Lahandi Baskoro's Blog, page 6

Gas Fired Organic Heat Carrier Boilers For Sale

In order to meet the industrial production, to cater to the development of the industry situation, Zozen Boilers the current main products are superior in quality, reasonably priced, conform to the requirements of environmental protection standards, get the user consistent high praise. The operating temperature of the organic heat carrier boilers can reach above 250℃ almost under normal pressure, and the production and operation cost is greatly reduced.

 

Organic heat carrier boilers

 

Gas fired heat carrier boiler generally take heat conduction oil as the medium, transfer heat energy to the heating equipment and then return to the heating furnace for reheating. This series of thermal oil boilers can obtain high operating temperature under low pressure and can carry out high precision control of medium operation. This series of boilers have the properties of thermal cracking resistance and chemical oxidation resistance, good heat transfer efficiency, fast heat dissipation and good thermal stability.

The thermal oil medium of the organic heat carrier boilers is relatively stable in chemical properties, and its volume expands significantly after being heated. Overheat causes cracking or condensation, coking or carbon deposition in containers, pipes. When mixed with water or at low boiling point, the steam pressure of this series of boiler products will be significantly increased after being heated. Its flash point, ignition point and spontaneous combustion point are high, in many temperatures and closed state will not ignite. When purchasing the boiler, the user should combine the region and the operating environment of the equipment, it is suggested to choose the heat conduction oil with appropriate low temperature performance.

The thermal stability of gas fired thermal oil boiler is one of the most important properties in operation. The degree of pyrolysis and polymerization varies with the thermal stability. Low boiling of small molecules produced by thermal cracking can easily cause gas resistance in the system and cavitation erosion in the pump. At the same time, it will cause high evaporation loss of oil and environmental pollution. Zozen Boilers in the production of heat conduction oil boiler has excellent thermal stability, reasonable design, reliable.

This series of thermal oil boiler uses good safety heat conduction liquid and adopts flash point and spontaneous combustion point to show its safety. The flash point is used to indicate the safety performance of the heat carrier in the closed circulation system, while the spontaneous combustion point can indicate the spontaneous combustion tendency of the heat conduction liquid in the air when it leaks at high temperature. Suitable viscosity can provide higher circulation efficiency, higher specific heat and thermal conductivity coefficient can transfer or absorb heat effectively, improve fuel economy and operating efficiency.

Gas fired organic heat carrier boiler is widely used in petrochemical, textile, printing and dyeing, plastic, rubber, food processing, wood processing, asphalt heating, carton production, vegetable dehydration, paint baking, casting sand mold drying and so on. It can also be used for baking, steaming, setting, melting and drying ≤ 350℃. The heating surface of this series boiler body is compact in structure. The heating surface is composed of inner and outer discs, the inner coil is the radiation heating surface, and the outer coil and the outer surface of the inner coil constitute the convection heating surface.

 

Gas fired thermal oil boiler

 

The intelligent control of the organic heat carrier boilers makes the operation of the boiler particularly convenient and simple. The controller is shown on the analog screen and centrally controlled by the central processor. It has the functions of automatic ignition and shutdown program control, automatic combustion control, automatic switch and control of circulating pump, automatic fault treatment and alarm, etc. Zozen Boilers specializing in the production of boiler with high quality products, reasonable pricing, quality excellent, the overall design is reasonable. Welcome users to consult purchasing.

The post Gas Fired Organic Heat Carrier Boilers For Sale appeared first on Industry Boiler Manufacturer.

Oil Fired Thermal Fluid Heater In Sri Lanka

The oil thermal oil boiler can obtain higher operating temperature under lower operating pressure. Stable heating and precise temperature are obtained, and thermal efficiency is maintained at optimal levels under all levels of load. Thermal fluid heater in Sri Lanka carries heat in liquid phase, and at 300℃ the heat carrier is 70 times less than the saturated steam pressure of water. It has complete operation control and safety monitoring device. Save electricity, save oil, save water, save consumption, recover investment in 3~6 months.

 

Thermal fluid heater in Sri Lanka

 

This series of thermal oil boilers are widely used in industries such as petrochemical, chemical, plastic, rubber, grease, textile, wood, painting, construction, food, air conditioning, papermaking, paperboard and so on. This series of boilers take heat conduction oil as the heat conduction carrier, can be used as the high temperature heat source under various environments below 350℃, widely used in all kinds of industries that need high temperature heating or drying. This product has the advantages of high temperature, low pressure, accurate temperature control and high efficiency of heat energy.

The thermal fluid heater in Sri Lanka is a new type of thermal conductive oil furnace YY(Q)W series developed by our company. Is my company according to many years of design and manufacturing experience, combined with advanced technology, carefully developed. The oil fired thermal oil boilers and system produced by our company all adopt the advanced structure type, select the original imported burner and PLC full automatic intelligent control system, the operation is safe and reliable, low noise, no pollution, high efficiency and energy saving, easy to install and operate. All the technical indicators meet or exceed the prescribed standards, creating a series of integrated, modular, intelligent high-end products, environmental protection recommended products.

YY(Q)W series organic heat carrier furnace is a quick loading horizontal forced circulation fuel oil heat conduction furnace. This series of industrial boilers are of compact structure. The heating surface is composed of inner, middle and outer (or inner and outer) densely arranged disk tubes. The inner tube is the radiation heating surface. The middle and outer coils are convective heating surfaces. The fuel is burned in a combustion chamber composed of inner coils. After absorbing most of the heat through the radiant heating surface, the high-temperature flue gas enters the convective heating surface for heat transfer. The flue gas after heat exchange is discharged through the flue gas outlet of the furnace body and enters the air preheater for full heat exchange with the air. After heat exchange, the flue gas then enters the condenser for heat exchange with water. Finally, the flue gas temperature drops below 100℃ and is discharged into the atmosphere through the chimney.

The working principle of this series of thermal oil boilers is mainly light oil, combustible gas and other combustible materials as fuel, heat conducting oil as heat carrier, using circulating oil pump to force liquid circulation, transferring heat energy to heat equipment, and then returning to the reheated special type industrial boilers. It has a perfect safety detection device to prevent the occurrence of dangerous operation state of the heat-conducting oil furnace. The whole system and each piece of equipment are easy to maintain and check.

 

YY(Q)W series organic heat carrier furnace

 

Thermal fluid heater in Sri Lanka is practical, economical and safe, providing users with a stable high temperature heat source. Zozen Boilers design of boiler product with the rest of the design margin, the system has high efficiency, with low energy consumption economy is designed, make whole heat conduction oil furnace thermal efficiency is more than 95%. This series boilers has the furnace body structure without damaging the heat carrier and its service life is greatly extended. Welcome to consult purchasing.

The post Oil Fired Thermal Fluid Heater In Sri Lanka appeared first on Industry Boiler Manufacturer.

Biomass Thermal Oil Boiler Characteristics

Biomass thermal oil furnace adopts efficient heat preservation material, the boiler surface temperature is low, heat dissipation loss can be ignored. Strictly in accordance with the specifications and standards of production, all pressure parts are made of high quality boiler steel. Every boiler goes through strict inspection and testing before it goes out of the factory, including hydrostatic test and X-ray inspection. Manhole, inspection door, fire hole, etc., maintenance is very convenient. Thermal oil boiler characteristics by: energy saving, environmental protection, and easy to install and use.

 

Thermal oil boiler characteristics

 

Biomass Thermal Oil Boiler Characteristics


Fuel supply

The fuel of the boiler is BMF fuel, which is fed into the top bin by the feeder, and then into the furnace by the screw feeder, and evenly scattered on the grate.

The combustion process

The fuel is fed into the furnace chamber by the screw feeder, where it is gradually preheated by high-temperature flue gas and primary wind, drying, ignition and combustion, during which a large amount of volatiles are precipitated and the combustion is intense. After the high temperature flue gas scour the main heating surface of the boiler, it enters the economizer and air preheater of the heating surface at the tail of the boiler, and then enters the dust collector and is discharged into the atmosphere through the chimney. Ungasified fuel moves toward the back of the grate until it burns out, leaving a small amount of ash and slag to fall into the slag eliminator behind the grate.

Environmental emissions

The ash produced by combustion accounts for about 1.5% of the fuel. For the convenience of ash discharging, a spiral slag extruder is arranged at the rear of the boiler to realize continuous ash cleaning. The flue at the end of the boiler is arranged with a dust collector to ensure that the smoke emission meets the environmental protection requirements.

Boiler efficiency

The efficiency of biomass thermal oil boilers is generally above 80%, the boiler model is large, the combustion is more sufficient, the efficiency of the boiler is higher. With a high efficiency of 88.3%, it is 15% higher than the average efficiency level of coal-fired boilers. Therefore, the heat-conducting oil furnace burning biomass is the product required by the industry.

 

Biomass thermal oil boiler for sale

 

Compared with the traditional thermal oil boiler, Zozen Boilers manufacturing of biomass thermal oil boilers is a larger space, layout more rational quadratic into the wind, so that more conducive to the biomass particles to a large number of volatile at the moment of combustion, have more burning surface, ensure burning biomass fuel can be burnt out. Adopt high quality combustion device, safe and durable, ignition automation. The feeding, combustion, slag removal, water supply and ignition of the thermal oil furnace can be automatically controlled, and the operation is simple and convenient. The automatic ash cleaning device ensures the slag ash cleaning of the boiler, thus ensuring the efficient and stable operation of the thermal oil boiler. There are energy saving devices at the end of the boiler, and air preheater can also be arranged according to the needs of users.

The Thermal oil boiler characteristics manufactured by our factory has outstanding, adopts efficient thermal insulation materials, low surface temperature of the boiler, high safety factor and low heat dissipation loss. Zozen Boilers produced products in strict accordance with the regulations and standards, for many years, has a mature mastered the professional manufacturing technology, and many customers in the use of after have also expressed the view that Zozen Boilers biomass thermal oil boiler, energy saving, environmental protection, high thermal efficiency, use very convenient.

The post Biomass Thermal Oil Boiler Characteristics appeared first on Industry Boiler Manufacturer.

Oil Fired Thermal Fluid Heater Manufacturing

In order to satisfy the industrial production, cater to the development situation of the whole industry. Zozen Boilers at present main products are fuel oil/gas steam, hot water boiler, heat conduction oil boiler; Biomass steam, hot water, thermal oil boiler; Coal – fired steam, hot water, heat – conducting oil boiler. Thermal fluid heater manufacturing, strong technical force, detection means complete, worthy of customer trust.

 

Thermal fluid heater manufacturing

 

With the development of industry, especially when chemical enterprises produce products, environmental temperature requirements are very high. In this case, people are in urgent need of low cost and can meet the needs of the work of the product, thermal oil boiler is produced in this case. For heat-conducting oil boiler, the operating temperature can reach above 250℃ almost under normal pressure, which has been promoted in the market and greatly reduced the production cost of users.

Thermal fluid heater manufacturing works on the principle of using thermal oil as the medium, using the hot oil circulation pump to force the medium to carry on liquid circulation. The heat is transferred to the heating equipment and then returned to the furnace for reheating. This series of boilers have the characteristic of low pressure and high temperature, and can carry on the high precision control work to the medium operation.

The oil fired thermal oil boilers is resistant to thermal cracking and chemical oxidation. Good heat transfer efficiency, fast heat dissipation, good thermal stability. As is known to all, thermal oil belongs to the lubricant series of petroleum products, and its chemical properties are relatively stable, and it is not as easy to ignite as light oil. When it is heated, its volume expands significantly, and its expansion rate is much higher than that of water. The boilers in this series crack or condense when overheated, and coke or

When thermal oil is mixed with water or low boiling point group, steam pressure will increase significantly after being heated. Its flash point, ignition point and spontaneous combustion point are high, in many temperatures and closed state will not ignite. Thermal stability is an important performance of this series of thermal oil boiler. The degree of pyrolysis and polymerization varies with the thermal stability. Therefore, the excellent thermal stability of the product is particularly important.

According to the thermal oil outlet temperature and system load requirements, the burner automatically adjusts the amount of fire, and observe the thermal oil temperature and pressure at any time during operation. If the heat conduction oil temperature cannot meet the requirements, the control system setting parameters need to be adjusted. During operation, it is necessary to specify the main regulation mode of temperature, pressure, liquid level and combustion control indexes after the thermal oil enters into normal operation. Pressure gauge, thermometer, liquid level meter in the operation of inspection management, sewage, exhaust steam, slag, etc.

 

Oil fired thermal fluid heaters

 

The thermal fluid heater manufacturing is easy to and adjust, the heat supply is even, it can meet the precise process temperature. Using liquid phase circulation heating, no condensing discharge heat loss, heating system high thermal efficiency. Zozen Boilers products specializing in the production of high quality boiler, rich production experience, strong technical force, high degree of automation, wide application range. Welcome to the majority of users to consult procurement, we will serve you wholeheartedly.

The post Oil Fired Thermal Fluid Heater Manufacturing appeared first on Industry Boiler Manufacturer.

DZL Series Biomass Hot Water Boilers Supply

DZL series biomass hot water boiler is a pressurized hot water boiler with chain grate, and the whole boiler is a three-way water and fire tube boiler. Biomass boilers supply on the left and right sides of the convection heating surface, the boiler barrel internal thread smoke pipe, effectively improve the efficiency of the boiler. This series boiler furnace interior arrangement water cooling wall and the low but long rear arch and the front arch match. The use of chain grate, equipped with independent air barn, blower, induced draft fan, slag eliminator to achieve mechanized operation.

 

Biomass boilers supply

 

The biomass fired boiler fuel falls on the grate from the coal scuttle and burns gradually as the grate moves. Under the combination of the front and rear arches, the flame forms a fierce combustion swirl. The flue gas enters into the convective tube bundle from the upper combustion chamber of the rear arch, passes through the convective heating surface, and the front smoke box enters into the threaded pipe. After passing through the dust collector, the induced draft fan is finally discharged into the atmosphere through the chimney.

Biomass boilers supply using new technology, new process, high boiler thermal efficiency. The whole structure is compact, covers an area of small, cost is low. Fast installation out of the factory, easy to install and move, effectively save capital investment. This series of boilers have good fuel adaptability and good smoke and dust removal effect. Reasonable arrangement of heating surface and combustion equipment, boiler heat efficiency ratio is high. Biomass hot water boiler closed ash, to avoid secondary pollution, can save time and effort.

This series of hot water boiler has the reasonable smoke speed design, the thread smoke tube does not accumulate ash, does not wear out, the boiler heating surface in the condition of not blowing ash, can keep the high efficiency, full load, safe operation for a long time. High furnace is easy to design reasonable furnace arch according to different fuel, improve the burning degree of fuel and eliminate black smoke. The design of all independent circuits and the use of a reasonable ejection cycle, heating surface circuit in the medium high flow rate is far higher than the standard requirements.

DZL series hot water boiler adopts chain grate, less coal leakage, convenient combustion adjustment. The smoke at the exit of the furnace is separated by inertia, which can effectively reduce the dust concentration of exhaust smoke and reduce the wear on the rear heating surface. Compact structure, the installation height can be reduced by 3~5m compared with other types of boilers of the same capacity, shorten the installation period and reduce the cost of boiler room. The boiler water volume is large, each loop drop section ratio is large, conducive to power failure protection, adapt to the load change ability is strong.

 

Biomass hot water boiler sales

 

Zozen Boilers is specialized in producing all kinds of boiler products, models complete, the variety. Biomass boilers supply with enhanced heat transfer, enhanced combustion, high heat intensity per unit heating surface. Boiler operation should be done in accordance with the relevant provisions of water quality management, to prevent boiler parts due to scale, water slag, corrosion and damage or accidents.

The post DZL Series Biomass Hot Water Boilers Supply appeared first on Industry Boiler Manufacturer.

High Quality Molten Salt Heater Manufacturing

In the design of melting salt furnace, the adaptability of heating furnace to fuel is taken into full consideration to ensure the output and thermal efficiency of melting salt furnace. The heating surface of boiler body is designed with integral structure. The Molten salt heater manufacturing body of is composed of radiation heating surface and convection heating surface. And the radiation heating surface and convection heating surface are composed of advanced multi-coil parallel structure. In the design and manufacture of molten salt furnace, strictly comply with the requirements of the relevant standards. Molten salt heaters carbon execution according to the standard, nitrogen oxide emissions in line with the European EN676 standard CALSS Ⅲ level standard, noise, pollutant discharge meet the environmental requirements.

 

Molten salt heater manufacturing

 

In order to ensure the reliability of the system, this series of thermal oil boiler adopts an integrated burner. The selected burner has mature technology, strong adaptability, excellent performance, stability and reliability. It can maintain a stable combustion state even under partial load. The burner is easy to disassemble and maintain, and easy to purchase and replace parts. It has many functions such as air purge, ignition, flameout, too low fuel pressure, too high protection, fuel quantity and combustion-supporting air flow ratio adjustment, and safety interlock protection.

Molten salt heater manufacturing provides burner automatic control system and connection. Including pressure regulating, pressure regulating, filter, emergency shut-off valve, pressure indicator and double solenoid valve. The incoming gas pressure of fuel gas shall be regulated by the manufacturer and shall be responsible for regulating the gas pressure to the pressure range required for the normal operation of the burner. To prevent gas leakage, two levels of protection should be set up and a reliable leak detection system should be installed. The fan system shall provide combustion-supporting air for the burner, and carry out a forward purge before the furnace and a back purge after the furnace is shut down to thoroughly remove combustible gases in the furnace.

This series of industrial boiler burners adopt proportional regulation, through the control cabinet to complete the regulation of heat medium outlet temperature, gas flow, combustion-supporting air volume. The burner has the functions of gas leak detection, ignition, flame monitoring, flame-out protection, inlet pressure protection, wind pressure protection, load adjustment and so on, and is automatically controlled. The salt bath must be set up in the whole salt melting system to store and melt salt, participate in the main circulation of the system, and play an important role in regulating boiler load.

 

Molten salt heaters supplier

 

The molten salt heater manufacturing furnace body is composed of heating coil and shell for integral heat treatment. The boiler is qualified for overall acceptance, ready for delivery, easy to install, debug and use. The results are in conformity with the design drawings and relevant standards. Zozen Boilers furnace heat preservation performance is strong, high quality thermal insulation material, external use stainless steel maximum limit reduces the heat loss, improve the operating environment. Manholes and inspection doors are set at the bottom for maintenance, inventory and cleaning.

The post High Quality Molten Salt Heater Manufacturing appeared first on Industry Boiler Manufacturer.

Biomass Fired Thermal Oil Boilers For Sale

The radiation heat exchanger section of main engine of biomass fired thermal oil boiler adopts tubular frame structure and double dense row coil structure. The biomass fired boiler sales convective heat transfer section using a serpentine tube multi – return heat transfer. The steam generator, air preheater and other energy saving waste heat recovery devices are arranged in the tail.

 

Biomass fired boiler sales

 

This series of thermal oil boiler is a forced circulation chain grate boiler, which can be divided into two parts, the upper heating surface body and the lower combustion equipment, which are assembled at the construction site. Connect the parts and you can use them. Convenient installation, long service life, in line with the requirements of energy conservation and environmental protection. The combustion chamber of chain grate is increased, secondary air is arranged to support combustion, fuel combustion is uniform and sufficient, and combustion efficiency is high.

The biomass fired boiler sales feeding device adopts the material locking structure, which can effectively prevent the flame tempering to burn the hopper. The boiler air blowing, air drawing, feeding device and speed regulating box adopt frequency conversion device, which can automatically adjust the speed of the grate and the speed of feeding according to the height of the oil output temperature during operation.

Biomass thermal oil boiler furnace arch adopts special design, different specifications of the boiler grate adopts air bin inlet air, independent regulation of air volume, wide adaptability to combustion. Grate can also be used according to different biomass fuels to effectively alleviate the possibility of furnace coking. This series of boilers can obtain high operating temperature under low operating pressure and have the characteristics of low pressure and high temperature.

Biomass organic heat carrier boiler can achieve stable heating and accurate temperature regulation, improve the quality of heating products. Perfect operation control and safety testing device, easy to operate, safe and reliable. Adopt closed circuit circulation, liquid phase transport heat energy, heat loss is small, energy-saving effect is remarkable, environmental protection effect is good. It can also be equipped with water pipe waste heat steam boiler and steam generator, realizing one furnace and two uses, energy saving and environmental protection.

 

Biomass fired thermal oil boiler priced

 

Organic heat carrier boiler using the Biomass as fuel, Heat conduction oil as heat carrier, using the circulating pump, forced heat conduction oil for liquid circulation, after transfer heat to heat equipment, it can send them back to the reheating furnace. Various types of emissions are below the standard, it can replace the electric boiler, fuel oil boiler, gas boiler. Biomass fired boiler sales can save more cost of you, it can save more than 40% – 60% cost of the electric boiler, fuel oil boiler and gas boiler. Organic heat carrier boiler using the Biomass as fuel, save 5%-10% running cost than coal, the heat energy is a kind of high efficiency and energy saving environmental protection equipment.

The post Biomass Fired Thermal Oil Boilers For Sale appeared first on Industry Boiler Manufacturer.

Industrial Oil Fired Steam Boiler System

WNS series oil-fired steam boiler is a wet-back micro positive pressure combustion three-return structure. The industrial oil fired boiler adopts the wet-back structure to avoid the damage caused by the direct scouring of the smoke box by the high temperature smoke. Thus the normal operation cycle of the boiler is prolonged and the maintenance cost is greatly reduced. The boiler passes through the heat exchange between the corrugated furnace bile and the first return smoke pipe, and the smoke temperature is already low when it reaches the front smoke box, which makes the front smoke box door manufacturing simple.

 

Industrial oil fired boiler

 

This series of oil-fired boilers have the highest reliable performance in both combustion process and boiler structure and operation. The heating surface needs to be set at the end of oil-fired steam boiler, and the WNS series boilers produced by our factory are all equipped with energy saving devices at the end. Because the boiler uses pipe fittings as the main heating surface, the water quality of the boiler must fully comply with the relevant standards and requirements.

The heating surface is added at the end of the industrial oil fired boiler, which improves the boiler’s thermal efficiency, low fuel consumption and low smoke exhaust temperature. Boiler products energy – saving environmental protection, steam production fast. This series of steam boilers run automatically, easy to operate, low labor intensity, the controller adopts safety interlock device, safety performance is reliable. The fuel uses clean fuel and soot emission meets environmental protection requirements. The boiler is equipped with high quality combustion machine, with low failure rate, low noise, small electrical power, energy-saving and low maintenance rate.

Oil – fired steam boiler is widely used to ensure the safety and economic operation of the boiler. The operation of oil-fired boilers must be carried out in strict accordance with boiler safety supervision and energy conservation supervision standards. The combustion chamber and heating surface of this series of boilers adopt the low design of the combustion chamber and the symmetrical arrangement of the heating surface, which is beneficial to bury the combustion chamber with the highest temperature in water and increase the safe range of boiler water level.

WNS series steam boiler control system uses programmable logic controller as the central control, a variety of types of operation interface for users to choose. The main functions of this series boiler control system include: automatic water supply control, automatic combustion regulation, automatic oil temperature control, air pressure protection, program control, automatic ignition, furnace stop and other safety protection, etc.

 

Industrial oil steam boiler

 

The industrial oil fired boiler is complete, and the whole set of equipment consists of boiler body, burner, intelligent control device, valve instrument and so on. At the same time also equipped with high – performance feed water pump. The diameter and length of the furnace tube are consistent with the size of the burner torch, and the combustion is completely full. Strong burner output power to ensure boiler output. Overall design is reasonable, the operation is stable and reliable, the price is competitive, welcome Zozen Boilers advisory procurement.

The post Industrial Oil Fired Steam Boiler System appeared first on Industry Boiler Manufacturer.

Industrial Biomass Steam Boilers For Sale

As we all know, biomass fuel is a new kind of renewable green energy, which can be sustainable development of environmental protection fuel. Industrial biomass steam boilers as a new type of energy boiler, has been promoted in the market. From the utility can be divided into power boiler, industrial boiler, domestic boiler and so on. Common biomass boilers are horizontal water-fire tube steam boiler, hot water boiler, heat-conducting oil boiler and circulating fluidized bed boiler.

 

Industrial biomass steam boilers

 

Biomass fired boiler fuel has the basic characteristics of high volatility, low ignition point. The boiler has large space and reasonable secondary air, which is conducive to the full combustion of biomass fuel. In this way, the flue gas can stay in the furnace for a long time, avoid the fine carbon particles being taken out of the furnace, and ensure that the fuel is fully burnt in the furnace. Biomass fired steam boiler has prominent advantages, with automatic feed, slag, blower frequency regulation, automatic boiler operation and other advantages. Also can automatically adjust the amount of fuel according to the load changes, steam output is stable, with pressure, water level, smoke exhaust temperature and other protection and alarm measures to ensure the safe operation of the boiler.

Industrial biomass steam boilers technology features remarkable, suitable for iron and steel, metallurgy, petrochemical, textile, printing and dyeing, medicine, food, paper, rubber, plastic and other enterprises; Hotels, hospitals, schools, bath centers and other places. The whole adopts horizontal three-return design, full wet back structure, corrugated furnace bile and threaded smoke pipe matching design, full pair welding structure, front and rear smoke box are adopted double sealing structure.

This series of industrial boilers are equipped with energy saving devices, which are placed on the rear smoke box, with compact structure and small floor space. Explosion-proof door is installed at the outlet of the furnace, automatic intelligent control, should have a wide range. The overall combustion system is composed of burners, fans, igniters and other components, with reasonable design, high efficiency, simple operation and convenient installation. This series of steam boilers have stable operation, convenient adjustment, sufficient output, small shape and size, saving investment in boiler house construction.

The biomass steam boiler adopts the high-efficiency heat transfer threaded pipe, which enhances the heat transfer effect, achieves the boiler temperature rise, the pressure rise fast characteristic, effectively improves the boiler thermal efficiency. The heat transfer coefficient and thermal efficiency of the threaded pipe are enhanced because of the disturbance of the flue gas in the pipe. Smoke tube is not easy to accumulate ash, can play from the role of cleaning. This type of boiler adopts chain grate, mechanical feeding, uniform feeding, stable combustion, convenient control, with the advantages of not tempering, mechanical ash cleaning and so on.

 

Industrial biomass fired boilers

 

Secondary air is arranged in front and rear arch of industrial biomass steam boilers to ensure secondary combustion of fly ash after particle decomposition with high combustion efficiency. The simulated controlled combustion can be realized without deflagration. The ignition speed of combustion can be controlled by adjusting the secondary air volume of the control speed. Zozen Boilers products, specializing in the production of various types of boilers is committed to serve the masses of users to provide quality boiler, welcome everyone to come to advisory procurement.

The post Industrial Biomass Steam Boilers For Sale appeared first on Industry Boiler Manufacturer.

Natural Gas Steam Boiler Efficiency

Natural gas steam boiler is a kind of gas boiler, natural gas steam boiler is mostly used in the industrial production of factories, such as: food, chemical, packaging, medicine, building materials, clothing, textile, rubber and other industries. Natural gas boiler manufacturing is divided into two types: horizontal three-return structure and condensing structure. Below we will introduce the following two structures respectively, hope to be helpful to you.

 

Natural gas boiler manufacturing

 

The gas fired boiler is equipped with horizontal three – return wet – back structure, corrugated furnace and threaded smoke pipe technology, equipped with high quality burner and auxiliary parts. Plus I plant independent research and development of high matching PLC control system, intelligent matching, rich functions. It also uses the Internet of Things to monitor the operation of devices remotely. Equipped with boiler operation data query and automatic fault identification function, it can realize multi-interlock protection functions such as shut off protection and power off protection. Natural gas horizontal three-return boiler has complete protection functions, which can realize automatic control of boiler water level, safe operation of all-round protection equipment such as high and low water level and overpressure alarm. The NOx emission of natural gas boiler is small and meets the requirements of energy conservation and environmental protection.

The natural gas boiler manufacturing adopts the integrated design of body, energy saver and condenser, and the use of heat energy step. Low exhaust temperature and high thermal efficiency. This series of steam boiler energy saving device, condenser built-in countercurrent arrangement, enhance the heat transfer effect. Compared with the ordinary boiler, this series of gas boiler flue gas vapor cold condensation process, can be the flue gas NOx and other harmful substances with the condensed water discharge, achieve energy conservation and emission reduction.

This series of natural gas boilers combine ultra-low nitrogen combustion technology with WNS boiler manufacturing technology, and achieve key breakthroughs in the two core technologies of fractional combustion and FGR flue gas recycling, thus developing a classic horizontal internal combustion low nitrogen boiler with low NOX emission, which meets and exceeds the environmental protection requirements. Widely used in chemical industry, food industry, building materials industry, paper factory, packaging factory, clothing textile factory, printing and dyeing factory, hospital, school, hotel, government offices, greenhouses, cannery, winery, coating factory, swimming pool, water washing factory, etc.

After the fuel of industrial gas-fired boiler is ejected and atomized by the burner, it is burned in the micro-positive pressure in the corrugated furnace chamber, and the high-temperature flue gas moves along the corrugated furnace chamber to the back-combustion chamber. Then turn back and wash the heating surface of the threaded pipe to reach the front smoke box after convection heat transfer. After the energy saving device, the flue gas convection heat transfer in the flue gas condenser is discharged into the atmosphere through the chimney. The water supply of this series boiler shall be softened, the soft water shall be injected into the cold water tank, the cold water shall be injected into the flue gas condenser by the water pump, and the cold water shall flow into the hot water tank after full heat exchange with the flue gas, and the soft water in the hot water tank shall be filtered and driven into the energy saver through the water pump, and then directly into the boiler after full heat exchange.

 

Natural gas steam boiler sales

 

The natural gas boiler manufacturing operation is stable with zero failure rate. It is safe, efficient, intelligent and environmentally friendly. Adopting high quality burner and advanced combustion technology, it has long service life, good energy-saving effect, effective saving operation cost, saving fuel and meeting environmental protection requirements. Zozen Boilers production experience, strong technical force, run the security and stability, in good condition. It can be shown according to the actual data from the user operation site that it has low energy consumption, high thermal efficiency and can operate over load. NOx emission is in line with environmental protection standards.

The post Natural Gas Steam Boiler Efficiency appeared first on Industry Boiler Manufacturer.