Michael A. Pyle's Blog, page 160

17 Useful RV Accessories

Once you leave home, you’re going to have to rely on what you brought along for the trip until you can resupply. When you’re in camp, sometimes resupplying is easier said than done. Stock up on these useful RV accessories.

1. Drinking water hoses – Don’t just bring one, since you can’t mix drinking water and wastewater hoses; make sure you have a spare.

2. RV sewer hoses – The same thing applies here. Bring along a spare sewer hose for managing wastewater, just in case your primary hose fails. Stock up on RV toilet paper, too.

3. Surge protector (or better, an EMS) – A surge protector will protect your RV’s electrical system and the appliances within from power surges and spikes. Better yet, an EMS, or Electrical Management System, will protect against both high and low voltages.

4. Leveling blocks or jacks (and jack pads and levels) – Unless your RV has its leveling system, you’ll want to invest in leveling blocks or leveling jacks to maintain a stable, level surface. You’ll also want jack pads to provide a sure footing and to prevent the jack feet from sinking into the ground, as well as a level to double-check your handiwork.

5. TPMS – Properly inflated tires provide safer handling and improve fuel economy. A TPMS, or Tire Pressure Monitoring System, will help you keep on top of issues associated with pressure and temperature.

6. Holding tank treatments and accessories – Keep some spare holding tank treatment on hand, just in case you’re dealing with unpleasant odors on your next road trip.

7. Water filters or softeners – A water filter can improve the quality of water available to you while camping; a water softener can remove dissolved minerals that cause scale and can damage your RV’s plumbing and fixtures.

8. A generator – Whether it burns gasoline or uses solar panels, a generator can provide you with some emergency power if the lights go out.

9. Cell phone signal booster – Stuck in the outdoors, camping without a cell signal? A signal booster can solve that!

10. Water pressure regulator – Hose connections at RV parks can subject your camper to high water pressures that can damage the plumbing and fixtures; a water pressure regulator will keep them safe.

11. RV roof tape – High-quality roof tape will bond to nearly any surface and is resistant to the elements. Best of all, it’ll solve a leak in a pinch.

12. Portable air compressors – When you’re in camp and the tire pressure is low, you need a remedy.

13. Firestarters and flashlights – Needs no explanation. You need to be able to make a fire and have a redundant light source.

14. A camping mat – Will help you prevent dirt from being tracked through the interior of your RV.

15. A set of tools – You never know what will break, or when!

16. (If you tow) Towing mirrors or mirror extenders – These will add additional visibility to your towing vehicle and are especially useful for towing a travel trailer.

17. Organizers (there’s more than one type!) – Space comes at a premium in a camper, and camping accessories that will save you space are well worth the price. There are organizers you designate for towels, clothes, plates, cookware, and more, which can save you space in RV kitchens, closets, and elsewhere.

Ready to pack up some vital RV accessories before your next camping trip? Visit RV Upgrades at RVUpgradeStore.com, and get in touch with their customer service team at 866-332-7881. They’ll be ready to help you enjoy your camping experience with great prices, a wide selection, and of course, years of experience helping RV’ers just like you.

For more information about Water Softener For Rv and Rv Patio Mats Please visit: RVupgrades.com.

4 Top-Selling Kershaw Knives in 2021

Reviews and suggestions are great, but you can really tell a lot from the numbers. The following are some of the top-selling Kershaw knives over at White Mountain Knives, which carries one of the largest selections of Kershaw knives and tools on the market.

1. Kershaw Bareknuckle Sub Framelock, Gray Aluminum Handle, Stonewash, Plain Edge
This Kershaw Bareknuckle is 8.20” overall with a 3.5” blade made of 14C28N steel. The blade features a drop point, sort of in the likeness of a modified sheepsfoot, for added durability and integrity near the point. It also features a full flat grind and an attractive stonewash finish. It’s ideal for slicing and carving tasks, given the edge geometry and blade profile.

Only 3.55 ounces, it also sports attractive gray aluminum scales married to a stainless steel frame and liner, with a sub-frame lock that is both easy to engage and disengage with a smaller risk of accidental disengagement.

2. Kershaw Dividend Liner Lock, Spring Assisted Open, Olive Aluminum Handle, Composite Blade
KAI USA, the parent of Kershaw knives, released both SpeedSafe assisted opening and Composite Blade technology to the world. Both are present in this beautiful and functional Kershaw knife; it is easy and quick to deploy via its integral flipper mechanism and the blade pairs edge retention with durability.

It features a 3”, CPM D2/N690 composite blade with a graceful drop point and a swedge along the spine. 6061-T6 aluminum scales complete this attractive knife, which is easy to carry either free in a pocket or by its 4-position carry clip.

3. Kershaw Link, Liner Lock, Green Aluminum Handle, 20CV Blade
Overall, this Kershaw Link is 7.6” and it features a 3.25” blade of CPM-20CV steel for durability, toughness, and edge retention. The blade, with plenty of belly, a drop point, and an attractive swedge along the spine, also offers a hollow grind, which is excellent for game processing, food preparation, and other delicate tasks where a fine edge is required.

OD Green Aluminum handles finish this knife, along with a liner lock mechanism, an assisted flipper, and ambidextrous carry.

4. Kershaw Cryo Hinderer Folder, Black Plain Edge, Assisted Speed Safe Opening
This knife is easy to deploy via its thumb stud or flipper; it features SpeedSafe Assisted Opening for quick and easy deployment as well as a sturdy frame lock for excellent strength and reliability.

It offers a 2.75” drop point blade of 8Cr13MoV steel and 410 stainless steel black handle scales. With its Quad Carry pocket clip, simple design, and no-frills construction featuring dependable yet affordable materials, this is Everyman’s Kershaw knife.

In addition to these popular Kershaw Knives, White Mountain Knives carries a ton of other popular models, including the Kershaw Leek, Blur, Emerson CQC-6K, the Agile, and many others. In addition to these, and many variants thereof, they carry one of the industry’s largest inventories of other top brands, including Buck, Gerber, Cold Steel, CRKT, CJRB, Spyderco, Benchmade, and countless others.

Best of all, they offer this impressive selection of products at great prices and they even offer them at low prices and in conjunction with free shipping in the United States. Check out their website to pick up your next Kershaw knife today – and if you have any questions, contact them at WhiteMountainKnives@gmail.com.

For more information about Buy Hunting Knife and Leatherman Hunting Knife Please visit: White Mountain Knives, LLC.

Why Mango Butter is a Must if You Want Soft Skin

Looking for the ultimate soft skin product? Although there seems to be a neverending stream of different creams, lotions, and moisturizing products available on the market, you might not need any complicated and expensive formulas to get the results you want. All you need is high-quality mango butter!

What makes this plant-based butter so special, and is it really worth using over more sophisticated and purposeful formulas? Let’s dig a little deeper and find out.

Using Mango Butter in Your Skincare Routine
We’re all searching for better quality skincare products. Depending on our unique skincare needs, this can be a lengthy journey indeed. Some products that claim to be effective for creating softer, healthier skin just don’t get the job done. While others that rely on more powerful synthetic formulas can cause irritation and other side effects on the skin.

What many are realizing is that gentler, more natural substances might be the best solution for anyone in search of a powerful moisturizing product.

Mango butter fills this role rather nicely. Like other plant butters, it’s 100% natural and won’t irritate your skin. Created from the stone of the mango fruit, also called the mango kernel or pit, this creamy substance is often recognized for its variety of important nutrients and natural ability to help moisturize skin and hair.

It’s becoming more known that nutrients are the key to healthy skin. That includes powerful amino acids and antioxidants which help to fight aging. This is why more people are seeking out natural skincare treatments and products that primarily use all-natural ingredients, as they tend to be more effective and beneficial.

Making Soaps and Other Products With Mango Butter
Soaps can even be made using mango butter! This is the perfect treat for your skin, especially if you are dealing with dryness, redness, or irritation.

Not familiar with creating your own luxury soaps that use natural ingredients like this? It’s actually a lot easier than you might think. In all honesty, you can start off with a high-quality mango soap base and go from there. At MakeYourOwn.buzz, you will find an assortment of different soap-making products and ingredients you can use to make the perfect soaps right at home.

To make effective soaps and other personal care products like toners and moisturizers, it really comes down to the ingredients. There’s a reason why you’re starting to see mango butter pop up all over the place, as it is so effective as a hydrating and softening agent. If you are looking for that one “secret ingredient” to use in your skincare routine, high-quality raw mango butter is where it’s at. A reliable wrinkle-fighter and anti-aging butter that can be applied directly to your skin without the need for additional active ingredients or anything else. So even if you don’t want to make your own lotions or soaps, you can utilize it for healthier skin!

Stop by MakeYourOwn.buzz for all of your soap-making needs. If you are looking for a dependable place to get your hands on all-natural mango butter, they have it available in a variety of sizes. They are known as one of the best places online for high-quality soap-making and lotion-crafting ingredients, so visit their website if you are curious about trying this plant butter for yourself!

For more infomation about btms 25 and castor oil bulk Please visit Chemistry Connection.

Is the CRKT Pilar the Best Pocket Knife?

The CRKT Pilar, designed by Jesper Voxnaes for Columbia River Knife & Tool, has taken the knife community by storm. It represents a significant improvement in size and ergonomics over the CRKT Squid, which was another huge hit when it was released. Whether or not the CRKT Pilar is the best pocket knife is debatable; that’s a lofty title, but then again, the Pilar is a great knife.

The CRKT Pilar is graceful and practical in all the ways the Squid is not. Named after Ernest Hemingway’s sailing vessel that was used for covert reconnaissance in the Caribbean during the Second World War, the Pilar sports amazing ergonomics, a solid lock, and a blade that, despite its construction from a budget steel, is a serious beater.

The standard CRKT Pilar is made from 8Cr12MoV steel and sports a satin blade and similar, solid steel scales. Tipping the scales at 4.2 ounces, it’s a hefty little pocket knife; open, it’s 5.94 inches long and it sports 2.40 inches of blade length.

The blade appears in the likeness of a modified, attractively swedged sheepsfoot. It is made from incredibly thick blade stock, especially for its diminutive size. The grind is flat, and from the factory, the edge typically comes nearly sharp enough to shave with.

It features a gracefully swept belly and a fairly obtuse point that, despite not being particularly well suited to puncturing or piercing, doesn’t do a poor job of them either. This is definitely a pocket cleaver made for slicing and chopping, but it can still tackle detail work.

The ergonomics of the blade are excellent. While the scales are slightly small, there is an extremely generous choil behind the cutting edge; looping your index finger under there, in a saber grip, or your thumb against it, in a reverse grip, is extremely comfortable. For the purpose of leveraging the cutting edge in a standard saber grip, there is an extremely generous thumb scoop in lieu of jimping; it’s practical and comfortable.

Deployment of the CRKT Pilar is also a breeze. While the action is a little stiff from the factory, it limbers up admirably with use. One-handed opening is easy; instead of thumb studs, the blade features sharp but not uncomfortable thumb holes. A little bit of practice and this knife will flash open readily and lock open with a satisfying “thwack.” Opening and closing are easy without being too easy if that makes any sense.

This knife features a recessed frame lock system that is both very easy to engage and easy enough to disengage without being poorly designed or dangerous. Fans will love the fact that this knife is made with a frame lock instead of a liner lock locking mechanism; frame locks are stronger and can handle abuse, which a heavy little knife like this begs for.

As far as carry is concerned, this knife is a little bit heavy to carry freely in a pocket without noticing the weight, but it can easily be carried via the reversible pocket clip as well, in which case the weight balances nicely.

As for whether or not it is the best pocket knife, let the following facts speak for themselves. The Pilar has been such a hit, it has been modified into several variants, including the Pilar Large, the Pilar III, and Pilar models made with D2 blades and copper scales, respectively.

It’s hard to beat a model like this for an EDC knife; its stainless steel blade boasts both high corrosion resistance and decent edge retention, and even though the latter is not excellent, the steel is soft enough that it can be resharpened easily.

It also wins on price. You can pick up a CRKT Pilar right now off of White Mountain Knives for under $35. At a price like that, it almost costs more not to get one. Besides, if you don’t like this one, there are tons of other high-quality pocket knives on their website (also at great prices) that ship for free. Check out their website today at WhiteMountainKnives.com and send them a message at WhiteMountainKnives@gmail.com if you have any questions.

For more information about Spyderco Keychain Knife and Buck Survival Knife Please visit: White Mountain Knives, LLC.

Where Can I Find A Quality 1.5 Ton AC Unit

Winter is just around the corner, the smell of a hot cup of cocoa in your hands and the taste of chocolatey pretzels is gaining on you. During those months, the thought of a nice superior cooling option for your home will never enter your mind. But before you know it, you’re back in enduring yet another scorching summer days, and by then, it’ll be too much of a hassle finding the best high-quality air conditioner for your home.

To ease your struggle in relentlessly looking through catalogs and surveying for the perfect air-conditioner for your needs, we have prepared a quick guide on why you should consider a high-quality 1.5 ton AC unit, and where to get it.

Things To Consider When Choosing An Air-Conditioner
Basically, it does not matter if you’re shopping for an air-conditioner unit for your home or office. Just as long as you’re able to measure the space it will be cooling off, then you can start to consider other very essential things when picking an air-conditioner unit.

Air-conditioners vary in a lot of ways, one main thing is their tonnage. However, let’s take the confusion out of the context before we move forward. When we say 1.5 ton, it doesn’t have to do with its weight, you’re not going to have a hard time installing a 1.5 ton AC unit into your home. Air-conditioner tonnage means how much heat it can remove from the premises in an hour. Higher air-conditioner tonnage has generally far better performance than lesser ones if you’re trying to cool down a space that measures more than 180 square ft.

Nowadays, summers are getting much worse than they were a decade ago, so you better equip your home with an AC unit that has great cooling efficiency. Getting a 1.5 AC is better for a room larger than 200 square feet. Although, let’s face it, the bigger the unit, the higher its power requirements. But the good thing about it also is that its cooling capacity is way better than, let’s say, a 1 ton AC unit.

If you’re thinking “Oh, but I’ll have to pay more for a higher AC tonnage.” It actually depends. Like what’s stated above, you have to consider the space you want to be cooled down first. Take note that a 1 ton AC, while it has a lower purchase price than a 1.5 AC, will take a lot longer to cool down a room between 180-200 square feet. A 1.5 ton AC that will only take about thirty minutes or less to spread the cool air across the whole space.

So technically, your 1.5 ton AC unit is a lot more energy efficient than a lesser AC tonnage.

Where To Get It
When it comes to the heating and cooling milieu, Budget Air Supply has been in business for providing high-quality HVAC options. They are known for the reliable brands they carry and they have impeccable customer service ready to serve you. Check them out today!

How to Spot a Great Head Shop in DC

Now that marijuana and weed products are becoming much more widely available, the push for head shops and dispensaries is also widely growing. While in Washington D.C, recreational use of marijuana is allowed for persons 21 years and older. Also, anyone who has a medical marijuana card may buy their marijuana products from a dispensary. However, not many people have access or can get themselves a medical card. As some areas surrounding the DC area will allow you to buy certain marijuana products.

If you’ve successfully secured your weed stash, but are in need of other products that you couldn’t find at the dispensary, that means you need to make your way over to one of DC’s many head shops. Head shops are great places to buy any small types of smoking paraphernalia such as wraps, smoking papers, lighters, and even pieces like pipes, bongs, and bowls.

Anything other than actual weed or cannabis products, a head shop should and usually will have. However, since there have been so many head shops trying to accommodate the many dispensaries in and around the DC area, then it can be hard to choose which one would work best for you and what you need.

When searching for a new head shop to try out, there should be some traits and requirements that you should keep in mind for a head shop to meet your or anyone else’s standard.

5 keys traits to look for in a Head Shop in DC

Selection
This is probably one of, if not the most, important trait to look out for when browsing through a new head shop you’ve never been to before. What’s the point of buying from a certain head shop if you can only buy certain items and even having the possibility of having to search for a second head shop to get everything you need.

When you enter a head shop, you should be seeing a shop that has its shelves filled with items. A diverse selection of items at that. There should be multiple types of brands of items as well, especially when it comes to certain wraps and papers, as many of us have our own preferences.

This is also true when it comes to paraphernalia. If you are looking for a new glass piece to try out, you should have a good selection to choose from. The more selection, the better.

Quality
This trait also plays a huge role in terms of how good a head shop is. The quality of the products should be top-notch, especially when it comes to those glass pieces such as pipes and bongs. A good head shop will ensure that whatever item you buy is of great quality, so there is no need to seek out better quality items or return anything that you’ve bought because it’s not up to your standards to use.

Price
Regularly smoking can get quite expensive, so a good headshop will have affordable options for those who are looking to save a bit of money. You can still find high-quality items and glass pieces that your wallet will agree with! You don’t have to break the bank just for a good smoking experience.

Service
This goes without saying that all head shops need to provide adequate service. All workers and team members should be knowledgeable about the products that are being sold in store and should be courteous and helpful to all the patrons!

If you’re looking for the best head shops in DC, then you’re going to find it with FunkyPiece. Visit their website at funkypiece.com and see how they exemplify all of these traits and more!

For more information about travel dab kit and upright bubbler Please visit: FunkyPiece.

5 Effective Tips Used For Navigating The Booth Design

The design for the exhibition booth can be a tough task to handle. When you are planning to attend an exhibition or trade show, the main thing to decide is the exhibition booth design. It is the main asset that people keep struggling with the creative trade show booth ideas. From something simple to expensive, getting the perfect booth design idea becomes inordinate and unachievable sometimes. But there are some simple methods that can alleviate the stress of the brand owner. Have a look at some of the effective guidelines that you can follow when searching for the perfect trade fairs UK booth design. 

1. Keep the aim clear 

When you are searching for the exhibition booth design, the first step should be assessing the intents, goals, or objectives. As you are looking to generate leads and want to drive sales, you need to be more specific about the design. Who are your potential customers who you want at your booth? How do you want to make a first impression on the clients? What role would the event booth design play to make the impression? Make a list of your goals in advance so that you can move forward in the right direction. 

Take an example as if you want the booth to be revealing, giving live demos to a big audience can work. You should also pay heed to the spacing and seat at the booth. If you are planning for a one-to-one discussion, you need to appoint more private space to maintain the vitality. Such plans with your trade show design will let the visitors know about the would-be experience they will get. If you are not sure about the design, you can experiment with multiple options by keeping the goals in mind. If you really want to grab people’s attention to your booth, you need to be personalized with the allotted space. 

2. Experiment with color 

Though simplicity is great in itself, the exhibition events are meant to be for competition. There will be so much competition there and everybody will have a common aim of generating leads and driving sales. If you include different colors is a critical step for creating a successful and creative exhibition booth design. If your brands also include some color schemes, you should keep them according to the look of your brand too. 

You can also do experiment with creative colors during an exhibition which can attract visitors to your booth. How you can bring creativity to the booth design is either by adding boldly branded balloons or small airy details, the colorful booth grabs the attention of the visitors without making many efforts. 

3. Offering mementos 

Everybody loves free gifts or branded mementos! Instead of going with boring or cheap plastic gifts, you can bring some creativity into the freebies. Give a creative thought on what you can offer to the attendees which can be useful to them. It should also reflect a statement about your brand. Common examples include reusable coffee cups, water bottles, and other useful things. 

Such items will help people to remember your brand and they also build trust in your brand in a significant way. You can also arrange selfie stations or photo booths. If you gift the mementos to the audience such as brand photos with a message, this will create a positive experience among the audience with a particular message. 

4. Free refreshment 

The exhibition will go for long days, you can offer refreshments to the audience. This is a great idea to bring visitors to your booth. What you can do is offer them snacks, beverages in between the time period so that the clients get time to relax and slow down the process. Either organize a coffee break or a cocktail hour for the clients. 

If this scheme goes in the right direction, the attendees will definitely come to your counter and get a comfortable feeling there. This scheme will also help in building a social as well as personal connection with the clients. This sweet gesture from your side will give a happy feeling to the customers. This is proven to be a very effective tip when you offer the clients time to relax and offer refreshment to them.

Bottom Lines 

You can find the inspiration for the trade fair business booth design, but the objective should always be clear in your mind. The focus should be true to your brand and remember that you always keep your aim in mind throughout the process of creating your exhibition booth design. Do experiment with the colors and try to create something unique to grab the attention of the visitors. A unique exhibition stand never fails to impress the audience and makes you stand apart from the competitors.

How to Get Great Mac Laptop Deals

As expensive as it can get having to buy new technology all the time, we understand the frustration that a lot of people feel every time they notice it is about time to replace their previous Mac laptops with new ones. Laptops are usually essential equipment for school or work, so there is really no other way around it but to bite the cost and go along with it. However, there are some ways that you can find good Mac laptop deals when shopping that we might recommend. If you are really operating on a tight budget, or just want to save wherever you can, here are some ways you can try to get good Mac laptop deals when shopping.

Buy Refurbished
Automatically, if you are looking to get a Mac laptop at a great price, then you will want to shop for refurbished options. Brand new devices are significantly more expensive, even for devices that perform very similarly. You would be better off shopping for great Mac laptop deals with refurbished devices from trustworthy third party sellers. These sellers are experts on Apple products, and are able to test and repair any device that comes in to make sure that it is in complete working order. We would specifically recommend buying a refurbished device from a third party seller, as opposed to a used laptop directly from the owner online because it is safer for you as the customer. You can trust a device that has been refurbished to be functional and tested, but the same cannot be said for a used device that someone is trying to sell you themselves. They may not know much about Apple laptops or technology on the whole, and list a laptop that is in much worse shape than they claim. They may be completely unaware of any internal issues and assume that all is well since they cannot see what is inside or know what to look for. You are much better off shopping from a professional refurbishment shop and getting some great Mac laptop deals with confidence in your purchase.

Consider Older Models
This may not have been something that even crossed your mind before, but you should consider the possibility of getting a laptop that is a little bit older. Refurbished devices are past models that could be maybe two years old for a newer one or several years more for an older device. Your first instinct might be to purchase the newest one possible, but you should also consider getting an older device if you know that it will still work for you and run any programs you need to use regularly. These laptops are much less expensive and still functional, so if you feel like an older device serves all your needs, you can get one at a fantastic price.

Save on Accessories
Just as a bonus in our discussion, we should mention the cost of Apple accessories that will accompany your laptop. While you are shopping for Mac laptop deals, you should also think about the items you may need to go with your laptop like a new mouse or charger. All of these little things add up quickly, so you should cut down on those expenses by purchasing them refurbished as well.

With some direction, you might be able to find great Mac laptop deals that allow you to get the kind of device you need, without having to spend any more than necessary. It helps to know how you can shop and where you can look for great deals on any kind of Apple products. A good place to start is with macofalltrades.com since they have lots of refurbished laptops, including older models, as well as Apple accessories. Visit their website to see what kind of a deal you can get on the tech you need.

For more information about Used Macbook Air For Sale and Buy Macbook Pro Please Visit : Mac Of All Trades.

Top 3 Airsoft Rifles You Need to See

Few airsoft players if any would rush headlong into a match without a trusted automatic capable airsoft rifle that would suit their needs on open battlefields and in CQB alike. Some rifles are better for suiting a wide range of needs than others.

If you need a new, serviceable rifle for your next match, or you’ve been thinking about upgrading your current go-to platform, here are some of the best-selling, most popular airsoft rifles out there.

1. G&G ARP9 M4
The G&G ARP9 M4 has been making waves since it was introduced just a few years back. It’s consistently been one of the most popular AEGs on the market ever since, a fact that is backed up by its steady, high sales.

It’s more compact than its cousin, the G&G CM16 Raider, and its measurements vary from 20 to just over 23 inches depending on the adjustment of the stock. Even though it’s short, it still has plenty of rail space (adequate room for red dots and other attachments) and capacity, making it an extremely popular AEG for CQB.

Best of all, at under 250 dollars, you can hardly find a better or even a comparable SBR to the ARP9. In its price class, there’s not much else you can go with that can match the adaptability, light weight, and modularity of this AEG.

2. G&G CM16 Raider Short M4/M16
The G&G CM16 Raider is, without a doubt, one of the best AEGs ever designed, especially when you consider its price point. It is, hands down, one of the most reliable, dependable AEG rifles in its price range.

With a tough polymer receiver and high-quality metal internals including a Version 2 full metal, fully upgradeable gearbox with brass bearings, it’s rock solid. It’s also capable of producing muzzle velocities approaching 400 FPS with .20g 6mm airsoft BB pellets. Powerful, lightweight, and highly modular, it’s an extremely versatile AEG that can’t be beaten on price – you can find one for under 200 dollars.

3. KWA LM4 PTR GBB Airsoft Rifle
KWA is interesting in the airsoft game, as they produce some high-quality gas blowback airsoft rifles where most other producers are creating electrical airsoft replicas instead. This one is one of their top-selling GBB rifles.

This LM4 replica features full metal construction for unparalleled durability as well as a railed upper receiver with plenty of room for optics and other attachments, as well as a detachable carry handle and a retractable six-position LE stock.

Players will love the smooth, natural feel of the GBB action as well as the power of this rifle – capable of reaching 400 FPS when charged with green gas. It’s modular, capable, but still simple – all excellent traits in a GBB rifle. Reliability is important in the field.

All three of these airsoft rifles are top-sellers at MiR Tactical, online at MiRTactical.com. If you’re interested in learning more about these three models, or would like to see what else is at your disposal, check out the collection of airsoft guns on their website.

They sell countless GBB and automatic electric guns in addition to spring airsoft guns as well, from top brands like Lancer Tactical, KWA, Tokyo Marui, and many others, in addition to gas blowback pistols.

Whether you’re looking for an AEG, a GBB, or a powerful spring airsoft sniper rifle with bolt action, MiR Tactical can help. They offer low prices (plus a price match guarantee) in addition to low flat rate shipping and excellent service. Check out these models on their website and give them a call at 800-581-6620 if you want to learn more!

For more information about Hi Capa Parts and Action Army AAP-01 Please visit: MIR Tactical.

Trick Out Your Glock with These Top MCK Accessories

Glocks are incredibly popular handguns. They are light, durable, affordable, and reliable. They were among the first handguns to be mass-produced using polymers instead of steel, and although the general populace was skeptical at first, their durability and ease of operation have won the day. Suffice it to say they are some of the most popular privately owned handguns in the country, if not the world.

Manufacturers have been quick to capitalize on this popularity. Case in point: MCKs or Micro Conversion Kits, which convert popular models of Glock handguns (like the Glock 17, Glock 19, and Glock 22) into ultrastable, highly versatile platforms more reminiscent of an MSR than a pistol.

With tons of rail space and plenty of room for improvement, a Micro Conversion Kit (or MCK) is a blank canvas that you can turn into a custom weapon. Here are some of our top MCK accessories.

1.CAA Micro Red Dot Sight Crimson Trace (4 MOA)
With your handgun nestled under the MCK, you’re going to need a replacement for your sights, and the CAA Micro Red Dot Sight is ideal. Capable of 4 MOA accuracy, this red dot sight (which produces both red and green dots) enables lightning-quick target acquisition and a clear sight picture for fast, accurate, reflexive shooting and rapid follow-up shots. It’s also built tough. Made of aircraft-grade anodized aluminum, it’s resistant to recoil, shock, dust, impact, and even fog.

2.MCKL Integral Front Laser (Red and Green models available)
Sometimes laser sights have a real advantage over iron sights and even optics like red dot sights. They enable the quickest target acquisition of all as well as instinctual reflexive shooting. Best of all, mount errors are no problems with a laser sight – you just point and shoot. This laser is custom made to provide this shooter-friendly functionality to owners of Micro Conversion Kits. best of all, you don’t need to sacrifice other optics to include this in your build.

3.MCK Flip-Up Sights
While other sights and optics have their draw, no option is as reliable as iron sights. With MCK flip-up sights, you can have the best of both worlds – at the range or in competition. These mount easily to the Pic rails of MCKs and are adjustable for windage. Pair them with an MCK that’s also outfitted with laser sights and has two failsafe sighting options for CQB encounters.

4.MCK Integral Front Flashlight
Your sights and optics are not going to be of much use if you can’t see your target. An integral flashlight for your MCK is a vital tactical accessory that will literally prevent you from being “caught in the dark.” Mount one of these 500-lumen integral flashlights to your MCK and be better prepared for things that go bump in the night.

5.MCK Bipod
A bipod is a bit of a niche product for an MCK, but there is a real difference between shooting offhand and shooting from a stable platform. If there is an element of scoring or of distance in your shooting discipline, then a bipod is a practical accessory for your MCK.

Check out these and other top MCK accessories online at MCS Gearup. At MCSGearup.com, you’ll find countless Glock accessories like these, all at great prices. They ship fast too – in most instances, by the next day. Visit their collection online and get in touch with their customer service team at 239-848-6757 if you have any questions.

For more information about  Gun Accessories  and  Gun optics  Please visit: MCS Gearup.