Legends Ultimate home arcade firmware 4.9.0 is now out – Bluetooth audio, data manager, and more!

The weekly firmware release for the full-size AtGames Legends Ultimate home arcade machine is now out. You can see the new features in version 4.9.0 by checking out the release notes, which are reproduced as follows:

Legends Ultimate 4.9.0 (Mar 4, 2020)

Note: If you are updating from our open beta firmware, please perform a Factory Reset before updating to this release. Steps for Factory Reset can be found here: https://arcades.atgames.net/faq/.

Highlights



New Startup Page setting to set default page after powering on.Added Bluetooth audio device support.New Data Manager that gives the user more control over stored user data (Import, Export, Clean up).

Miscellaneous



Updated UI to allow page up/down using joystick at the edge of the screen.Fixed issue connecting to Bluetooth device using Bluetooth 4.0 or later.Attract mode no longer muted in the first loop when background music is on.Fixed USB, Spinner, and Trackball Health Check issue when in BT Device or OTG mode.Minor UI improvements.General performance and stability improvements.

Known Issues



OTG mode may reverse the P1/P2 controls on your PC, reseat the USB cable should reorder the controls, this will be addressed in a later release.Unable to change local video file for Attract Mode.In some cases, ArcadeNet boxarts will not load until the user navigates to the next page.

Additional Notes



We are working on getting OTG to work with more devices like RaspberryPi, Odroid etc.The clock will reset after power cycles due to hardware limitations, but it will automatically sync to the internet if the ALU is online.Control Mirroring only applies to ALU controls, not external controllers.Some add-ons will not run after the system has been left running for a while. if this happens please try again after a power cycle.The left-most USB port will not read USB drives when in OTG mode.When external devices can’t pair to the ALU in BT Device mode, please change to BT Host mode, disconnect the device, and try again.Data Manager will show a non-zero number after clean up due to non-exportable system logs.

The post Legends Ultimate home arcade firmware 4.9.0 is now out – Bluetooth audio, data manager, and more! appeared first on Armchair Arcade.