Chasing the Perfect Podcast Microphone Sound

shure sm7b sm7b cardioid dynamic 225820








I’ve written like 5 articles about getting the right sound for my podcast. I talk about the different mics, the different settings, recommendations from NPR professionals, etc.



You can see the other articles in the related posts section below.



I’ve once again had an epiphany on this topic, so I thought I’d share it here in case it’s useful to someone.



Here’s how my basic evolution of thinking has gone:




Whatever, sound doesn’t matter that much (2015)
I guess I’ll get a Yeti mic because they look awesome (2015-2016)
It has to be all about the mic, so let’s figure out what the pros are using
More bass is authoritative
The RE27 N/D is the radio workhorse, so that’s the answer
Oh but wait, NPR uses the U87ai, so that’s even better
More bass sounds cool in the first 30 seconds, but is crap to listen to over time
Ok, Sam Harris has my preferred sound and he supposedly uses an SM7B


What this has brought me to is where I should have started with, but lacked the fundamentals to arrive at. Namely, it’s all about the impact to the listener.



Well, duh. But what does that mean?



First, the heavy bass sound that so many men go for is just bad. Don’t do it. It produces a dull, throbbing sensation that assaults the ear over time. And even worse, it is hard to hear when you have low-pitch noise that competes with it.



A sound that’s in the mid to higher range cuts through background noise better, and is easier to listen to.



Second, forget how podcasters sound and ask yourself how audiobooks sound. They’re designed to be listened to for hours at a time. And since I listen to lots of audiobooks, I started paying attention to their sound.



What do they tend to have in common?



They aren’t bassy at all, but they’re also not crisp. They’re mid to mid-high end in tone.



Next, they don’t have any high-fidelity character in the voice. It’s a neutral voice sound, so that you aren’t distracted by the speaker and can focus 100% on the content itself.



And that’s what got me thinking about Sam Harris’s podcast and all the various mics and sounds that I’ve tried.



I own the Yeti, the RE27, and the U87. And I just bought the SM7B.



When I was using the Yeti I didn’t know anything about sound, so that one doesn’t count. With the RE27 I was just learning, but I liked the fact that it had a wide dynamic range. And with the U87 I was obsessed with the best possible range and the fact that NPR used it.



But here’s the thing—it requires a studio to get the most out of it because it’s so damn sensitive. And even if I had a studio, it turns out I don’t want to hear perfect detail in my voice!



In fact, I just want to hear certain parts of it, in a clear mid-to-high range. And I want that sound to be extremely flat. Not flat in tone, but flat in character. I want it super dry. No noise. No clicks or pops.



No distractions.



This is precisely what I’ve loved so much about Sam Harris’ sound for so long.



He has a bassy voice, but the audio isn’t bassy. It’s flat and dry. And it doesn’t sound super accurate or super sensitive. It’s just clear.



I just set up my SM7B, which is the mic that Joe Rogan and he use, and I turned it down to NPR-like settings. Meaning, as little messing about as possible.




Cloudlifter
Bass rolloff on the mic
No presence enhancement on the mic
Standard pop filter (not the more bassy one)
Gain set to 40 on the RODECASTER Pro
Compressor, De-esser, Aural Exciter, Processing, High-Pass filter, and Noise Gate on RODECASTER Pro
No Bass Boost on RODECASTER Pro
No equalizer in post (Hindenburg)
Moderate compression in post (Hindenburg)


So I’m reducing bass on the SM7B itself, reducing more bass by using the High-pass filter on the RODECASTER Pro, and purposely not using the Big Bottom setting either.



And then I’m not using any equalizer in Hindenburg in post.



And I think these settings may have finally done it. The sound I just got is really close to what I’m looking for, with its unassuming forwardness and clarity.



Here it is for a listen.



I’ll continue to update this post as I make improvements. But hopefully this is fairly close to where I’ll be for a while. It’s time to land and focus completely on content rather than accouterments.



Anyway, hope this helps someone.



Summary


The bassy sound is not your friend
It’s possible to have too much clarity because it can distract the listener
My landing place is unassuming, dry, clarity, like what you hear above



If you get value from this content, you can support it directly by becoming a member. Being a member gets you access to the newsletter every week instead of just twice a month, access to the UL Slack Channel, the UL Book Club, the UL Archives, and access to future member-only content.



monthly-subscription





annual-subscription



 •  0 comments  •  flag
Share on Twitter
Published on June 26, 2020 16:16
No comments have been added yet.


Daniel Miessler's Blog

Daniel Miessler
Daniel Miessler isn't a Goodreads Author (yet), but they do have a blog, so here are some recent posts imported from their feed.
Follow Daniel Miessler's blog with rss.