Review: 3D MARS 3D Printing Filament (PLA)
As 3D printer owners soon come to know, there are a ton of filament options out there. Some are expensive and exotic, some are inexpensive and basic. Others are just cheap in every sense of the word. So how does the 1.75mm PLA filament from 3D MARS stack up?
The box.
Inside the box.
First off, it’s packaged properly. It’s in an overwrapped cardboard box, then the filament itself is shrinkwrapped with a silica gel (desiccant) packet. As for the filament, I’m reviewing the white, and I can say it’s really white, with low reflectivity. Using my digital electronic calipers, I can confirm that my roll had consistent dimensional accuracy.
My usual white spool, on the left, is more reflective and not quite as bright white as the 3D MARS filament.
Loaded using my external spool holder.
This is a large 1.2kg spool, which is much heavier and larger than the usual .5kg spools. Fortunately, using my Creker 3D Printer Filament Spool Holder with Bearing, even my modest New Matter MOD-t 3D printer can accommodate it without issue. Since this PLA works with an extrusion temperature of 195°C – 220°C (383°F – 428°F), as long as it can handle a larger spool size, I can’t imagine any printer not being able to work with this material.
A post shared by Bill Loguidice (@bill_loguidice) on May 26, 2017 at 6:32pm PDT
A post shared by Bill Loguidice (@bill_loguidice) on May 27, 2017 at 4:49am PDT
The first print at the larger size had some slippage starting at the necks.
The second print at a smaller size came out much better.
As you can see from the images, output quality is excellent, despite my printer “slipping” from the neck up on the first cat model (unfortunately, it does that once in a while; I have two other printers on the way; Anyway, I then printed the cat models at a smaller size, which you can see resulted in no slippage) and there being a slightly stronger odor than I’m used to with PLA. Nevertheless, considering the price is less than most spools of filament half its size, it’s easy to recommend the 3D MARS filament.
Pluses:
– Well packaged
– Meets stated specifications
– Pure white color with low reflectivity
– Low price equals high value
Minuses:
– Might be too large and heavy of a spool for some printers
– Slightly stronger odor than other PLA
Summary:
If you can work with large spools of filament, the 3D MARS 3D Printing Filament (PLA) is a high quality, value-priced choice.
Thanks to 3D MARS for the review unit.
The post Review: 3D MARS 3D Printing Filament (PLA) appeared first on Armchair Arcade.
