Marc Spagnuolo's Blog, page 33

Raisins for the Troops – TWW Live!

1:08 – Welcome to Friday Live!

2:00 – Nicole is participating in Treats for our Troops

2:46 – Thanks to our Patron supporters!

3:02 – Nicole was in an accident :(

6:07 – Thanks Minneapolis Woodcraft for playing Friday Live!

7:03 – Last day for discounts on the Phillip Morley table!

7:53 – Ashley Harwood spindle turning is coming soon!

8:13 – Guild weekend sale – Guest Instructor Project Sale!

8:56 – Can the Fremont nightstand be made with floating tennons or dowels?

10:34 – Guild Leather-Bound Notebook Pre-Order until Dec 1

12:15 – Pocket Knife display case coming soon to the free site!

14:02 – Cool tools – Pin vise and bits

17:01 – PM Vs. Laguna dust collector – Which one should I get?

20:24 – Do you have a smoke detector in the shop?

22:23 – Woodworkers Fighting Cancer totals!

25:20 – What made you switch from the Bosch router back to the OF1400?

27:25 – Do you find books to be the best source for inspiration and learning?

30:28 – Are you doing a video on the Festool MFT cart?

31:06 – Do you often need to buy lumber longer than you need due to twist\cupping?

32:38 – I have to do a lot of box sanding, would you recommend a disc or belt sander?

33:38 – Would the Morley table work well for extension leaves?

35:52 – Can you dye wood and then route through it?

39:05 – Can you use Festool Surfix instead of Rubio Monocoat?

41:15 – Does the Forrest Dado blade leave grooves on each side?

43:44 – Do you have a dream project you haven’t built yet?

45:00 – Is Marc starting to be intrigued by CNC?

48:23 – Can a piece of furniture accept a water based stain after using a citrus based stripper?

49:40 – My domino’s are ultra tight when dry fitting – is this normal?

52:43 – If you had to do the Roubo again, would you still use soft maple?

55:38 – How do I account for wood movement when using sliding dovetails to join a table top to the base?

57:23 – Should I be careful about sanding to certain grits before finishing?

59:41 – How do you prevent rust on your tablesaw?

1:01:21 – What would you like to do in/to your shop that you haven’t yet?

1:04:27 – What did you do before woodworking?

1:08:52 – Do you have a story behind your tattoos?

1:12:57 – What is Marc’s story?

1:16:15 – Guild project winner!

Looking to get your question answered at the top of the show? Become a patron!

Looking for the products and tools Marc uses and recommends? You can find them at our Amazon stores:

US – https://www.amazon.com/shop/thewoodwhisperer

Canada – https://www.amazon.ca/shop/thewoodwhisperer

UK – https://www.amazon.co.uk/shop/thewoodwhisperer

The stream is made possible by you! Learn more at https://www.patreon.com/woodwhisperer

The post Raisins for the Troops – TWW Live! appeared first on The Wood Whisperer.

Don’t Begrudge Me Bro! – TWW Live!

00:03:10 - It's Friday Live!
00:04:35 - Last week for Woodworkers Fighting Cancer submissions and auction update
00:06:35 - Weekend Guild Sale!
00:07:30 - Festool long life filter bag
00:11:25 - Thank you to our new Patreon subscribers!
https://www.patreon.com/woodwhisperer
00:11:45 - Knife display case
00:13:20 - Reclaimed Wood discussion
https://www.amazon.com/dp/1419738186/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
00:15:45 - Sanding blocks
https://www.amazon.com/dp/B003WUYG1E/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
https://www.amazon.com/dp/B004BBAMVQ/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
00:18:00 - Philip Morley Shop Tour
https://www.youtube.com/watch?v=y_aTeOsFKzw
https://thewoodwhispererguild.com/product/morley-kitchen-table/
00:19:05 - What is the size difference between your current shop and your old Arizona shop?
00:21:35 - What double sided tape do you use?
https://www.amazon.com/dp/B003ASGL02/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
https://www.thewoodwhisperer.com/videos/stop-buying-double-sided-tape/
00:23:25 - How much gap should you leave when building a framed in panel?
00:26:55 - Do you mark or brand your items?
00:29:23 - What's the best finish for red oak?
00:30:50 - Do you have a favorite Japenese pullsaw?
https://giantcypress.net/
00:32:50 - Do you use a humidifier in the shop?
https://www.amazon.com/dp/B004S34ISA/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
00:36:30 - My forstner bits aren't cutting well. Is it the bit or the drill press?
00:39:40 - I have streaks in my wipe on poly. Will they buff out?
00:41:30 - How have the adirondack chairs held up?
00:44:25 - How do you like your Oneida gorilla pro?
00:52:25 - What's your favorite Red Hot Chile Peppers album?
https://www.amazon.com/dp/B07K7TQWRP/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
00:53:50 - What's the best way to apply Ephiphanes?
00:55:00 - What are some tips or tricks have you learned that help glueups?
00:59:05 - What finish should I use on an outdoor swing?
01:03:50 - What do you think of Stanley's Sweetheart Chisels?
https://www.amazon.com/dp/B004TK0IG8/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d
01:05:25 - How do you decide on making a jig and using a power tool or just using hand tools?
01:07:30 - Do guild discounts work in store?
https://thewoodwhispererguild.com/member-benefits/

Products recommended by Marc
US! https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer
UK! http://amazon.co.uk/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Don’t Begrudge Me Bro! – TWW Live! appeared first on The Wood Whisperer.

Philip Morley Shop Tour

This Summer I traveled to Wimberley, Texas to film at Philip Morley’s shop. The goal was the capture the creation of the Morley Kitchen Table for the Wood Whisperer Guild. You can still get this project at the Pre-Order discount price until it launches in November. While I was there, I asked Philip to give us a little shop tour while also showing off the super handy Morley Mortiser. If you’re interested in building one you can purchase the plans here. If you’d rather buy a CNC-cut kit, you can do that here.

Thanks to Philip and his family for letting me invade their space for a week.

The post Philip Morley Shop Tour appeared first on The Wood Whisperer.

Magic Marc – TWW Live!

00:03:00 – It’s Friday Live!

00:03:22 – Guild sale!

https://thewoodwhispererguild.com/event/guild-sale-shop-furniture/?instance_id=231

00:04:40 – Thank you to our new Patreon subscribers!

https://www.patreon.com/woodwhisperer

00:05:15 – Bessey gear clamp demo

https://www.amazon.com/dp/B07JNQDP4P/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

00:09:00 – What is the reason to use a floating solid wood panel in a frame?

00:11:10 – Update on the woodworkers fighting cancer auction!

https://www.32auctions.com/wfc2019

00:12:25 – Under cabinet workbench update

https://thewoodwhispererguild.com/product/under-workbench-cabinet/

00:15:53 – How did you do the string inlay?

00:18:47 – Can I save the guild videos?

https://thewoodwhispererguild.com/faq/

00:19:45 – Can you use two shorter track joints to make one long tracksaw track?

00:20:25 – How well do the undertrack clamps work on a tracksaw?

00:21:00 – Can I rewatch guild meeting videos?

00:22:30 – Can you hit the saw blade with the Incra 5000?

00:24:50 – How can I keep my tools from rusting with condensation in the morning?

00:28:55 – What’s the drawback with solid wood doors vs frame and panel doors?

00:32:07 – Essential Joinery is in Lee Valley’s fall catalog

https://thewoodwhispererguild.com/product/essential-joinery-hard-cover/

00:33:15 – Have you checked out Veritas’ flushing chisel set?

00:33:30 – Last day to order from twwstore.com is Wednesday!

https://thewoodwhispererguild.com/store/extras/

00:35:50 – How can I cut 2″ box joints on 10/4 walnut?

https://thewoodwhispererguild.com/product/split-top-roubo-workbench/

00:38:20 – What’s hanging from Deadpool’s foot?

https://www.amazon.com/dp/B0030IT76C/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

00:39:35 – Do you ever plan on making a drum?

00:41:10 – Should I precut the holes for the hardware in the roubo?

00:43:35 – Is there a benefit on cabinet vs wall storage?

https://thewoodwhispererguild.com/product/ultimate-wall-hanging-tool-cabinet/

00:46:20 – What would be a better investment? Larger router plane with a smaller attachment or just the smaller router plane?

00:47:53 – Guild discount with Benchcrafted for roubo hardware

https://thewoodwhispererguild.com/member-benefits/

00:49:47 – How can you reach out to companies to get donations for charity pieces?

00:52:04 – Does the Benchcrafted hardware ever go on sale?

00:52:35 – Would you replace the leg vice with a Andy Klein’s twin turbo vice?

https://www.thewoodwhisperer.com/tww_live/twin-turbo-vise-friday-live/

00:53:55 – How many coats of spray laquer would do you use before buffing with paste wax?

00:54:30 – Are the adirondack chairs comfortable to sit in?

https://thewoodwhispererguild.com/product/gg-adirondack-chair/

00:55:40 – How do you like your table saw fence?

https://vsctools.com/shop/product-category/table-saw-fence/

https://www.youtube.com/user/askwoodman

00:58:35 – Can we make slight modifications to the WWFC project? Deadline is October 31st

https://www.thewoodwhisperer.com/videos/elevated-dog-bowl-wfc-2019/

00:59:10 – What are your next top 5 projects in your queue?

01:00:30 – Can you have a European style hinge without the hole in the door?

01:01:53 – Do I need a double bevel miter saw?

https://thewoodwhispererguild.com/product/miter-station/

01:03:35 – Where is the finishing the finish video?

https://www.thewoodwhisperer.com/guides/finishing/

01:05:12 – Which chest of drawers project would you recommend?

https://thewoodwhispererguild.com/product/chest-of-drawers/

01:06:28 – What’s your stance on sharpening a router bit vs getting a new one?

01:07:50 – What kind of science background did you have?

01:10:55 – What’s the best finish for ash that won’t cause it to yellow?

01:12:47 – What white pencil do you use?

https://www.amazon.com/dp/B004BPOZAG/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

https://www.amazon.com/dp/B004M5BGD4/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

01:14:30 – How to cut a 45 on a wide panel without a tracksaw?

01:15:30 – Is there a benefit to you if we watch ads all the way through?

01:18:20 – Guild project winner! Congratulations!

Products recommended by Marc

US! https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

UK! https://www.amazon.co.uk/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Magic Marc – TWW Live! appeared first on The Wood Whisperer.

Vegan Slides – TWW Live!

00:02:34 – It’s Friday Live!

00:03:08 – Thank you to our new Patreon subscribers!

https://www.patreon.com/woodwhisperer

00:04:12 – Stuff that holds books project sale!

https://thewoodwhispererguild.com/event/guild-sale-book-storage/?instance_id=230

00:05:10 – Mini split update

00:07:06 – Do you have an insulated concrete slab in your garage?

00:09:08 – How can I clamp prefinished items that I usually use painters tape as a clamping solution?

00:11:55 – Any tips for gluing up thin panels?

00:13:15 – What’s the best way to build an exterior door out of walnut?

00:14:33 – Have you seen plans for a bar stool with a similar design to the Maloof Rocker?

https://thewoodwhispererguild.com/product/sculpted-rocker/

00:15:37 – How are you liking the new Veritas planes?

00:16:25 – What are some of your qualifications to inviting someone to be a guild instructor?

00:18:05 – What’s the difference between upcut and downcut spiral bit and their applications?

00:21:15 – Under workbench cabinet preorder ends today

https://thewoodwhispererguild.com/product/under-workbench-cabinet/

00:23:15 – Have you ever experienced condensation problems in the shop in cold mornings?

00:24:10 – How can I apply OSMO on a small project with tight curves?

https://thewoodwhispererguild.com/product/jewelry-box/

00:25:35 – Do you prefinish pieces before glueup?

00:27:00 – How can I prevent sag on a long entertainment center top?

00:29:00 – Why are leg vises traditionally on the left side of a workbench?

00:30:50 – I’m building acrylic finished countertops. Do you have an inexpensive alternative?

00:33:12 – What do you recommend for a starter set of sharpening stones?

00:35:05 – What are your thoughts on the Incra Miter 5000?

00:38:12 – Have you thought about getting the Incra box joint jig?

00:40:30 – I’m getting tearout with an upcut sprial bit…would a downcut or straight bit be cleaner?

00:41:05 – What’s the best epoxy to use?

00:42:15 – Any suggestions for a cyclone dust collector?

00:43:00 – How critical are jointers and planers for new woodworkers?

00:44:25 – Can hard wax oils be used on pens?

00:45:35 – What are some of your most used shop-made jigs?

00:48:20 – What’s the best guild project for a beginner?

https://thewoodwhispererguild.com/product/shaker-table/

00:51:10 – How’d you transition from a hobbyist to what you are now?

https://www.thewoodwhisperer.com/about/

00:56:25 – When’s the next episode of WoodTalk?

00:56:55 – We met our auction goal! Auctions close on the 20th.

https://www.32auctions.com/wfc2019

00:57:30 – Have the rubber floor mats helped your back and feet?

00:59:10 – Any suggestions for stabilizing premilled lumber?

https://www.amazon.com/dp/B0793GSD39/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

01:02:25 – Any thoughts on the JessEm router table?

01:04:12 – What guild project would sell best?

01:05:26 – What approach did you take when building your collection of power tools?

01:09:10 – Is there a recommended depth for a dado?

01:11:30 – What’s a non shiny durable finish for a walnut computer desk that can resist pen and pencil marks?

https://www.thewoodwhisperer.com/videos/wiping-varnish-shootout/

01:13:15 – Have you made a sit stand desk?

Products recommended by Marc

US! https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

UK! http://amazon.co.uk/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post Vegan Slides – TWW Live! appeared first on The Wood Whisperer.

A Fancy Breadbox

The bread box is making a comeback! I don’t know if that’s true, but I just wrote it on the internet so it must be! With the resurgence of fresh-baked wholesome bread, it only stands to reason that we need to bring the bread box back! My wife Nicole is a big fan of bread boxes and we’ve had a metal one that has served us well for years, but she has always wanted something more elegant made from wood. I looked at a bunch of designs and none of them had the look I was hoping to achieve, so I set out to build something with a sleek and smooth appearance made from figured wood with a copper punch panel accent.

This project is available in the Wood Whisperer Guild so if you’re interested in the plans and full set of videos, head on over.

Special thanks to our sponsors Powermatic, Titebond, and Brusso Hardware.

Stuff used in the video:

Brusso CB-302 Hinges
Glue Roller
Titebond Liquid Hide Glue

The post A Fancy Breadbox appeared first on The Wood Whisperer.

Double Downing in the Walled Garden – TWW Live

00:01:07 – It’s Friday Live!

00:02:04 – Holiday sales have started!

https://thewoodwhispererguild.com/event/guild-sale-executive-writing-desk/?instance_id=226

00:05:05 – Mail Time!

https://www.kilroysworkshop.com/

00:09:19 – Why are you not replacing your number 7 plane with a Veritas plane?

00:10:50 – Old hand plane auction

https://www.32auctions.com/wfc2019

00:13:23 – What options do you have for a lower shelf in a bookcase with solid wood that’s fully enclosed on all four sides?

00:15:00 – Thanks for the podcast version for Friday Live!

https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

00:16:15 – Should I prime poplar wood before spraying milk paint?

00:17:20 – How can you start woodworking without a shop?

00:20:00 – Can you talk a bit about cabinet construction material?

00:22:30 – Will you ever do a file cabinet in the guild?

00:23:20 – Can you burn finished wood?

00:25:40 – How do you know when something is “good enough”?

00:27:57 – Can you have cleats on the bottom of a tabletop to provide support?

00:29:48 – Is it better to mount drawer slides then size the drawer or vice versa?

00:31:40 – What epoxy would you use as a finish?

00:32:45 – Can you do a detailed episode on hand plane setup?

00:34:25 – Woodworkers Fighting Cancer mug

https://thewoodwhispererguild.com/product/woodworkers-fighting-cancer-mug/

00:35:55 – Will there be a hybrid woodworking volume 2?

https://thewoodwhispererguild.com/product/hybrid-woodworking-book/

00:39:00 – Are dovetails strong than some dado drawer construction?

00:39:55 – What Festool vacuum do you recommend?

00:41:20 – What’s your dust collection method for handheld power tools?

00:42:07 – Is water-based poly ok for the dog bowl bench?

https://www.amazon.com/dp/B0073DRPX2/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

00:43:10 – Any tips on getting purple heart to be purple again?

00:44:02 – Can running a planed side of lumber over a jointer remove snipe?

00:45:25 – What kid would you have named after a wood species?

00:46:27 – How much time does it take to set up a Veritas hand plane?

00:47:00 – Have you ever considered building a coffin or casket?

00:48:55 – Would you ever make a chimney cupboard for a guild project?

00:50:20 – How’d you pick The Wood Whisperer as the name?

00:52:45 – When is the next guild meeting?

https://thewoodwhispererguild.com/calendar-2/

00:53:00 – What resources did you find useful when starting your business?

https://www.amazon.com/dp/161268050X/?cv_ct_id=amzn1.idea.2FDNPTMSOGTDJ&cv_ct_pg=storefront&cv_ct_wn=aip-storefront&ref=exp_cov_thewoodwhisperer_dp_vv_d

00:59:55 – What’s your favorite wood?

01:00:30 – What’s your opinion on Rockler Bench Dog planes?

01:02:05 – Do you have an opinion on Maker’s Playground?

01:06:20 – Is there a decent used tool website?

01:08:14 – What bench would you pick? Torsion box or thick slab top?

01:10:05 – Will you ever have Danish modern furniture in the guild?

01:11:10 – Guild project winner! Congratulations!

01:13:10 – Should I download the guild project videos?

Products recommended by Marc

US! https://www.amazon.com/shop/thewoodwhisperer

Canada! http://amazon.ca/shop/thewoodwhisperer

UK! https://www.amazon.co.uk/shop/thewoodwhisperer

Friday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support the show on Patreon and get some cool rewards!��https://www.patreon.com/woodwhisperer

The post Double Downing in the Walled Garden – TWW Live appeared first on The Wood Whisperer.

Repurposed Outdoor Coffee Table

In 2013 I built a table for my backyard in Arizona. Watch the build here. After moving to Denver, I decided to refinish the table in hopes of giving it a “bulletproof coating” that could take anything this high elevation environment could dish out. Watch the refinish video here. Unfortunately, the finish didn’t hold up as well as I had hoped and I decided to dismantle the table and repurpose the material for a coffee table.

To ensure this table doesn’t suffer the same fate as the previous one, I made three important changes:

I included slats in the top to allow for drainage.
I used a hardwax oil finish (Osmo One Coat) containing pigments and no film. The pigments will help block UV rays and the finish won’t crack or peel.
The table will live under a covered area of the patio. This greatly reduces exposure to UV, rain, and snow.

Hopefully, this table will last a lot longer with yearly maintenance. If necessary, I plan to lightly sand the table and then reapply a new coat of the same finish.

There are no plans for this project since I pretty much designed on the fly with the material I had on-hand.

Looking for Ramone’s Domino Dock? Get one here!

The post Repurposed Outdoor Coffee Table appeared first on The Wood Whisperer.

The Veritas Lie-Nielsen Personality Test

Part 1

– There are 2 videos this week since Marc forgot to plug in his computer :)

1:30 – Welcome to Friday Live!

1:50 – Canvas Aprons and Woodworkers Fighting Cancer mugs for sale

https://twwstore.com

4:58 – WoodWorkers Fighting Cancer – Bid on Marc’s Dog Feeder!

https://www.32auctions.com/organizations/27052/auctions/69003/auction_items/1911053

6:15 – WoodWorkers Fighting Cancer – Bid on Lunch with Nicole, Marc, and Jason!

https://www.32auctions.com/organizations/27052/auctions/69003/auction_items/1915928

Technical Difficulties for Part 2 https://youtu.be/H9IxwiHTTAQ

Part 2 – https://youtu.be/H9IxwiHTTAQ

1:06 – Build The WoodWorkers Fighting Cancer Project!

https://www.thewoodwhisperer.com/videos/elevated-dog-bowl-wfc-2019/

1:45 – Do you have accessory recommendations for the MFT/3 Besides the Flip Stop?

4:54 – Can you do a video using Blum tandem motion slides?

https://thewoodwhispererguild.com/product/executive-desk/

5:31 – Do you have any ideas for Shaker style drawer fronts?

6:55 – Saw blade is lifting wood instead of cutting – What can be done?

9:05 – Can you use a flat top grind blade with miters?

10:15 – Marc did an interview on The Dad Chronicles Podcast
https://thedadchronicle.podbean.com/e/tdc-83-the-wood-whisperer-marc-spagnuolos-story/

12:08 – Would you use Osmo Top Oil on a cutting Board?

13:44 – Can The WoodWorkers Fighting Cancer build be a slightly different design?

14:23 – If you can only build one type of furniture from now on, what would you build?

15:55 – Have you ever taken a personality test? How has it helped you in your business?

21:44 – What do you use to flatten your waterstones?

DMT link

22:20 – Has your approach tot tool sharpening changed since the 2012 video?

https://www.thewoodwhisperer.com/videos/my-sharpening-system/

23:43 – What was your most personally rewarding build and why?

Maui Hook

https://www.thewoodwhisperer.com/videos/make-kid-size-mauis-hook-2×4/

Jewlery Box

https://thewoodwhispererguild.com/product/jewelry-box/

Rocker

https://thewoodwhispererguild.com/product/sculpted-rocker/

25:11 – Plywood Walnut and Solid Walnut, do I need to stain to color match?

27:22 – What do you use for a bandsaw resaw fence?

Veneer Fence Link Making your own Veneer Episode 16 https://www.thewoodwhisperer.com/videos/wish-you-veneer/

28:55 – Have you done a DNA test to see if you are related to a famous woodworker?

30:17 – How do you choose your edge banding veneer?

31:32 – Have you ever used FastCap stick on edge banding?

31:47 – Can you explain the sale of projects?

34:30 – Any recommendations for blades for the LN LAJ plane?

36:59 – Why is Marc selling\auctioning his LN planes? http://32auctions.com/wfc2019

39:46 – Does Marc have any snipe issues with his jointer\planer? How do you account for it?

42:14 – Ground or whole bean coffee?

45:45 – What uses are the siderails on the MFT?

46:34 – Do you have experience with the Festool track connectors?

48:24 – For Epifanes Matte, is a layer from this protection enough, or should you use it as a final topcoat?

49:51 – Can you use a 14″ artists gauge to square a miter gauge?

51:15 – Do you always have a board screwed into your chop saw?

52:56 – Do you think there is any area that a newbie SHOULDN’T use to learn from?

59:47 – When is the next Woodtalk episode?

http://www.woodtalkshow.com/

1:00:48 – What broom do you use to clean the shop?

1:03:32 – What order do you cut\sand\assemble box joints in?

1:04:40 – Do you still have Essential Joinery books?

https://thewoodwhispererguild.com/product/essential-joinery-book/

https://thewoodwhispererguild.com/product/essential-joinery-hard-cover/

1:05:40 – Who has to operate the broom\vac – Marc or Jay?

1:06:00 – How do you organize your scrap?

1:07:11 – What CFM Dust Collector do you suggest for a 20×20 shop?

1:07:52 – When will the MFT cabinet video be on the free site?

1:12:20 – WoodWorkers Fighting Cancer is a very important fundraiser and mission

1:13:08 – Guild Project Winner!Woodworkers Fighting Cancer Website

http://woodworkersfightingcancer.comWoodworkers Fighting Cancer Auctions

https://www.32auctions.com/wfc2019

Products recommended by Marc
US! https://www.amazon.com/shop/thewoodwhisperer
Canada! http://amazon.ca/shop/thewoodwhisperer

UK! https://www.amazon.co.uk/shop/thewoodwhispererFriday Live as a podcast: https://itunes.apple.com/us/podcast/wood-whisperer-live-audio/id1276320132?mt=2

Support us on Patreon: https://www.patreon.com/woodwhisperer

The post The Veritas Lie-Nielsen Personality Test appeared first on The Wood Whisperer.

Elevated Dog Bowl – WFC 2019

Woodworkers Fighting Cancer 2019 officially begins with the release of the Elevated Dog Bowl project. You can help support the effort by simply building this project. Send us a picture of your completed project by October 31st 2019 and we will donate $5 to Cancer Research Institute on your behalf. Make a video and we will donate $10!

If you don’t have a dog or don’t want an elevated feeder, you can always build the project and give it away or sell it. Many people build the project and auction it off, then give the proceeds to the charity. It’s up to you.

Download the plans:

Sketchup Plan
PDF/Cut List
Sketchup Plan (Metric)
PDF/Cut List (Metric)

CLICK HERE to submit your photo or video by October 31st 2019

For more information on the charity including our auctions and how to donate directly, head to the main Woodworkers Fighting Cancer page.

The post Elevated Dog Bowl – WFC 2019 appeared first on The Wood Whisperer.