Marc Spagnuolo's Blog, page 36
July 2, 2019
Hall Tree Storage Bench
For full plans and the entire video series, check out the Wood Whisperer Guild.
With a family of four, it doesn’t take long for a laundry room or mudroom space to become out of control. Jackets, hats, shoes, and gloves are strewn about everywhere making it easy for our bulldog Duggee to find his next favorite chew toy. We were in desperate need of organization and a large Hall Tree Storage Bench was just the ticket. This project is made from plywood with solid frames (alder) and is painted and clear-coated for additional durability. The color and style was made to match the cabinetry already existing in the space.
Stuff featured in the video (these links are affiliate links and making purchases using these links helps support our business, which we really appreciate):
Powermatic PM2000
Powematic PM1500
Festool Domino
Festool TS55 Track Saw
Festool OF1400 Router
Milwaukee Fuel Jigsaw
Titebond Hide Glue
Titebond Original
Titebond Quick & Thick
Jessem Stock Guides
General Finishes Lamp Black Milk Paint
General Finishes High Performance Satin
Fuji Q5 HVLP Turbine
The post Hall Tree Storage Bench appeared first on The Wood Whisperer.
June 28, 2019
Pooterball and Cysts – Friday Live!
3:48 – Welcome to Friday Live!
4:06 – You can get Friday Live on iTunes\Other feed readers
4:21 – Thanks to our new Patreon supporters!
5:50 – Thanks to MPowerTools for being understanding!
7:44 – Any advice on sticky jet parallel clamps?
9:34 – What router bits do you recommend for all around work?
10:44 – What is your most used router bit?
12:23 – What pencil do you use for marking dark woods?
https://amzn.to/300SMzj
https://amzn.to/2XgdLkI
15:!0 – How do I prevent “bouncing” on a drum sander?
17:53 – What are the differences between the 3 different whiteside spiral bits?
Can you sharpen router bits?
20:41 – Opinions on Clearvue Vs. Oneida?
23:20 – What router motor should I put in my new router lift?
25:22 – What advantage do dovetail chisels give you over standard chisels when working on dovetails?
28:27 – Marc & Nicole will be at AWFS at the Titebond booth.
30:01 – Is there an easy way to tell when you need to change your ROS disc?
31:49 – Any advice on drum sander sizes?
33:34 – Do you have information on exotic woods such as Paduuk
36:23 – Old combination planer, should I just replace it or upgrade it?
39:07 – How would you cut the back curve on the Hank chair without a bandsaw?
41:27 – Guild Mentorships are back!
42:04 – What air quality meter do you use?
47:37 – Special military flag table project
50:02 – New chat on The Wood Whisperer Guild site!
https://thewoodwhispererguild.com/
50:47 – Is there a general rule for the size of wood you can resaw from 4/4, 8/4, etc.?
54:11 – What’s a jointer alternative?
55:11 – Can you resaw on a 14″ 1 1/2 HP bandsaw Or should I go with more power?
57:11 – Make sure you check the release year on guild projects?
1:00:21 – First bandsaw for woodturning?
1:02:56 – Should I upgrade my DeWalt planer to a helical head?
1:08:00 – What blade should I put on my PM 66?
1:09:56 – Where did you get your small hand saw?
1:11:00 – What do you use to scrape glue off?
1:12:30 – I have a riser block on my PM bandsaw and it is causing problems, is this normal?
1:14:40 – Do you have any safety tips for finishing in your garage?
1:20:02 – My Japanese chisel feel sticky after sharpening, do yours?
Looking to get your question answered at the top of the show? Become a patron! https://www.patreon.com/woodwhisperer
Looking for the products and tools Marc uses and recommends? You can find them at our US Amazon store: https://www.amazon.com/shop/thewoodwhisperer or Canada Amazon Store
https://www.amazon.ca/shop/thewoodwhisperer
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post Pooterball and Cysts – Friday Live! appeared first on The Wood Whisperer.
June 21, 2019
Hide Yo Wheat! – Friday Live
00:02:28 – It’s Friday Live!
00:02:50 – Thanks to our new Patreon supporters https://www.patreon.com/woodwhisperer
00:05:02 – Thank yous!
00:06:25 – New Wood Whisperer video!
https://www.youtube.com/watch?v=ws1D23zzCVc
00:07:20 – Wood Whisperer store will be on break starting this Sunday. Order now to have it shipped before TWWMom goes on vacation http://twwstore.com
00:09:05 – Is there a rule of thumb for roundover sizes?
00:11:50 – What are the pros and cons of thin kerfed blades?
00:14:17 – What material would you recommend for a photo backdrop?
00:16:47 – What would you look for in a drill press if you were looking for one now?
00:19:00 – What’s the software you use for streaming?
00:19:50 – Do you still have the Bosch mitre saw? https://www.youtube.com/watch?v=-tSuMrwrhkU
00:21:15 – What type of wood would you use for the Rockler quick release vice?
00:24:20 – Do you have a video about shellac and french polish?
00:25:15 – Do you use finish on the inside of a drawer of the shaker table?
00:28:45 – Do you miss the sliding feature of your old mitre saw?
00:31:00 – Do “batman ear” chippers cause issues in dado stacks?
00:33:20 – What paper do you recommend under glueups to catch drips?
00:35:00 – How do you route safely using a template on a router table?
00:37:28 – Do sandpaper erasers really help?
00:39:45 – Any recommendations for getting rough lumber?
https://www.bellforestproducts.com/
00:41:40 – Do you ever use reinforcement when making solid wood side panels?
00:42:25 – What do you think of using splines instead of dominoes or biscuits for a table top?
00:43:57 – Do you ever feel like you’re running out of new things to build? Where do you find inspiration to get yourself out of that spell?
00:45:44 – What’s your final sanding grit before finishing?
00:47:23 – Would you change the size of your overhang on your Roubo if you change your tail vise?
https://thewoodwhispererguild.com/product/split-top-roubo-workbench/
00:49:34 – Free guild project! Hide yo’ wheat!
00:49:50 – Guild Scholarship application https://www.thewoodwhisperer.com/scholarship/
00:53:20 – Which of the guild projects would be best suited for the beginner?
https://thewoodwhispererguild.com/product/shaker-table/
00:56:07 – Can you put a dado stack on a sliding mitre saw?
Products recommended by Marc
https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer
Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post Hide Yo Wheat! – Friday Live appeared first on The Wood Whisperer.
But I Don’t Have A Domino – Loose Mortise and Tenon Joints
The Festool Domino was introduced in 2007 and I was fortunate enough to work with Festool at the time. So the Domino came into my shop has been something of a blessing and a curse ever since. The people who can afford one and love it tend to embrace it for the time-saving invention it is. There really isn’t a faster way to create a mortise and tenon joint. But for those who can’t afford it, don’t want to buy it, or generally don’t like the brand Festool, the Domino is the worst thing to happen to humanity since
But what about that fancy router? I’m using a Festool OF1400 which is one of the best routers on the market. I use it for it’s creature comforts like dust collection, ease of handling, and micro-adjusting edge guide. This technique requires NONE of those creature comforts. If you have a router that plunges and has an edge guide, you can do this technique.
Essential Joinery (autographed copy)
Essential Joinery Book (Amazon)
Hank Chair Guild Build
Dining Chair Guild Build
Festool Domino
I like to use an upspiral bit for this work
OF1400 Router
The post But I Don’t Have A Domino – Loose Mortise and Tenon Joints appeared first on The Wood Whisperer.
June 14, 2019
Mid-Century Modern Dining Table
I sat down to design a new dining table for my brother-in-law Jason and before I was done I realized it was totally inspired by my time with Jory Brigham. The table has splayed legs, a large overhanging top, and bevels and tapers galore. Plans will be available soon. Since I haven’t put out a video in a while, I didn’t want to delay the release for the plans.
Jory’s Hank Chair Build
White Pencil
Glue Roller
The post Mid-Century Modern Dining Table appeared first on The Wood Whisperer.
Drain Your Tank – Friday Live
00:03:57 – It’s Friday Live!
00:04:07 – Announcement! Application closes for guild scholarships at the end of June
00:06:24 – Mid Century Dining Table video release
https://www.youtube.com/watch?v=kI5RNI7nH_I
00:07:20 – Do you have a schedule for when you’re going to have a live stream? http://www.thewoodwhisperer.com/calendar/
00:10:24 – What are the pros and cons of always using a zero clearance insert for a 90 degree cut on the tablesaw?
00:13:45 – What should I use to finish a toy chest?
00:16:03 – New TWW store location
https://thewoodwhispererguild.com/store/extras/
00:18:30 – Do you have any strategies for what offcuts you keep?
00:21:20 – Looking to make baby toys out of wood. What glues/finishes should I use to ensure it’s safe?
00:23:50 – Do you have any perspective on tabletop CNC machines?
00:25:33 – Has there been any thoughts on Jason being the focus of a video with his experience getting into woodworking?
00:29:00 – Is there anything you would have done differently in your current shop setup?
https://www.thewoodwhisperer.com/videos/2017-shop-tour/
00:30:30 – Looking on buying a good router plane. Do you have a preference on brands?
00:31:40 – Rank the level of enjoyment in the following processes: Designing, Building, Finishing, Instruct
00:32:20 – Why did you exclude sap wood in your recent dining table video?
00:33:31 – Can I use Osmo over a non-film pre-finished surface?
00:34:50 – Can the Incra mitre sleds be used on a benchtop tablesaw?
00:35:20 – Is black walnut an overly oily wood and would it affect a glue up?
00:36:20 – Can I prevent lumber from warping while it’s acclimating?
00:39:20 – Would you like to build a river table? If not, why?
https://thewoodwhispererguild.com/product/waterfall-glass-resin-tables/
00:40:15 – Do I need to be concerned with moisture in an air system if I’m just using to to blow off dust?
00:41:25 – How much acclimation do you need to do in Denver’s climate?
00:43:00 – Would you ever use a crosscut sled over a mitre gauge?
00:44:55 – How straight is straight enough for a king size bed rail?
00:46:46 – Any issues with a 1/8″ bottom for the bottom of the hidden drawer for the Greene and Greene blanket chest?
https://thewoodwhispererguild.com/product/gg-blanket-chest/
00:48:10 – What wood would you recommend for baby toys?
00:49:45 – Thinking about building my own router table. Any advice?
https://www.thisoldhouse.com/new-yankee-workshop?season=15
00:52:25 – I don’t see box / finger joints in Essential Joinery. Is there always a better choice?
https://thewoodwhispererguild.com/product/essential-joinery-book/
00:54:00 – Do you have recommendations for fixing a hard maple sign where one board has warped?
00:55:05 – How’s the outdoor Epifanes varnish holding up?
https://www.thewoodwhisperer.com/videos/durable-outdoor-finish/
00:59:45 – Would sapele be ok for outdoor furniture?
01:00:23 – Can you do a video of how old projects are holding up?
https://www.thewoodwhisperer.com/videos/humble-pie/
01:01:49 – What bandsaw blades do you buy?
01:03:10 – How much milk paint did you go through on the hall tree project?
https://thewoodwhispererguild.com/product/hall-tree-storage-bench/
01:03:50 – Can you do two of the alternatives for the lower versions of the Greene and Greene blanket chest?
01:04:48 – Nicole, what’s your next quilting project? https://listalu.com/
01:08:14 – Any thoughts on building a quilt rack?
01:08:35 – Did you get any of your tats done in Colorado? http://thinktanktattoosouth.com/
01:09:55 – I have parana pine boards that have a finish on them. Do I need to strip them before planing them to 3/8″?
01:11:25 – Any build style / design ideas in mind for the undercabinet workbench for the roubo?
https://thewoodwhispererguild.com/product/under-workbench-cabinet/
01:12:25 – Will UV darken cherry quicker if I don’t want to use stain?
https://thewoodwhispererguild.com/product/shaker-table/
01:16:25 – Guild project winner – Congratulations!
01:17:40 – Has Dougie picked a favorite furniture style for gnawing?
01:18:50 – What about Millie?
Products recommended by Marc
https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer
Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post Drain Your Tank – Friday Live appeared first on The Wood Whisperer.
June 7, 2019
Doing the Cabbage Patch – Friday Live
00:01:07 – Good morning everybody!
00:01:37 – Hey, it’s Friday Live!
00:02:00 – Thanks to our Patreon supporters!
00:02:30 – Last day for Hank Chair project preorder.
00:05:15 – Thank you, Nicholas!
00:08:10 – When making mortise and tenons, what are the factors you use to determine the sizings?
00:10:29 – I have an issue when I’m milling my lumber. When I use my crosscut sled, my result comes out of square, even though my sled is square to my blade. What could it be?
00:13:10 – How would you join structurally solid wooden shelves to a frame and panel sides?
00:15:15 – Would you rather use your Incra 5000 for mitre cuts or your mitre saw?
00:16:45 – How can I sand or scrape a glue up of maple and cedar with the cedar being significantly softer?
00:19:42 – Do you have any suggestions for how to organize all the extra hardware you get throughout a product or new purchase?
00:27:35 – Any suggestions on maintaining my table saw top?
https://www.amazon.com/dp/B00ODZM7SG/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
00:29:35 – What direction do I go with a router?
00:31:00 – I made a mortise on a project but am switching to a domino. Can I fill in the mortise and then plunge with the domino?
00:31:45 – Can I add a stretcher to the inside of the waterfall table? How would I add it?
https://thewoodwhispererguild.com/product/waterfall-glass-resin-tables/
00:33:04 – What do you buff with in your videos?
00:34:55 – What’s the most cost effective way of doing shop cabinetry?
00:37:10 – How can you prevent blue painter’s tape from marring the surface of plywood when pulling it up?
00:38:45 – What is the most comfortable chair you’ve built?
https://thewoodwhispererguild.com/product/morris-chair/
00:39:10 – What is the most difficult project you’ve built?
https://thewoodwhispererguild.com/product/sculpted-rocker/
00:40:25 – How are you planning on finishing the top of the dining table you’re building?
00:43:32 – Can you replace dominos with loose tenons on the Hank Chair?
https://thewoodwhispererguild.com/product/hank-chair/
00:45:50 – What kind of ebony is used for Greene and Greene plugs?
00:46:55 – How was the barbeque class?
00:48:25 – Can water based poly be wet sanded?
00:49:50 – What is your most challenging project to build?…again
00:50:50 – Can you add the Fuji HVLP to the WoodWhisperer Amazon shop before I buy it?
00:53:00 – Are you going to play any Classic WoW?
00:53:47 – Do you know of any aftermarket drill stops that are not the two nut adjustment type?
00:56:15 – Who would you consider your woodworking inspiration? Has it changed over the years?
00:59:06 – Guild project winner! Congratulations Jason!
Products recommended by Marc
https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer
Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post Doing the Cabbage Patch – Friday Live appeared first on The Wood Whisperer.
May 31, 2019
Woodworking, BBQ and Quilting! – Friday Live
00:00:56 – Good morning everybody! It’s Friday Live
00:01:14 – New summer start time for Friday Lives
00:02:30 – Thank you to the new Patreon subscribers!
https://www.patreon.com/woodwhisperer
00:04:10 – Thank yous!
https://www.stevenraichlen.com/
00:07:46 – Sweater quilt!
00:09:20 – Table leg preview and design thoughts
00:15:55 – Do you sell different shaped card scrapers?
https://thewoodwhispererguild.com/product/tww-card-scraper/
00:16:45 – What would you use for shop furniture?
00:19:15 – Do you have your own recipe for tomato pie?
https://www.youtube.com/watch?v=sZ1W8_q3FDk
00:20:15 – Do you do anything differently if you know your end product will be painted vs finished?
00:22:38 – Can you talk about your decision to use milk paint on the hall tree project?
https://thewoodwhispererguild.com/product/hall-tree-storage-bench/
https://www.youtube.com/watch?v=T4yMa3LQKQ0
00:25:35 – Should I wait for the mineral spirits to dry before applying the first coat of finish?
00:26:54 – Should I buy a jointer or planer first?
https://www.thewoodwhisperer.com/articles/which-comes-first-planer-or-jointer/
00:28:18 – What do you look for when you’re designing for complementary colors?
00:31:23 – Guild Scholarships
https://www.thewoodwhisperer.com/scholarship/
https://thewoodwhispererguild.com/product/guild-scholarship-program-donation/
00:34:42 – What is your opinion on the Festool MFT and how do you use it?
00:38:09 – Is there a guild project focused on hand tool users?
https://www.handtoolschool.net/
00:40:30 – Can you do a router basics video?
00:42:23 – How do you select what wood you’re going to use when starting a project?
00:45:03 – How much overspray can you expect while using HVLP? Would you consider doing it indoors?
00:47:10 – Any recommendations on a good budget HVLP system?
00:51:21 – Do you have a video on the setup and usage of HVLP?
https://www.thewoodwhisperer.com/?post_type=video&s=hvlp
00:54:11 – Thank you for the tracksaw giveaway from last week!
00:55:00 – Any details on the future turning guild project with Ashley?
00:55:30 – What exactly is the difference between milk paint and latex paint?
00:56:57 – Any hints to hide seems under paint?
00:58:35 – Any suggestions for complimentary woods for a wormy ambrosia maple?
00:59:10 – Do you have any videos on using wood filler?
https://www.thewoodwhisperer.com/videos/rubbing-out-a-high-gloss-finish/
01:00:52 – Do you think a mortise and tenon is strong enough for a baby/dog gate?
https://www.amazon.com/dp/1440329605/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
01:01:45 – Can a block plane also be used as a shoulder plane if the blade goes all the way to the edge?
01:04:55 – G&G Adirondack Chair project sale!
https://thewoodwhispererguild.com/product/gg-adirondack-chair/
01:06:47 – How can I get rid of the oily feeling of my cutting board?
01:08:19 – Phil Gordon!
https://www.youtube.com/watch?v=MKydXyqvkEs
01:08:58 – Deadpool bandsaw box
https://www.youtube.com/watch?v=yJnHnaug4i8
01:10:42 – Guild project winner! Congratulations Nick!
01:15:00 – Official request for an updated lumber yard video!
https://www.youtube.com/watch?v=e2FNYJMkP-o
Products recommended by Marc
https://www.amazon.com/shop/thewoodwh...
Canada! http://amazon.ca/shop/thewoodwhisperer
Friday Live as a podcast: https://itunes.apple.com/us/podcast/w...
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post Woodworking, BBQ and Quilting! – Friday Live appeared first on The Wood Whisperer.
May 24, 2019
Woodworking Rabbit Holes – Friday Live
00:01:35 – Hey everybody, it’s Friday Live!
00:02:40 – Is a floor model drill press worth the investment or would a benchtop suffice?
00:04:25 – Any new guild giveaways for June?
00:05:04 – How do you know what side should be pins and which should be tails when making dovetails?
00:08:50 – What’s the wedge jig under the hammers behind you?
00:09:50 – Any chance of an updated shop tour?
https://www.thewoodwhisperer.com/videos/2017-shop-tour/
00:11:05 – Any plans on doing inlays or marketry?
00:13:25 – Have you ever questioned your choice on sharing 220 circuits?
00:15:25 – What would you recommend for a sharpening system for lathe tools?
https://thewoodwhispererguild.com/product/bowl-turning/
00:17:07 – What angle do you sharpen your low angle planes? Do you need a micro bevel on them?
00:18:43 – Do the turning videos cover how to avoid work piece explosions while on the lathe?
00:19:53 – Any plans to come out to the east coast?
00:21:15 – Making a circular dining table…how big should I make the leg if it’s going to be a singular pedestal leg?
00:23:15 – Do your scrapers come pre-sharpened?
https://thewoodwhispererguild.com/product/tww-card-scraper/
00:25:00 – If you had to pick your favorite square, which one would it be?
00:25:50 – Do you have an update on your rubber flooring tiles?
https://www.thewoodwhisperer.com/articles/rubber-tiles-for-shop-flooring/
00:33:28 – When building a round table, how would you keep the table flat?
00:38:00 – Are horse stall mats a viable alternative to the rubber flooring?
00:40:25 – Any plans on doing a double chest of drawers in a shaker or craftsman style?
00:41:50 – Any chance on a new finish comparison video?
00:43:25 – Is there a huge difference between Epifanes and Total Boat’s lust varnish?
https://thewoodwhispererguild.com/product/miter-station/
00:46:25 – Do you differ from Tried and True’s application process at all?
https://www.amazon.com/dp/B003DL10MK/?cv_ct_id=amzn1.idea.3QN2LXQZFF81P&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
00:48:25 – Can you remove wax from a finished product and apply poly?
00:49:45 – Is MDF ok for a workbench top?
00:50:50 – What’s your opinion on integrating a downdraft table into your assembly table?
00:53:13 – How can you minimize the visibility of glue lines?
00:58:00 – What was your local source for hardwood when living in Temecula?
00:59:25 – Should I kerf my cherry boards before gluing up my herringbone table top to a plywood substrate?
01:02:55 – While making the bridle joint for the gaming dining table, the mortise side collapsed…how can it be fixed?
01:05:55 – Guild Project winner – congratulations Ben!
Products recommended by Marc: https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer
Friday Live as a podcast: https://itunes.apple.com/us/podcast/w...
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post Woodworking Rabbit Holes – Friday Live appeared first on The Wood Whisperer.
May 20, 2019
A Normal Show – Friday Live
03:05 – Hey everybody! It’s Friday Live.
04:23 – With the request for project ideas, any projects you’d wish to stay away from? What styles do you want to stay away from?
06:38 – Thank yous – New Patreon subscribers
07:07 – My new blades are burning the wood…any suggestions?
09:36 – First hand plane…Cosman, Veritas, Lie Nielsen?
13:07 – What’s the ideal domino size for attaching a face frame to a carcass?
15:39 – Are there any secrets for chiseling into end grain?
17:10 – Ruminations on wooden couches and love seats
19:00 – Woodpeckers adjustable track square
https://www.woodpeck.com/woodpeckers-adjustable-track-square.html
28:15 – Is the oscillation on the Jet Oscillating drum sander worth it and will it come to the Powermatic brand?
31:15 – Do you find any species move more than others? What about outdoor furniture?
34:10 – Do you have any tips to get water lox to lie flat?
36:45 – Any tips on a filler for bloodwood and purpleheart?
38:13 – My miter saw doesn’t have holes for a sacrificial fence…any suggestions?
38:50 – Do you have any plans to add upper cabinets to the miter saw project?
39:30 – Any recommendations for low VOC finishes?
https://www.amazon.com/dp/B003DKXWOA/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_lv_dp_vv_d
41:13 – I’m planning on making a tabletop and my boards ended up thinner than I wanted…am I in trouble?
43:42 – Will Rubio be a durable finish for treads on stairs?
46:00 – Woodpeckers track square winner announcement – Congrats Paul!
47:15 – Guild project winner – Congrats Brian!
48:19 – I’m placing oak stair treads over the particle board stairs. What glue should I use?
Products recommended by Marc
https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer
Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2
Support us on Patreon: https://www.patreon.com/woodwhisperer
The post A Normal Show – Friday Live appeared first on The Wood Whisperer.
