Goodreads Authors/Readers discussion
Bulletin Board
>
Formatting a book?
date
newest »

I use LibreOffice and you can download it free. I use Calibre to convert to EPUB and run the result through the Kindle Previewer (Calibre and the previewer are both free), and then upload the converted doc to Amazon. For Smashwords I convert the original to a doc file, but you have to be careful to remove the extraneous bookmarks before uploading. The best formatting instructions I've found is the Smashwords Style Guide, which you can find free at Smashwords. Basically, you have to tinker with everything until you get it right, but persistence pays off. For paperbacks, you can download a free template at Createspace.com.
By the way, since everybody has his own system, practically everybody will disagree with how I do it, but it works for me, and you can make your own choices.
By the way, since everybody has his own system, practically everybody will disagree with how I do it, but it works for me, and you can make your own choices.

We then followed word for word Smashwords' guidelines for formatting for them and although the process was a bit laborious, when we sent it off, we got an OK with no errors. That took care of the versions of the book sold by Nook, Kobo, iTunes, etc.
We used Ingram for the hardcopy version of "Murder Becomes Manhattan," and again followed their step-by-step guides which again were not the easiest to follow but resulted in a quick OK from them and a lovely book when it came off the press. Hope some of that helps.

Smashwords (free) https://www.smashwords.com/books/view/52
Amazon (Free) http://www.amazon.com/Building-Your-K...
And Createspace templates (free) https://www.createspace.com/en/commun...
I also watched a video on youtube to complement the instructions https://www.youtube.com/watch?v=JrJKg... (You can probably skip the first half of it since it's more about why you should also do a print version of your book, but I found the second part helpful as it shows you where to find the tools in Office words if like me, you are not too familiar with the program. Although I use it all the time, I knew nothing about its secrets. :P
Hope this help.




If you're going to sell it somewhere else be sure to get the chapters headers formatted to HEADING 1 or 2 so the conversion will pick up the chapters correctly and create a Table of Contents (Apple, Barnes & Noble and other require this).


https://www.createspace.com/Products/...
I like to download and keep them all for potential future use.
As for ebook, I echo Amber--Draft2digital.com is the bomb. Much much easier than any other type I have ever found.
Good luck!
Regards,
Bruce Arrington

Do they take a net percentage of future sales? Regardless, I'm looking into it, as I'd rather spend less time working out formatting/converting and spend more time writing.

Createspace are equally easy to use, though the formatting process is completely different, but do get a cover FIRST, even if you intend to leave publishing a print copy for later.
KDP & Createspace do not provide the same selection of covers so they won't match, and they are boring. It cost me $12 to buy a good quality photograph from Canstock, who have a huge choice.
There is absolutely no need to employ anyone to produce top quality eBooks or paperbacks, but neither should you rely on Amazon "doing a conversion". YOU are the only one who cares about the way your book looks and whether all the features, like the Table of Contents, works, or even exists.
DIY does take time, but only the first time when you're learning how. Writing time is very precious, but if you've spent months on creating a novel, or a non-fiction book, which you are proud of, don't begrudge the time it takes to present it well.
Finding time to write the next book is where you hit the real problem. Publicity for indie authors is difficult and takes up far too many hours: it has to be done or the only people who'll ever buy your treasure is your family, and they are barred from reviewing it.

As for paperbacks, I use Createspace, but I always saw the document as a pdf. For some reason I have found that even if I use the Createspace templates, if I upload the book as a Word document, things get knocked off kilter a little bit. Uploading a pdf probably eliminates 95% of the formatting problems I had with Createspace.

I've never used Smashwords so I can't comment on that, but I certainly found I could use "fancy" features and check with the previewer if they worked the way I wanted.
For print books changing your completed Word document to a pdf is essential. The Createspace previewer then shows you any remaining faults and revised versions can be uploaded as many times as it takes to eliminate them. It's still worth ordering a proof copy. I found mine was fine, but it was good to see it and check before I hit publish.

Sarah is right. It is definitely worth ordering a proof copy. I had a book once where the page numbering was off. I didn't catch it in the preview but in flipping through a hard copy, it became obvious that pages I wanted on the left were on the right and vice versa. I only order a hard copy proof the first time, though. If I update the book later, I just go with online preview.

Do they take a net percentage of fu..."
D2D takes a percent of sales just like everyone else does. In order to stay in business they have to make money, as do all the other distributors. But it's your choice to use them or not.


Agree. If you can get your ebook past the Smashwords meatgrinder, you have one that will work great--and if you follow the steps in their FREE guide, you'll get there.
Also agree about CS--I use a PDF and get exactly what I want. The only question I now have, as I am formatting a non-fiction book for a friend, is about tables. I've seen recommendations to create them in excell or something and save as a jpeg. Anyone have experience with this? I'm almost certain that's what I'll have to do for Smashwords, anyway.

I added a simple graphic to my latest novel to denote the end of chapters. Although it appears correct in the downloaded file, some online readers blow it all out of proportion. It's difficult to make everything perfect for every platform, and impossible to know what the result will be.
I'm wondering what some of you have used in the past? Did you find a resource and format it yourself, or did you hire someone to format it and have it ready to be published?
I was looking for templates, but none of them seem to be free, and most of the tutorials are a bit confusing.
Thanks in advance!