Lahandi Baskoro's Blog, page 3

Oil Fired Industrial Steam Boiler Manufacturer

After the fuel oil of oil fired steam boiler is injected into the furnace by the burner, it shows the form of mist oil droplets, which are easy to be mixed with air and burn quickly and release heat in a sudden. Oil fired industrial boiler compared with coal-fired boilers of the same parameters and capacity, the thermal strength of the furnace volume can be increased by about one time. In order to reduce the heat load of the burner area and avoid the overtemperature of the water-wall tube in this area, the volume of the furnace is only reduced by about 1/3. And because the ash content in fuel oil is very little, will not be in the convection heating surface on the slag, so can make the furnace outlet smoke temperature as high as 1300 ~ 1350℃, and reduce the convection heating surface between the tube pitch to improve the flow rate of flue gas, thus can improve the heat transfer coefficient of the heating surface, save the heating area and steel.

 

Oil fired industrial boiler

 

This series of oil fired boilers in order to prevent spontaneous combustion of carbon black oil deposits on economizer and air preheater, steam ash blowers should be installed on these parts to keep the heating surface clean. At the same time, because fuel oil does not cinder, it can be made into a micro-positive pressure boiler with membrane water wall. It can dispense with the induced draft fan and exhaust the flue gas out with only the fan. If the overall shell of the boiler is made of thick steel plate, it can also be made into a positive pressure boiler, which can make the overall structure of the boiler more compact, and is mostly used in the combined gas-steam cycle generator set.

This series of steam boilers of fuel is the fuel, such as diesel oil, light oil, heavy oil, etc.), depends on what kind of fuel boiler combustion equipment is called burner, the configuration of gas burners of boiler gas boiler, configuration of fuel oil burner boiler is called oil burning boiler, what is to use the difference between oil burning boiler and gas boiler burner combustion of fossil fuels. The flame of oil fired industrial boiler burns in a large combustion chamber under micro-positive pressure, with full extension, low burning thermal load and high burning thermal efficiency. It can effectively reduce the smoke exhaust temperature, save energy and reduce consumption, use more economical, using corrugated furnace and threaded smoke tube structure, that is, to improve the heat absorption intensity of the boiler, and meet the heat exchange surface heat expansion needs, scientific and reasonable, durable.

Industrial oil fired steam boiler have large space, large storage capacity and strong capacity to adapt to load. The design of a reasonable built-in steam separator device, to meet the users need higher quality steam requirements. The furnace body has manhole, head hole and hand hole, which is convenient to clean the inside of the furnace and make maintenance and maintenance very convenient. Boiler is equipped with multiple safety interlocks protection: pressure switch protection (higher than the set pressure automatic stop and alarm), low water level protection (boiler water level of the body below the warning level, automatically cut off power and alarm), safety valve protection (boiler pressure more than work pressure, automatic discouraged step-down), ensure the boiler under various working conditions is quite safe, arrived back home safe and sound.

 

Oil fired steam boilers

 

Oil fired industrial boiler burners are supplied by the world famous manufacturers. They automatically burn and stop according to the command of the controller. The independent program controller has a number of safety protection, safe and stable performance, low maintenance rate. The oil-fired steam boiler has large combustion space, makes full use of radiation heat transfer, and has high quality and reliable imported burners, so that the fuel can be completely burned, greatly reducing the emission of harmful components in the flue gas. Testing by the legal department, Zozen Boilers production of fuel steam boiler conforms to the requirements of environmental protection, is the ideal environmental protection product. Welcome to consult procurement, we will provide you with quality boiler solutions.

The post Oil Fired Industrial Steam Boiler Manufacturer appeared first on Industry Boiler Manufacturer.

Industrial Coal Fired Hot Water Boiler For Sale

Coal fired hot water boilers with “two-wing flue technology” as the core, DZL two-wing flue fast-loading chain fire tube grate boiler has successfully solved the two major technical problems that have existed for many years, namely, the bottom of the pot is easy to bulge and the tube plate in high temperature area is easy to crack. It is an epoch-making technological innovation, and has become the benchmark of the new generation of quick-installed chain grate boiler with water and fire pipes. Up to now, the industrial hot water boiler manufacturers are produced by this technology, because of its mature technology, superior performance, users have been unanimous praise.

 

Industrial hot water boiler

 

DZL series hot water boiler is mainly composed of the upper body and the lower base. The large parts of the boiler have been assembled in the factory. After the large parts of the boiler (mainly the upper body and the lower base) are in place, it only needs to complete the interfaces, auxiliary machines and piping system to run. DZL series boilers adopts light chain grate, high degree of automation, equipped with dust removal equipment, less environmental pollution, has a good comprehensive economic and technical indicators, well received by the majority of consumers.

Industrial coal fired boilers are widely used in building materials industry, feed industry, rubber factory, textile factory, food factory, beverage factory, dairy factory, canning factory, chemical fibre factory, water washing factory and so on. The industrial hot water boiler has low original dust discharge concentration, high efficiency, energy saving and enhanced combustion technology, and is designed with a large volume furnace and a burning chamber. The power output of the boiler is sufficient and the middle partition structure is adopted, which is conducive to fly ash to burn up, increase the stroke of flue gas and increase the heat transfer of the combustion chamber. DZL series boilers are equipped with characteristic layout, fresh energy efficiency, advanced threaded pipe structure, high heat transfer coefficient, small heat loss, efficiency is far higher than similar products.

This series of coal fired boilers have been continuously updated and improved to overcome the bulge problem. The rising tubes on both sides of the collector boxes are pulled towards the furnace chamber, and the novel furnace structure avoids the “bulge” defect. DZL series hot water boiler can heat up quickly, a large number of efficient heat transfer threaded pipe in the boiler shell, heating time is about 1/3 shorter than water tube boiler. The tube plate is reliable and durable. The arch tube plate and baffle plate will improve the water circulation here and make the front tube plate fully cooled. Boiler room investment is low, in the same capacity of the minimum size of the furnace, the boiler room investment at least reduced by 1/3 and suitable for the old boiler room reconstruction capacity expansion. Blackout self-protection, natural circulation makes the water wall does not vaporize, without the use of special protection measures can prevent damage accidents.

When the coal fired hot water boiler is running, the fuel is fully burned in the furnace chamber, and the flame enters the back of the body through the flue gas passage of the intermediate furnace wall, and turns to the front smoke box through the combustion chambers on both sides. Then the front smoke box is retraced back to the internal tube bundle of the boiler, through the rear smoke box into the dust collector, and finally by the induced draft fan through the flue to the chimney exhaust to the atmosphere. This series of coal-fired boilers can be installed in factory by quick loading. After arriving at the site of use, they can be installed and connected with valve instruments, blower, induced draft fan, smoke air pipe, dust collector and water and electricity road, etc. It has the characteristics of fast starting fire, etc.

 

Coal fired hot water boiler

 

Industrial hot water boiler has stable operation, convenient adjustment, full output, quick pressure boost, environmental protection, energy saving and high thermal efficiency. The boiler itself has the effect of dust removal, so that the smoke and dust discharge of the boiler can meet the environmental protection standards. Zozen Boilers with one-stop service system. For users to implement a one-stop service: free for users to conduct boiler room design consulting services; Provide the boiler room layout plan for users’ reference free of charge; In addition to supply, transportation, but also to provide users with quality installation services; To provide customers with preferential spare parts. Welcome to our factory to consult and purchase, we will serve you wholeheartedly.

The post Industrial Coal Fired Hot Water Boiler For Sale appeared first on Industry Boiler Manufacturer.

High Quality Gas Steam Boilers Manufacturing

WNS series steam boiler is a kind of automatic horizontal internal combustion gas boiler. The gas steam boilers manufacturing body of is made of wet-back structure, corrugated furnace tube and return combustion chamber, and threaded smoke pipe. Energy saving device and condenser are placed on the top of boiler, which are widely used in various industrial industries, such as textile, chemical, paper, machinery, food, agricultural products processing industry, etc. This series of boilers are highly efficient and energy-saving. The heat exchange area of the economizer and condenser is large, and the condensation rate of water vapor in the flue gas is high, which can fully absorb the heat released by the condensation of water vapor in the flue gas, and the thermal efficiency can be as high as 98%.

 

Gas steam boilers manufacturing

 

The design of this series of gas fired boilers adopts the convective heating surface of threaded pipe, which can effectively improve the heat transfer efficiency of the boiler. Part of CO2, NOX, SO2 and other harmful components in the flue gas are dissolved in condensed water, effectively reducing the discharge of atmospheric pollutants. At the same time, the use of large size furnace structure and flue gas recycling technology, for the gas-fired boiler, can completely achieve ultra-low nitrogen emissions, low NOX emissions, fully meet the increasingly stringent environmental requirements. Energy saving device, condenser and boiler are arranged as one, quick installation, easy installation, compact structure, beautiful and generous. Less floor space, less investment in infrastructure.

The industrial gas steam boiler is equipped with energy saving device, spiral finned tube of condenser and ND steel material resistant to sulfuric acid corrosion, which greatly improves the service life of the equipment. The gas steam boilers manufacturing have combination of intelligent combustion control and automatic safety interlocking protection system ensures economic, environmental and safe operation. In the heat loss of flue gas steam boiler, besides sensible heat of flue gas, steam also takes a lot of latent heat of vaporization. If the steam in the flue gas is fully or partially condensed by lowering the exhaust temperature, and the latent heat released during the condensation process is recovered and utilized, the effective utilization heat of the boiler is increased, and the thermal efficiency of the boiler will be significantly improved.

WNS series gas fired boilers aim at the key technical factors such as the relationship between condensation rate of water vapor in flue gas and exhaust temperature, the relationship between condensation rate and thermal efficiency, and the corrosion rate of condensed water to different types of steel. Through the reasonable design of heating surface, reduce the exhaust temperature, ensure the water vapor in the flue gas to meet the design requirements of condensation rate, so that the boiler thermal efficiency greatly improved. As the gas fired steam boiler adopts the large-size furnace structure and the flue gas recycling technology, it can realize ultra-low nitrogen emission for the gas-fired boiler.

 

Gas fired boilers for sale

 

Gas steam boilers manufacturing with its excellent, safe quality, excellent performance, considerate service, favored by users. Zozen Boilers products are exported to Mongolia, Korea, kazakhstan, Indonesia, Vietnam, Laos, and Cuba, etc. More than 100 countries and regions, superior product quality, stable and reliable operation, use safety guarantee, users have to endorsed and good evaluation. Welcome to consult procurement, we will provide you with high quality boiler solutions services.

The post High Quality Gas Steam Boilers Manufacturing appeared first on Industry Boiler Manufacturer.

Professional Oil Fired Industrial Boilers Manufacturer

WNS series oil fired boiler is horizontal quick – mounted internal – fired three – return – trip fire tube boiler. The bifurcated flue gas is used to wash the second and third return flue gas pipes successively, and then the flue gas chamber is discharged into the atmosphere through the chimney. The boiler is fitted with movable front and rear smoke box covers to facilitate boiler maintenance. The oil fired industrial boilers is widely used in hot spring bath, sauna room, printing and dyeing room, factory office school, pharmacy, hotel catering, food processing, chemical plant, sock factory heat setting, clothing processing, industrial steam washing, heating drying farm, etc.

 

Oil fired industrial boilers

 

Horizontal oil fired boilers are equipped with industrial burners with good technical performance, adopting advanced technologies such as automatic proportional combustion regulation, automatic feed water regulation, program start and stop, automatic operation, etc., and have automatic protection functions such as high and low water level alarm, extremely low water level, ultra-high steam pressure and flameout. The boiler heat is sufficient, the heating area of the boiler is designed in accordance with the high standard configuration, fully absorb useful heat, heat loss is small, smoke exhaust temperature is low, ensure full output, high power.

High level of automatic control, boiler controller using Siemens or Delixi electrical components, reliable performance. There are three kinds of controllers: ordinary type, English menu type with liquid crystal display and touch screen type with man-machine dialogue remote control. Oil fired industrial boilers adopt large diameter corrugated furnace, large combustion space, complete fuel combustion, effective absorption of heat expansion, large radiation heating surface.

The rear panel of this series industrial boiler is equipped with explosion-proof equipment connected with the furnace, which can avoid the high energy generated at the moment of discharge when the fuel exploders violently in the furnace, and can automatically reset. Meanwhile, it has the function of fire-viewing mirror and maintenance channel. It is convenient to overhaul and maintain the furnace by using the adjustment of burning flame during operation. High quality steam: pot shell diameter, water capacity, the load of the habit of strong capacity, stable output; The steam space volume is large, the net distance between the soda interface and the steam outlet is high enough, and the steam humidity is low.

The combustion chamber of the horizontal oil fired boiler adopts the low position, the water level is confirmed in accordance with the regulations, and at the same time, in strict accordance with the requirements of the international general norms of water level fluctuation time, there is enough safe precipitation space, to ensure the safe operation of the boiler. Reliable maintenance of pressure and water level: Multiple controlled maintenance of boiler pressure and water level Settings, as well as maintenance of ultra-smoky temperature ensure the safety of boiler operation. This series of boilers are convenient for maintenance, with manholes on the top, and unique manhole equipment in the front and rear ends, middle and lower parts of the boiler, so as to facilitate the repair and arrangement of the equipment inside the boiler and the boiler bottom.

 

Industrial oil fired boiler priced

 

The smoke box of oil fired industrial boilers adopts double-open smoke box door, which is convenient to open, multi-level labyrinth seal, the sealing material is specially made, and has good compressibility. It can completely prevent the leakage of flue gas and can be reused. Zozen Boilers is a company specializing in boiler manufacturers, production being series boiler using the organic combination of the electromechanical integration appearance, exquisite novel, compact structure, small occupation space, easy to transport and install. Welcome to consult purchasing, we will serve you wholeheartedly.

The post Professional Oil Fired Industrial Boilers Manufacturer appeared first on Industry Boiler Manufacturer.

Coal Fired Steam Boilers DHL Series Priced

The cylinder body of DHL series coal fired boiler is welded by steel coils, and the head is stamped by the same kind of steel plates. Both ends of the drum are provided with manholes for inspection. In order to prevent the direct contact between the low temperature water supply and the high temperature wall of the pot, the tube is provided with a bushing structure. The center line of the normal water level of the boiler barrel is at the center line. The drum is equipped with two high reading water level meters, an electric contact water level meter and a balance container for automatic water level control. DHL series boilers priced are reasonably, in order to improve the quality of steam and reduce the salt concentration of furnace water. The boiler barrel is equipped with a continuous sewage pipe and a dosing pipe for the treatment of water in the furnace, with a continuous sewage rate of 2%.

 

DHL series boilers priced

 

This series of coal fired steam boiler drum with clapboard, inside the drum can be divided into two halves, introduced by the back of the drum drum water supply, the water distribution tube evenly on both sides of the water in the drum to the large-diameter down pipe, boiler water after each heating surface heating the mixture of soda into the heating surface outlet header (territories), here, the water vapor is preliminary separation, steam the out pipe is introduced into trachea, located in the steam drum upper space set on either side of the pot were introduced in the boiler water wall used to box, part of the boiler water back into the drum, to participate in the next round of cycle, The other part flows into two downcomer pipes located at the rear of the boiler and is assigned to lower header boxes on each heating surface. The separated steam is introduced from the back of the pot through the steam collector, and moves inside the pot on both sides. The steam is deflected into the front half of the pot at both ends of the pot. After further separation by the corrugated plate separator located on the upper part of the pot, the steam is extracted from the steam pipe located in the middle of the pot.

DHL series boilers priced are reasonably, run smoothly and reasonably, and have adjustable capacity. They are the latest substitutes for high-capacity hot water boilers. This series of coal fired boilers have a wide range of applications, which can be used as the main heat source of central heating in cities and industrial and mining enterprises, and can also be used as the peak boiler in thermal power plants to regulate the operation of urban heat network, and also meet the demand of industrial and mining enterprises for a large number of process hot water. Belongs to the natural circulation boiler, widely used in pharmaceutical, chemical, food, paper industry, welcome to consult.

This series of coal fired boilers adopt advanced product design and invention patent, based on the high temperature separation of fly ash internal circulation vulcanization reignition device and corner tube boiler flag type convection heating surface compound velocity design method. DHL series steam boiler adopts beam type grate, and the grate has low running resistance; Good cooling effect, low failure rate; The amount of “fuel” leaking from the grate is small. Combustion system manufacturing for professional production. The boiler adopts the design idea of turbulent combustion in secondary air and the technique of fluidized recombustion in internal circulation of fly ash separated by high temperature. The boiler body is a light furnace wall structure, good heat preservation performance, no ash leakage, excellent environment. The boiler can be designed according to different kinds of coal.

 

DHL series coal fired boiler

 

DHL series coal fired boiler has wide adaptability, can use bituminous coal, lean coal, anthracite and so on. I can also according to your specific needs, for you to customize the feeding system, slag system, tail gas treatment system, boiler room layout plan. DHL series boilers priced are reasonably, highly automated, require less operation and maintenance. Adopt advanced control system, let you run and use safely. Zozen Boilers sincerely welcome the broad masses of users to advisory procurement.

The post Coal Fired Steam Boilers DHL Series Priced appeared first on Industry Boiler Manufacturer.

SZL Series Coal Fired Steam Boiler Sales

SZL series coal fired steam boiler is designed by our technicians according to advanced technology and experience. It is a horizontal double-pot tube longitudinal layout chain grate steam boiler. SZL series boiler sales absorb the advantages of quick installation boiler, compact structure, single layer boiler room layout, convenient site installation, short cycle, low cost, simple operation and other advantages. This series of steam boilers are suitable for industrial and domestic steam, and hot water boilers of corresponding capacity are suitable for industrial and civil heating. This series of products technology, performance, environmental protection indicators have reached the international advanced level, for the boiler industry leading products.

 

SZL series boiler sales

 

The coal fired steam boiler adopts quick – mount or assembly structure. 4 ~ 6t/h is the structure of quick-loading water pipe, which leaves the factory after being fully assembled in the factory; 6 ~ 25t/h is composed of the upper and lower parts, the upper part is the body heating surface, and the lower part is the combustion equipment. Around the front end of the series of coal-fired boiler arrangement of water-cooled wall connected to the drum bottom connected to the header of the combustion chamber, to absorb the furnace radiant heat, backend layout between water drum on intensive convection tube bundle, high temperature flue gas after combustion after secondary return lateral erosion convection heating surface to separate arrangement of economizer, finally into the filter through the chimneys. 20T /h assembled water-tube boiler is composed of front furnace, rear furnace, convection tube bundle, economizer and chain grate, which are assembled into an integral factory.

SZL series boiler sales are sold with key processing technologies such as steel plate blanking, circular ring and tube-plate drilling, all of which adopt advanced numerical control processing technology to reduce assembly stress and extend the service life of steam boilers. Advanced numerical control technology is used for steel pipe cutting, threaded pipe pressing and convection pipe machining. The welding of the longitudinal and circular joints of the steam boiler, the welding of the inside of the pipe and boiler barrel, the welding of the pipe and flange and other important parts are all adopted automatic submerged arc welding, or gas shielded welding and other automatic welding technology, to ensure the welding quality.

This series of steam boiler fuel adaptability, suitable for bituminous coal, anthracite, lean coal, lignite and so on. The combustion air system (base) adopts independent compartments and scientific sealing structure to avoid air leakage and improve the environment of the steam boiler room. Unique grate plates ensure the smooth operation of the grate. The secondary inlet air disturbs the flue gas in the furnace to ensure complete combustion. SZL series coal fired boilers are widely used in schools, textile factories, clothing factories, printing and dyeing factories, restaurants, food factories, beverage factories, soybean products factories, meat products factories, canning plants, wine factories, pharmaceutical factories, packaging factories, building materials factories, coating factories, natatorium and other enterprises and institutions.

 

Coal fired water tube boiler

 

SZL series boiler sales lengthening of the front and rear shafts of the boiler prolongs the combustion time of fuel in the furnace, makes the combustion of coal full, and reduces the carbon content of slag. The effective area of the grate is increased effectively, and the overload capacity of the boiler is enhanced obviously. Two sides of air inlet are adopted, and six independent air chambers are set along the longitudinal direction of the grate. Each air chamber is equipped with independent air adjusting device, which can adjust the air volume of each air chamber respectively, so as to achieve the regulation effect of combustion. Zozen Boilers manufacturing has 7 acceptance procedures, materials into the factory reinspection, material inspection, displacement, heat treatment, welding, welding test plate before the expansion, inspection check, water pressure test. Seven process stop points were set up, which were checked by different seven responsible teachers. If any one failed, the next process could not be carried out.

The post SZL Series Coal Fired Steam Boiler Sales appeared first on Industry Boiler Manufacturer.

Horizontal Oil Fired Boiler Life Expectancy

The horizontal oil fired boiler has been promoted and applied in many industrial places after continuous updating and improvement. The oil fired boiler manufactured adopts horizontal three-return structure with symmetrical center arrangement, which can improve the stress distribution of tube-plate. The series boilers are equipped with a wet-back structure combustion chamber and smoke pipe which can be completely immersed in water with good cooling conditions. Large combustion chamber is designed to facilitate flame expansion and full combustion. All the tube plates in the back combustion chamber are flanged and buttoned.The structure is stable and the service life is long.

 

Oil fired boiler manufactured

 

Industrial oil fired boiler is researched and produced by using advanced technology such as corrugated furnace. It not only increases the heating surface, but also alleviates the damage of heat expansion and cold contraction to the combustion chamber, effectively improving the strength. Large furnace design structure, fuel combustion completely full, use energy – saving environmental protection. Horizontal oil-fired boiler has long service life, conforming to the specified standards, energy saving and environmental protection, and has established friendly relations of cooperation with many users.

The oil fired boiler manufactured adopts threaded pipe, which effectively enhances the heat exchange effect and improves the boiler’s thermal efficiency. Advanced digital control technology is applied in the oil-fired boilers, which can monitor the combustion process accurately and remotely. The backwater of this series boilers is provided with a diversion device to guide the backwater to wash the high-temperature parts such as the boiler furnace and fire box. It not only enhances the heat exchange, but also effectively avoids the local subcooling boiling phenomenon, ensuring the safety performance of the boiler.

Oil industrial boiler automation level is high, the program control cabinet uses high quality electrical components, the quality is reliable. The controller adopts LCD or touch screen controller, with high degree of automation, easy to operate, automatic control of combustion, water level, temperature, leakage alarm, overpressure, overtemperature, water shortage protection and other interlocking security functions. This series of boiler products can add a heat exchanger in the smoke outlet. The heat exchanger uses spiral fins to enhance the absorption of the apparent heat and latent heat in the smoke, reduce the smoke exhaust temperature, and improve the thermal efficiency of the boiler.

This series of industrial boilers occupies a small area and saves the cost of electricity for boiler production. Because this series of boilers have less fuel transmission and other auxiliary equipment, small power and short continuous operation time, their power consumption is low and cost is relatively low. Effectively reduce the labor intensity, wide range of application. Oil-fired industrial boilers are suitable for paper industry, feed production industry, food and beverage industry, product drying industry and other industrial places.

 

Horizontal oil fired boiler sales

 

The oil fired boiler manufactured has reasonable design, large heating area, high thermal efficiency, fast heating up and guaranteed supply and operation. This series of boilers have novel appearance, bright and generous color, compact overall layout, small floor space and convenient installation and use. Zozen Boilers are a professional manufacturer of industrial boiler, fast delivery and also provides the perfect installation and using guidance. Welcome to the majority of users to consult procurement, we will serve you wholeheartedly.

The post Horizontal Oil Fired Boiler Life Expectancy appeared first on Industry Boiler Manufacturer.

Biomass Hot Water Boilers Manufacturing

Biomass hot water boiler is composed of boiler shell, head, furnace bile, furnace bile top, U-shaped ring, punch pipe and so on. Hot water boilers manufacturing combustion chamber is arranged in the furnace, and the furnace chamber is divided into two combustion chambers by the fire-resistant concrete furnace arch. The flue gas from the lower combustion enters the secondary combustion chamber through the throat on the arch of the refractory concrete furnace and is mixed with the secondary air input from the upper furnace door. After radiation heat transfer through the heating surface of the furnace, the flue gas generated by the high temperature passes through the annular smoke box for convection heat transfer again, and is finally discharged into the atmosphere through the chimney.

 

Hot water boilers manufacturing

 

Because this series of biomass boiler auxiliaries can burn wood, wood industrial waste, good environmental protection benefits. Adopt chain grate design, mechanization, high degree of automation, adopt heat insulation material and high color board outer packing. Namely heat preservation and energy saving, and beautiful generous. Biomass boiler is simple to operate, energy-saving and economical to use, reasonable structure, adiabatic combustion, high combustion efficiency, obvious energy saving, low fuel cost.

The hot water boilers manufacturing saves investment, the use of non-drum, induced draft fan cost investment, save electricity costs, the products are adopted fast delivery, easy installation. The horizontal biomass hot water boiler adopts the up-burning mechanism design, meets the smoke emission standard, and can be used in a class of environmental protection areas, without noise disturbing the people. The feeding and burning operation of the boiler is very convenient. The boiler is equipped with automatic ash cleaning device, which can timely remove the ash accumulated on the heating surface of the boiler, ensuring the efficient and stable operation of the boiler. Economizer is arranged at the end of boiler. Compared with traditional boilers, boilers have higher efficiency and lower exhaust temperature.

This series of biomass fired boilers make use of reasonable grate structure and secondary air to ensure the combustion efficiency of materials more fully. The reasonable design of biomass fired hot water boiler, so that the material is not easy to coking, reduce the boiler loss, can quickly form high temperature zone, flue gas in the high-temperature furnace for a long time, after many times with the wind, combustion full, high fuel efficiency, no black smoke. At the same time, it also avoids the widespread problems of “smoke and dust pollution, insufficient combustion and waste, energy-saving and environmental protection”, and emits smokeless and dust-free, and burns fully.

The industrial hot water boiler can be widely used in clothing manufacturing industry, food processing industry, hotel service industry, petrochemical industry, schools, hospitals and enterprises and institutions, especially suitable for the high requirements of environmental protection and energy conservation users in the region. This series of biomass boiler is suitable for combustion molding biomass fuel, also can burn rice husk, palm shell, cane residue, sawdust, coconut shell, wood and other fuels. At the same time, the ash and slag discharged from biomass hot water boiler can be directly used as farmyard fertilizer, which is a kind of highly efficient and energy-saving environmental protection product.

 

Biomass hot water boiler priced

 

Hot water boilers manufacturing adopts light chain grate, high degree of automation, equipped with dust removal equipment, less environmental pollution. With a good comprehensive economic and technical indicators, by the majority of consumers praise. Zozen Boilers can boiler house design and consulting services for users, to provide reference for the user in the boiler room layout, in addition to the supply, transportation, but also to provide users with high-quality installation services, at the same time to provide users with preferential auxiliary machinery accessories. Welcome to consult purchasing.

The post Biomass Hot Water Boilers Manufacturing appeared first on Industry Boiler Manufacturer.

Gas Fired Thermal Oil Boilers Safety

Gas fired thermal oil boiler is a new type of heating equipment using oil or gas as fuel and thermal oil as conduction medium. It has the advantages of full fuel combustion, high combustion efficiency, convenient operation and maintenance, high thermal energy utilization rate, environmental protection, energy saving, high efficiency, long service life and so on. The thermal oil boilers safety and reliable, and its manufacture meets the environmental protection requirements, and it can also meet the needs of customers.

 

Thermal oil boilers safety

 

YY(Q)W series thermal oil boiler is a new type of heating equipment, which uses oil or gas as fuel and thermal oil as conduction medium. By using circulating oil pump, the thermal oil is forced to circulate in liquid phase to transfer heat energy to the thermal equipment and then return to the heating furnace for reheating. It has the characteristics of low temperature and high pressure. In addition, it can also output two or more different temperature thermal oil at the same time according to customer requirements, so it is widely used in petroleum, chemical, textile, printing and dyeing, plastic, food and other industries, and has been the consistent trust and recognition of the majority of customers.

The gas fired thermal oil boiler adopts the horizontal three-return structure. The heating surface is mainly composed of the radiation heating surface composed of the inner coil and the convection heating surface composed of the middle and outer coils and the inner coil. The structure is very compact. The fuel is burned and released in the combustion chamber. After the heating surface absorbs most of the heat, the flue gas enters the convective heating surface and conducts heat exchange. Finally, the flue gas is sent to the chimney by an induced draft fan until it is discharged into the atmosphere. Thermal oil boilers safety with high performance, high system utilization, convenient operation and maintenance, perfect control system, energy saving and environmental protection is the ideal choice of heating equipment at present.

This series of organic heat carrier boiler adopts advanced control system to control the medium, with high thermal efficiency and easy maintenance. The compact structure of the boiler saves the floor space. Set automatic detection, control, chain alarm prompt in one, boiler operation without watch, save manpower. The furnace size matches the flame of combustion, and the radiant heat transfer rate is high. The heating system is simple and does not require water treatment equipment, which reduces the investment.

Gas fired thermal fluid heaters adopts coil structure with sufficient heating surface and high thermal efficiency. Easy to install, as long as the body and combustion chamber are closed. The boiler tail is equipped with air preheater, which greatly improves the efficiency of the boiler. Heating up to 300℃ above, making the boiler safe and reliable operation. The diameter and length of the radiating coil are suitable for the flame of the matching burner, which ensures the reliable operation and sufficient cooling of the coil.

 

Gas fired thermal fluid heaters

 

Thermal oil boilers safety has high performance, stable operation, high thermal efficiency and quick benefit recovery. In order to improve the thermal efficiency of the heat-conducting oil boiler, it is necessary to remove the ash scale on the inner wall of the furnace body and the wall of the coiled pipe in time to ensure the good heat transfer effect. Zozen Boilers products over the years dedicated to producing high quality boiler, gas heat conduction oil boiler application range, high efficiency, friendly and cooperative relations with many customers. We welcome you to contact us and visit our factory to visit procurement, we look forward to working with you.

The post Gas Fired Thermal Oil Boilers Safety appeared first on Industry Boiler Manufacturer.

Coal Fired Steam Boiler For Nigeria

The coal fired steam boiler adopts horizontal three – return water – fire tube structure. The fire tube is arranged inside the boiler barrel. The two sides of the furnace are equipped with light pipe and water wall tube. The coal fired boiler supply combustion of adopts chain grate to realize mechanical feeding, and equipped with blower, and induced draft fan to realize mechanical ventilation. During combustion, the combustion falls from the coal sill to the grate, and burns with the grate entering the chamber. The flue gas passes through the upper combustion chamber of the rear arch, enters the first bundle from the combustion chamber to the front smoke box, and folds into the second bundle to the back smoke box. It is pumped through an induced draft fan into the flue, dust collector and chimney, and discharged into the atmosphere.

 

Coal fired boiler supply

 

SZL series coal fired boilers have high automation level, automatic feed water regulation of boiler, alarm of high and low water level, interlock protection of low water level, interlock protection of induced draft fan and blower fan. This series boiler feeding, slagging and other operation mechanization, complete auxiliary machines. This series boiler has the steam pressure automatic regulation system, the boiler steam pressure automatic regulation system control system enters the working state, when meets the necessary conditions of combustion: when the steam pressure in the boiler is higher than or equal to the set pressure upper limit, the control system output stop signal.

Coal fired boiler supply is equipped with automatic control of water supply, and the feed pump is started when the system is on duty and in normal operation. The water pump works, the water level differential pressure transmitter detects the water level signal, and keeps the water level of the pot stable. Ensure the quality of steam. The water level regulating instrument shows the boiler water level. The water pump can also be manually controlled by touching the key on the control panel. The SZL series boiler is safe and reliable in operation with good controllability. The boiler adopts the air distribution in the warehouse, double-sided air distribution, uniform and reasonable ventilation, wide adaptability of coal, stable combustion, boiler room is a single-layer layout, short installation period for investors, suitable for all kinds of users.

This series of steam boiler fuel are generated after burning ash fall at the end of the grate discharge by slag, slag pit coal leakage and ash leakage with the chain grate into the front of the dust bucket inside and out, a part of fly ash in flue gas in convection bank settling down, by the tribal ashes on the door into the grate, the rest after dust separation into the hopper. After the air is sent to the main air duct by the blower, it enters the two air ducts of the chain grate through the bottom air chamber, and then enters the air duct through the fan door of each adjustable sector, and enters the furnace through the coal seam of the chain grate face.

The coal-fired steam boiler has compact structure design, small floor area, beautiful appearance, simple operation, stable operation, quick heating and pressure boosting, full output, and wide adaptability to coal types. This series of industrial boilers are equipped with all kinds of auxiliary machines. The induced draft fan, water pump, dust collector and so on can meet the boiler load requirements. This series of boiler air supply system adopts the two-side air supply device of storehouse type, each air chamber can be independently adjusted, the air leakage is small, the adjustability is strong, can better adapt to the chain grate combustion characteristic request.

 

Coal fired steam boiler sales

 

The coal fired boiler supply is designed with double drum, single layer arrangement, compact structure, large heating area, and 10% more heating surface than similar products. It has the characteristics of full strength, safety and reliability, short construction period, low installation cost and so on. The cyclone combustion chamber in the furnace reduces the dust content of flue gas, improves the boiler thermal efficiency and reduces the blackness of flue gas. The patented technology is adopted in the grate, which greatly improves the reliability of the boiler operation. Welcome everyone to come to consult purchasing, Zozen Boilers will serve you wholeheartedly.

The post Coal Fired Steam Boiler For Nigeria appeared first on Industry Boiler Manufacturer.