9 Smaart shortcuts that will make your life easier

#1 Spectrum sound check mode

One of the first steps in the Audio Analyzer Verification Checklist is to verify that Smaart is receiving all inputs. You can do this very quickly by pressing play on all inputs and then pressing the 0 (zero) key.

[image error]#2 Align all visible traces

Shift-click on any magnitude trace to align all visible traces at that frequency.

[image error]#3 Clear All dB Offsets

Now that you’ve made a mess by offsetting all your traces, Kondo your screen by clearing all offsets on visible traces with command+Y. If any hidden traces have offsets, they will be maintained.

#4 Hide all visible traces

When working with multiple microphones you can quickly fill the screen with saved traces. To clean it up, use command+shift+H to hide all visible traces.

#5 Quickly zoom in for detailed work

I recommend you edit your zoom presets to

30-400 Hz200-2000 Hz2-10 kHz10-18 kHzDefault

Now you can quickly navigate between them with option+1-5. Note that option+5 will return the currently selected graph to default view, but clicking on the perimeter of the Magnitude or Phase graph will return both Magnitude and Phase graphs to default view.

#6 Scroll

This is such a helpful one and a lot of people don’t know it. Most commonly I use it to scroll around the Y-axis of the Phase graph to make it easier to read. Combine this with my earlier post about flattening the phase and you’re in business.

Another common use is scrolling left and right on the X-axis after entering a zoom preset. Maybe I have zoomed into the low end to look at a crossover alignment and I need to scroll a few Hz to the right for more information.

[image error]#7 Recapture

A good way to keep your data bar organized is to avoid unnecessary traces. If you realize you’ve made a mistake, instead of saving a new trace, recapture an old one. Select the old trace and press shift+command+space.

#8 Stop the generator

There’s no need to continue running the generator while you are capturing and naming a trace. Quickly hit the G key and then the space bar to stop the generator right before you capture the trace.

#9 Get rid of the clock

Why does every audio analyzer think you need a clock? I guess it’s nastalgia from SIM3.

Use option+k to get rid of it. Simply pressing k will switch back and forth between the clock and the SPL meter.

What’s your favorite Smaart shortcut? Let me know in the comments below.

This article 9 Smaart shortcuts that will make your life easier appeared first on Sound Design Live. Sign up for free updates here.

Loved this post? Try these:3 Phase Alignment Hacks to Make Your Sound System Tuning Easier Smaart: Tracking peak frequency without the mouse cursor What do all of those squiggly lines mean? (a short intro to the graphs in Smaart)