How to Connect Arlo Camera to Dodocool DC39 Extender?

If you want the following features, get a Dodocool DC39 Extender and connect it to your Arlo camera: You can install it wherever and however you want without worrying about WIFI connectivity. Furthermore, the Dodocool DC39 Extender system How to Connect Arlo Camera to Dodocool DC39 Extender The Arlo Camera to Dodocool DC39 Extender functions as a single point of connection between devices and connects to the router through WiFi.

Make sure the Ethernet port on the WiFi extender is operational before beginning the method for connecting an Arlo camera to it. If you don’t have it, you might not be able to get either of the device’s desired effects or outputs.

The Arlo camera is connected to the Dodocool DC39 Extender via manual method:

You should carry out the following method in the following order:

With caution, connect the provided WiFi range extender to the WiFi network. Begin by following the instructions in the user handbook.After you’ve decided where the Dodocool DC39 Extender setup and the Arlo camera will go, decide where the Dodocool DC39 Extender setup via ap.setup and the Arlo camera will go.After turning on the Arlo Camera, wait for it to establish a connection with the WIFI extension. To confirm that the associated devices are working properly, open the Arlo app and test it.The method described above can only be used to connect Arlo Q cameras to a WiFi extender. The Arlo cameras also require a base station and a WiFi extension.It’s also worth mentioning that when connecting an Arlo base station to a WiFi extender, the same restriction applies.Turn on the WiFi extender after connecting it to your existing WiFi network. Follow the installation instructions that came with the device to set it up.Verify that the Arlo camera is connected to the base station via Ethernet cable and that the base station has an Ethernet port.Establish an Ethernet connection between the Arlo base station and the WiFi range extender.After pushing the Power button on the base station for two minutes, wait for the Power LED and the Internet LED on the front panel to blink green. The first pass should include checking for connections in the app and attempting to utilise it for the first time.Frequently Asked Questions about Arlo Cameras and Wi-Fi Extenders

Q. Is there a WiFi extension included with the Arlo Pro 2 camera?

You cannot connect your Arlo Pro 2 camera directly to a WiFi extension at your home or workplace since it requires a base station. For more information, please see the procedures and directions indicated above.

Q.What is the Arlo camera’s maximum range from the base station?

The distance factor must be considered when positioning the Arlo wire-free cameras. When using a SmartHub or base station, the cameras can be placed up to 300 feet (90 metres) away from the Hub or Base Station.

The range will be reduced if there is an obstruction between the base station and the camera (such as walls, ceilings, or treetops).

Q. Do I need to connect my Arlo camera to my WiFi router as well?

If your WiFi router is already connected to an extension, there’s no need to create a separate connection between the router and the Arlo camera.

To operate as a bridge between the camera and the network, an Arlo Q Wi-Fi extender must be plugged into the same outlet as the router. If you connect the base station to a WiFi extender rather than a WiFi router, the same restriction applies.Is it possible to use an Ethernet wire instead of a regular cable to connect the Arlo camera and the WiFi extender?An Ethernet connection is required to connect an Arlo camera to a WiFi extender. This is because the Arlo cameras use a proprietary connection approach that is not supported by any other technology during the first setup process.You only need to connect the Arlo camera to the WiFi extension now.Using a Wi-Fi extension with an Arlo Q device is a simple and quick process. Simply buy a high-quality Ethernet cable and follow the preceding instructions.If you want to use another Arlo camera, you must first connect it to the base station. If the devices aren’t working, see if you can reconnect them.