BOOK It to the Finish Line! (October)

[Lanelle, Production Chief]

Rutgers University Habitat for Humanity campus chapter holds a Build-A-Thon each year. In the weeks leading up to the event, teams will race to raise as much money as possible. Then on October 22nd, all of the teams come together to build the craziest, most innovative shacks they can!

https://www.youtube.com/watch?v=akR8b... - a 2:01 YouTube video

Duration: October 1 - 31, 2025
Books must be 140+ pages.
Audio books must be 3+ hours long.

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

* A jigsaw allows cutting angles of typically up to 45 degrees.
* A block plane is considered one of the easiest of all hand planes to use.
* A block sander uses a moving abrasive belt to smooth surfaces.

[Meg]

Book It
October 2025

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

* A jigsaw allows cutting angles of typically up to 45 degrees.
* A block plane is considered one of the easiest of all hand planes to use.
* A block sander uses a moving abrasive belt to smooth surfaces.

[Rissa]

BOOK It to the Finish Line! (October)

Duration: October 1 - 31, 2025
Books must be 140+ pages.
Audio books must be 3+ hours long.

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

[Lanelle, Production Chief]

I'm in. October 1 - 31, 2025
Tools read for: 1/3+

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story Force 10/1 ***
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart The Clockwork Scarab 10/1 ***
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

[Elle]

Book It to the Finish Line!
October 2025

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

[Mrs W]

Book It - October

Duration: October 1 - 31, 2025
Books must be 140+ pages.
Audio books must be 3+ hours long.

Saw Drill

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level

Drill - read a book where the MC is or was in the military
Friendly Fire by Marliss Melton
Pages: 317/ebook 1002 pages
Finished 10/5/25 ⭐⭐⭐⭐⭐
Fits: MC is a Navy Seal - ...Jeremiah Winters hadn't existed anywhere on the Internet. And now she knew why: he had dropped out of college to become a Navy Seal. p 79 ebook

Saw - read a book with all the letters of SAW in the title
Stay Awake by Megan Goldin
Pages: 340
Finished: 10/2/25 ⭐⭐⭐⭐⭐
Fits: All letters found in SAW - Stay AWake

Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

* A jigsaw allows cutting angles of typically up to 45 degrees.
* A block plane is considered one of the easiest of all hand planes to use.
* A block sander uses a moving abrasive belt to smooth surfaces.

[Caraina]

BOOK It to the Finish Line! (October)
Duration: October 1, 2025 - October 31, 2025

Books must be 140+ pages.
Audio books must be 3+ hours long.

Completed: 0/3

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

[JoAnne]

TCF October| BOOK It to the Finish Line!
Read: 0/3


Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

[LaurLa]

my spot

[Marla]

Book It to the Finish Line - October 2025
Rutgers University Habitat for Humanity Build-A-Thon
Duration: 10/1/25 - 10/31/25
Progress: 0 of 3 tools

Books must be 140+ pages.
Audio books must be 3+ hours long.

You must use (read) at least 3 tools to build your shack.
Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject

[Lucy]

Measuring Tape - read a book where the MC travels
Framing Square - read a book with a pretty cover (that you might want to frame)
Carpentry Pencil - read a book where the MC attends school
Hammer - read a book where you might want to 'pound' the MC
Pliers - read a book with twins in the story
Level - read a book that is set around sea level
Drill - read a book where the MC is or was in the military
Saw - read a book with all the letters of SAW in the title
Router - read a book where the MC uses a map
Jigsaw - read a book where the MC is 45 or older *
Nail Gun - read a book with a gun in the story
Block Plane - read any 140+ page book *
Plumb Bob - read a book with a Bob, Bobby or Robert in the story
Chisel - read a book where the MC is an artist
Clamps - read a book where the MC has a best friend
Calculator - read a book where the MC is considered smart
Belt Sander - read a book with an abrasive character in it *
Ladders - read a book where the MC works in an office
Extension Cord - read a book that is part of a series, but not #1
Notebook - read a paperback or a hardback
Screwdrivers - read a book where the MC drinks alcohol
Wrenches - read a book about a tough subject