever used a Jet mortiser?

53:58 – Guild project winner! Congratulations!

55:14 – Showcasing the new jointer

Products recommended by Marc

https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Manual Kickback – Friday Live appeared first on The Wood Whisperer.

Sick and Tired – Friday Live

02:45 – It’s Friday Live!

03:02 – Thank You’s

06:22 – New Patreon supporters

07:02 – Does seeing wood furniture while on vacation get you excited to get back into the shop? https://www.thewoodwhisperer.com/a-woodworkers-surprise-at-disneyland/

10:15 – Should my furniture match or contrast the shade of the wooden floor it’s sitting on?

13:00 – Does Marc ever overdesign simple things?

13:50 – Do you use a different respirator when finishing vs regular one when woodworking?

https://www.amazon.com/dp/B00IF7RCU6/?cv_ct_id=amzn1.idea.3P6GYQP46ELJO&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

18:50 – Do you resaw on a bandsaw or table saw?

16 – Cut Your Own Veneer

19:50 – What’s the best way to joint two large slabs together? Not much success with flush trim bit.

21:40 – Will you be making a Challenge Coin display cabinet?

22:10 – Do you have any experience with a hot melt filler vs an epoxy filler for knot fillings?

23:10 – Will there be an option for embroidered polos in the TWW store?

24:15 – What router do you recommend putting in an Incra router table?

https://www.amazon.com/dp/B0000222V3/?cv_ct_id=amzn1.idea.2UC6NG4F65ZG7&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

25:23 – Can you frame an end grain cutting board with long grain?

https://www.thewoodwhisperer.com/videos/how-to-make-a-butcher-block-cutting-board/

27:12 – Getting ready to build a torsion top outfeed table, how tall should I make the top?

https://www.thewoodwhisperer.com/videos/episode-18-assembly-table-torsion-box/

30:39 – Do you still sell the thread taps?

https://www.eagleamerica.com/product/...

31:12 – How do I sharpen the blade of a cabinet scraper?

https://www.highlandwoodworking.com/sharpening80cabinetscrapers.aspx

32:25 – What are the holes in the Incra Mitre sled for? Will it work on my hybrid saw?

33:49 – Would you prefer woodworking as a career or being a YouTube content creator in another category?

35:57 – How do you avoid feeling unskilled after seeing amazing content on Instagram from other creators?

41:23 – What countersink bit and plug cutting bit do you recommend?

https://www.amazon.com/gp/product/B00BJFK6N6/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=thewoodwhispe-20&linkId=22b1026d4e056df6fbd09a7b06fa721b

https://www.amazon.com/dp/B0014A450G/...

42:05 – How do I get rid of a glue line squeezeout between a joint?

https://www.thewoodwhisperer.com/articles/hot-to-handle-glue-squeeze-out/

43:50 – Have you ever walked away from a project for 4 months? How was it when you returned?

46:15 – Essential Joinery book update

http://essentialjoinery.com

47:35 – What woodworking related things should I see in Anaheim? I’m going to be visiting from Australia.

https://wnwoodworkingschool.com/

49:10 – If I only have the room for a benchtop table saw, should I get a mitre saw or track saw?

50:11 – Is there a way to account for wood movement when flocking such as the drawer in the jewelry box project?

https://thewoodwhispererguild.com/product/jewelry-box/

51:20 – Can you use a track saw for crosscuts?

54:40 – Did Woodpeckers send you the sharpening jig one-time tool?

https://www.woodpeck.com/one-time-tools/ott-sharpeningsystem-2019.html

56:24 – Guild Project Winner! Congrats!

Products recommended by Marc

https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Sick and Tired – Friday Live appeared first on The Wood Whisperer.

Little Stubby – Friday Live

00:01:49 – It’s Friday Live!

00:05:05 – Thank yous

00:07:22 – Essential Joinery update and preview

http://essentialjoinery.com

00:10:35 – WoodTalk is back!!!! Sort of

http://www.woodtalkshow.com/

00:12:15 – Are digital copies included with the book purchase?

00:13:40 – Is there an update with hardcovers?

00:14:45 – What are Nicole’s favorite Marc-made things?

https://thewoodwhispererguild.com/product/gg-blanket-chest/

00:16:15 – What’s your criteria for deciding what joint to use?

00:18:50 – Is there a food-grade matte finish?

00:20:50 – Do you still use the Gaming table?

https://thewoodwhispererguild.com/product/gaming-table/

00:21:30 – How long do you let glue dry before using?

00:23:48 – Do you have equipment that requires a lot of maintenance?

00:25:17 – Are there advantages between the Domino and JDS MultiRouter?

https://multi-router.com/product/multi-router/

00:27:50 – Is the multi-router similar to the panto router?

00:29:00 – Do you have any support options besides Patreon?

https://www.thewoodwhisperer.com/support/

00:29:43 – Do you miss the Arizona weather?

00:32:40 – Woodpeckers joiners marking gauge demo:

https://www.woodpeck.com/one-time-tools/ott-joinersmarkinggauge-2019.html

00:38:12 – How do you keep the purple in Purpleheart?

00:40:00 – Where can I donate old woodworking literature?

00:40:33 – How often do you hurt your hands while woodworking?

00:41:50 – Can you talk about your brass mallets?

https://www.glen-drake.com/Tite-Hammers/

00:42:53 – What size cutoffs do you keep vs toss?

00:46:10 – Do you have any intentions on doing a hand tool series?

https://www.handtoolschool.net/

00:48:12 – Do you have any tips to straighten out a dado cut?

00:48:55 – How do you lubricate your table saw gears?

00:51:15 – How does the Woodpeckers marking gauge cut compare to a wheel or marking knife?

00:56:20 – What’s the deal with double bevel chisels?

https://www.marymaycarving.com/carvingschool/lets-talk-about-woodcarving/topic/double-vs-single-bevel/

00:57:50 – What’s the best oil to keep machines from getting rusty?

https://www.amazon.com/shop/thewoodwhisperer?listId=2FDNPTMSOGTDJ

01:00:17 – Have you dealt with lines in arm r seal finishes?

01:03:28 – How do you calibrate your drill press chuck?

No show next week

Products recommended by Marc

https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Little Stubby – Friday Live appeared first on The Wood Whisperer.

Black Hole and Butt Joints – Friday Live

00:02:18 – Hey! It’s Friday live!

00:03:51 – Essential Joinery!

https://thewoodwhispererguild.com/pro...

00:04:34 – Credenza video

Media Credenza, Now with More Crotch!

00:04:55 – Essential Joinery release party at Austin Hardwoods

https://www.eventbrite.com/e/essentia...

00:07:08 – New filter capability on projects on the guild site

https://thewoodwhispererguild.com/sto...

00:11:37 – When making a table top, what’s the best way to incorporate pieces shorter than the full length?

00:14:11 – Regarding the above question, can you do a scarf joint?

00:15:09 – Credenza video is on Amazon Prime

https://www.amazon.com/gp/video/detai...

00:17:00 – Is it better to watch the new videos on YouTube or Amazon Prime?

00:18:00 – The back of my drawers are binding in the back due to the back of my drawer being too wide. How to fix?

00:19:40 – Do you ever plan on getting into CNC?

00:20:40 – Looking for finishing solutions for outdoor shutters?

https://www.thewoodwhisperer.com/wood...

00:24:21 – Are your videos on Amazon Prime in Australia too or just the US?

00:26:08 – Do you only plane the non-jointed face of a board?

00:29:01 – Will there be any delays to Hall Tree videos because of the book release?

https://thewoodwhispererguild.com/pro...

00:32:46 – What’s your take on hand making a Maloof rocking chair?

https://thewoodwhispererguild.com/pro...

00:34:16 – If you were to buy a tracksaw, domino, or Festool sander, which one would you buy?

00:35:20 – Have you used WoodRX? I’ve had good luck with it as an outdoor finish.

00:35:45 – The rip fence on my old saw needs to be replaced. Any suggestions?

00:37:25 – Any tips for routing small pieces on a router table?

00:39:08 – What’s your “jack of all trades” bandsaw blade?

00:40:03 – Why did you use the domino to repair the credenza side aprons? Why not cut new mortises?



00:42:00 – Do you have discount codes for Festool?

00:43:00 – Any ideas what is going to be next for pre orders in the guild projects?

00:44:07 – The dust shoot on my Powermatic table saw keeps falling off. Any tips?

00:46:20 – How active are the members in the Woodwhisperer Guild?

https://thewoodwhispererguild.com/mem...

00:50:11 – What features are ESSENTIAL to a router table and which features are nice but not necessary?

00:53:00 – I’m making a maple/purpleheart cutting board. Any tips?



00:55:05 – Is there a way to see all the member benefits of seeing the guild?

https://thewoodwhispererguild.com/mem...

00:55:50 – Do you plan on putting out any more free content on YouTube?

00:56:10 – Can you add your shirt to the Amazon store?

Spreadshirt

00:57:04 – What do you do with all the projects you make? Keep them? Sell them?

00:58:48 – I got a surprise haul of sapele. What blade angle should I use to prevent tearout?

01:00:25 – When you bookmatch smaller panels do you use a spline or just a butt joint?

01:01:25 – I want to upgrade my miter gauge, what made you choose between the Incra 1000 vs Incra 5000?

01:04:05 – Guild project winner!

Products recommended by Marc

https://www.amazon.com/shop/thewoodwh...

Canada! http://amazon.ca/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/w...

Check out our main Woodworking channel for projects and techniques: http://youtube.com/thewoodwhisperer

Check out our website: http://thewoodwhisperer.com

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Black Hole and Butt Joints – Friday Live appeared first on The Wood Whisperer.

Media Credenza, Now with More Crotch!

I have been on the hunt for a Media Credenza design for over a year now and nothing really tickled my fancy. That is until I came across a cabinet in Mike Pekovich’s IG feed that he made with a student, Sean Montague. Turns out, the cabinet was inspired by the work of Philip Morley. So in a somewhat convoluted way, all three of these gentlemen had a role in influencing the design of this Media Credenza.

The project features book-matched crotch grain raised panel doors that slide smoothly in shallow grooves. Each compartment has holes and slots for wires and ventilation. While I made the project from 5/4 walnut and the plans reflect that, you should know that standard 4/4 material would suffice. I hope you enjoy.

If you’re interested in my new book, Essential Joinery, you can buy an autographed copy from me directly here or on Amazon.

Stuff I Used

Magnetic stop
White pencils
Glue roller
Titebond III
Titebond Liquid Hide Glue
Countersink Bit

Referenced Videos

Round Red Oak Table Top
Hollow Chisel Mortiser Setup & Use

Plans

Sketchup File
Sketchup File Metric
PDF/Cut List
PDF/Cut List Metric

Gallery

The post Media Credenza, Now with More Crotch! appeared first on The Wood Whisperer.

Did This Just Get Awkward? – Friday Live

00:01:30 – Hi everybody! Welcome to the smooth jazz show.

00:02:21 – Thanks to the new Patreon subscribers!

https://www.patreon.com/woodwhisperer

00:04:30 – Opening packages and mailings

https://www.youtube.com/channel/UCGX_hOeWeTJffX4bPadg4BQ

00:07:02 – How would you finish a cribbage board?

00:09:23 – Hall Tree Guild preorder ends tonight!

https://thewoodwhispererguild.com/product/hall-tree-storage-bench/

00:10:30 – Essential Joinery has arrived!

https://thewoodwhispererguild.com/product/essential-joinery-book/

00:13:30 – Austin Hardwoods book launch in Denver

https://www.facebook.com/events/austin-hardwoods-of-denver/essential-joinery-book-launch-party/392076888257771/

00:15:33 – Are the hardcover versions of Essential Joinery on the same schedule?

00:16:02 – Are there any hardcover copies left?

00:18:05 – Kitchen countertop finish? Epoxy? Epiphanes? Other?

00:19:55 – Can you explain why you would use a crosscut sled and miter saw?

00:21:30 – Are you sending books out via media mail?

00:22:25 – Diamond plate or water stone sharpening system?

https://www.amazon.com/dp/B01FYEYKE8/?cv_ct_id=amzn1.idea.MUCBTHY2XFPZ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d

00:24:55 – Should we contact your mom to know when we get our book?

00:25:41 – Is Nicole’s brother a permanent member of TWW team?

00:27:55 – Update on the Incra 5000 sled? Is it a replacement for a crosscut sled?

https://www.thewoodwhisperer.com/tww_live/hide-yo-weed-friday-live/

00:29:25 – Water stones past 16000? Worth it?

00:31:10 – Have you used a miter lion?

00:32:45 – Do you have blast gates in your dust collection system?

https://www.thewoodwhisperer.com/videos/automate-your-dust-collection-with-ivac/

00:35:30 – What’s your approach to buying things for your shop?

00:42:15 – Will the Hank Chair build include paper templates?

https://thewoodwhispererguild.com/product/hank-chair/

00:43:50 – If Powermatic didn’t sponsor you, would you still user Powermatic?

00:47:35 – What happened to Marc’s relationship with Festool?

00:48:48 – Could you make a suggestion on a new ROS?

00:52:35 – Cute kid story!

00:53:40 – Is using string the same as using winding sticks for leveling a workbench top?

00:55:55 – Any tips for a starting woodworker with a small shop?

https://www.thewoodwhisperer.com/shop-tours/

00:59:02 – Guild project giveaway!

01:00:00 – iTunes podcast of Wood Whisperer Live

https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Products recommended by Marc

https://www.amazon.com/shop/thewoodwh...

Canada! http://amazon.ca/shop/thewoodwhisperer

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Did This Just Get Awkward? – Friday Live appeared first on The Wood Whisperer.

Two Chisels – Friday Live PM!

0:00 Koo Koo Kanga Roo http://kookookangaroo.com/

01:45 – Hey everybody!

03:35 – Looking to upgrade chisels…recommendations in the $100-$150 range?

https://www.amazon.com/shop/thewoodwhisperer?listId=3P6GYQP46ELJO

04:49 – What hand exercises are you using for preparing to sign all the books?

05:45 – Do you have any recommendations on a wood file or rasp?

08:06 – How did you decide on your tattoos?

10:50 – Is there a safe way to make a panel groove in rails and stiles with a fixed base router?

13:18 – If you weren’t making videos, how would you rate the Festool CMS versus competitors?

https://www.thewoodwhisperer.com/videos/festool-cms-router-table/

16:30 – How is the Incra router table working out for you?

17:15 – Should I upgrade my planer to a helical head?

https://shelixheads.com/

19:00 – Epoxy as a wood glue…what do I need to know? Filler or no filler?

20:50 – Thoughts on the Laguna Driftmaster bandsaw fence?

23:56 – Should I fill the grain / do a pore fill on a countertop I am making?

https://www.thewoodwhisperer.com/videos/round-oak-table-with-osmo-polyx-oil-pure/

25:35 – Thoughts on finishing the inside of a chest of drawers?

26:30 – Is the Powermatic 1500 bandsaw worth the price upgrade over a comparable Grizzly / Laguna?

28:45 – Is it ok to store lumber standing upright rather than laying flat?

https://www.thewoodwhisperer.com/videos/racking-my-brain/

29:55 – What is the coolest thing you’ve seen in another shop that you plan on incorporating into your own?

32:10 – Audio version of Friday live!

https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

33:18 – Do you have opinions on using epoxy as a clear pore filler?

34:36 – Will there be any more WoodTalk???

37:26 – When can I buy the book if I missed the pre-order?

https://thewoodwhispererguild.com/store/extras/

38:55 – Do you know if there are plans to incorporate oscillation into the Powermatic Drum sander? Also, how are the casters?

40:20 – With all the pallets from the books, will your next project incorporate pallet wood?

41:35 – Who would win an arm wrestling match? Marc or Matt?

42:46 – Is bloxygen any good?

https://www.thewoodwhisperer.com/tww_live/bloxygen-brushless-motors-friday-live/

45:20 – What blade is currently on your table saw?

https://www.thewoodwhisperer.com/articles/which-saw-blade-should-i-buy/

47:54 – Congrats to the Cremonas!

49:16 – What are you currently working on?

https://thewoodwhispererguild.com/product/hall-tree-storage-bench/

50:53 – Do rasps and files only cut one way?

53:24 – Have you ever used Ecopoxy’s UVPoxy?

54:38 – Which bandsaw would you recommend between a Laguna or a Rikon 12″ bandsaw?

Support us on Patreon: https://www.patreon.com/woodwhisperer

Products recommended by Marc

US – https://www.amazon.com/shop/thewoodwhisperer

Canada https://www.amazon.ca/shop/thewoodwhisperer

The post Two Chisels – Friday Live PM! appeared first on The Wood Whisperer.

It’s Not Ideal – Friday Live!

00:01:42 – Happy QoS!

00:02:25 – Finished Credenza!

00:04:50 – Thank you’s

https://www.instagram.com/littlecityworkshop/

00:05:41 – Earbuds shootout update!

https://www.youtube.com/watch?v=iy7p0fDacns

00:07:08 – Jumpin’ into the Woodpeckers

https://www.woodpeck.com/one-time-tools/onetime-tool-dsf-gap-gauge2019.html

00:15:22 – How far down the leg should the screw for a leg vice be? Is 2 1/8″ thick enough for the chop?

00:17:59 – What’s the pros and cons of putting end caps on both ends of Andy’s tail vice?

https://www.kickstarter.com/projects/2121995757/twin-turbo-vise?ref=user_menu

00:20:00 – Would you have used Andy’s twin screw vice if you were to rebuild your Roube now?

00:22:00 – Marc’s health update

00:23:37 – Do you consider sapwood a defect?

00:25:04 – Can you recommend an efficient way to sand edge profiles?

http://www.epoch-wood.com/sandpaper

00:28:10 – Should raw lumber thicknesses correspond to inch measurements?

https://www.archtoolbox.com/materials-systems/wood-plastic-composites/dimensional-lumber-sizes-nominal-vs-actual.html

00:31:02 – How do I make it up to my wife that I used her good measuring cup for Shellac?

00:33:41 – Would I have a problem using a large end grain butcher block as a table top? What kind of base should I use?

00:35:50 – What is your expiernce with Footprint hand chisels?

00:36:50 – What size dovetail bit should I use for a sliding dovetail to attach front and back to sides of a chest of drawers?

00:39:55 – How are winners chosen for the draw?

00:40:40 – Any idea how tall the hall tree storage bench will be?

https://thewoodwhispererguild.com/product/hall-tree-storage-bench/

00:41:54 – What’s the best way to get in touch with Marc?

00:44:04 – What tooth count on a dovetail saw would you recommend?

00:45:54 – Are biscuits good for production work? Do riser blocks have any negative effect on bandsaw cut quality?

00:47:42 – Austin Hardwoods book launch party!

https://www.thewoodwhisperer.com/essential-joinery-book-launch-party/

00:51:34 – Is there a recommended first aid kit in the Amazon store?

https://www.youtube.com/watch?v=GF-iKbmQzFc

https://www.amazon.com/shop/thewoodwhisperer?listId=MUCBTHY2XFPZ

00:52:26 – What is your favorite tool in the shop?

00:53:55 – More Matt Cremona jokes!

00:55:00 – Have you ever used glue-sizing for a work surface?

00:56:13 – How do I get wax out of a project that is stuck in the grain after finishing?

00:57:50 – Has anyone carried a 15″ planer into the basement?

00:59:27 – Is pressure treated lumber ok for a bench build?

01:02:40 – Can you review your wax buffing process?

01:06:03 – New season of The Wood Whisperer on Amazon prime!

https://www.amazon.com/gp/video/detail/B07PLZMJ3M/ref=atv_dp_season_select_atf

Products recommended by Marc

https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post It’s Not Ideal – Friday Live! appeared first on The Wood Whisperer.

Twin Turbo Vise – Friday Live!

Andy’s Kickstarter: https://www.kickstarter.com/projects/2121995757/twin-turbo-vise?ref=user_menu

00:02:08 – Happy Friday everyone!

00:02:15 – Guest Andy Klein introduction

00:02:40 – Twin screw vice introduction

00:10:35 – Are there dust issues inside with the bottom open on the twin screw vice?

00:17:26 – Will there be a kit available instead of a manufactured vice?

00:18:18 – What’s the throat capacity?

00:18:57 – Will there be a future option to have a centered dog hole?

00:19:36 – Will you need to lube the gears?

00:22:09 – Unnecessary closeup!

00:23:00 – Closeup of screws and mounting area

00:24:27 – Will there be a warranty?

00:24:42 – Current price?

00:25:30 – New liner material for twin screw vice

00:27:42 – Will the acrylic be proud of the vice in the final product?

00:30:04 – Will it work on a split top Roubo?

00:30:45 – Thank you’s

www.teamhenrydesigns.com

https://www.instagram.com/teamhenryde...

00:35:00 – Jointer or planer upgrade first?

00:36:02 – Can you run the clamp vertical

00:37:30 – Do Lie Nielsen planes need to be sharpened first?

00:38:27 – Drilling out mortises

00:40:27 – Is there anyway to know if a blade lost its temper?

00:42:15 – What finishing product affects the color of wood the least?

00:45:16 – Is the last guild meeting available somewhere?

https://thewoodwhispererguild.com/events/guild-meetings/marking-lines-on-dark-wood/

00:45:59 – What jigsaw would you recommend?

00:46:58 – Poll: What kind of vice do you have on your bench

00:49:29 – What is your favorite wood of all sorts of categories?

00:51:50 – What finishing brings out ray fleck in quarter sawn wood the best?

00:53:53 – Dust collection in an apartment with hand tools?

00:54:53 – Grain direction in stiles in the writing desk project

https://thewoodwhispererguild.com/product/writing-desk/

00:56:09 – What cameras do you use?

00:57:00 – Protective pads on the bottom of the legs?

00:58:48 – Drawbored mortise and tenons question

https://www.thewoodwhisperer.com/videos/drawbored-mortise-tenon/

01:01:07 – Has Andy seen his vice installed on a nickelson style bench?

01:02:42 – Does the CrowdCast system allow for questions to be asked ahead of time?

01:04:04 – Is there going to be a Steampunk special edition vice?

01:05:50 – What is the purpose of round headed mallets?

01:07:00 – What would be a good wood to use in the chest of draws for the web frames to keep the cost down?

https://thewoodwhispererguild.com/product/modern-chest-of-drawers-nightstand/

01:07:20 – Anyone use Andy’s vice and a tail vice?

01:08:22 – Do you have a style of bench conducive for Andy’s vice?

The post Twin Turbo Vise – Friday Live! appeared first on The Wood Whisperer.

Round Oak Table with Osmo Polyx-Oil Pure

My brother in law Jason and his family recently moved to Colorado. That means I have a new shop helper and he has a new house that is in need of furniture. When I saw their small round kitchen table in its new larger home, I knew we had to do something. The original top was only 36″ in diameter and actually looked oddly small for the base it sat on. So I offered to make them a new 48″ top that would also match their newly-refinished red oak floors. A quick weekend project!

Here are some of the products shown in the video.

Osmo Polyx Pure
Osmo Top Oil
George Costanza Poster
Titebond Extend
Glue Roller
White Abrasive ROS Pads
Plastic Spreader
Timbermate Pore Filler

The post Round Oak Table with Osmo Polyx-Oil Pure appeared first on The Wood Whisperer.