|
IEC/TR 60721-4-0 Ed. 1.0 b:2002, Classification of environmental conditions: Part 4-0: Guidance for the correlation and transformation of the ... tests of IEC 60068 - Introduction
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-1 Ed. 3.1 en:2001, Fixed resistors for use in electronic equipment - Part 1: Generic specification
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60721-3-1 Ed. 2.0 b:1997, Classification of environmental conditions - Part 3 Classification of groups of environmental parameters and their severities - Section 1: Storage
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60728-12 Ed. 1.0 en:2001, Cabled distribution systems for television and sound signals - Part 12: Electromagnetic compatibility of systems
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60216-4-3 Ed. 1.0 b:2000, Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60364-4-43 Ed. 2.0 b:2001, Electrical installations of buildings - Part 4-43: Protection for safety - Protection against overcurrent
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61209 Ed. 1.0 en:1999, Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS): Operational and ... methods of testing and required test results
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60079-4A Ed. 1.0 b:1970, Electrical apparatus for explosive gas atmospheres: Part 4: Method of test for ignition temperature - First supplement. ... applies also to the second edition of 1975
by
|
|
|
IEC 61290-10-2 Ed. 1.0 b:2003, Optical amplifiers - Test methods - Part 10-2: Multichannel parameters - Pulse method using a gated optical spectrum analyzer
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61298-1 Ed. 1.0 b:1995, Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TR 61334-1-1 Ed. 1.0 b:1995, Distribution automation using distribution line carrier systems - Part 1: General considerations - Section 1: Distribution automation system architecture
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60068-2-67 Ed. 1.0 b:1995, Environmental testing - Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61202-1 Ed. 2.0 b:2000, Fibre optic isolators - Part 1: Generic specification
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61262-6 Ed. 1.0 b:1994, Medical electrical equipment - Characteristics of electro-optical X-ray image intensifiers - Part 6: Determination of the contrast ratio and veiling glare index
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61241-14 Ed. 1.0 b:2004, Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60462 Ed. 1.0 b:1974, Standard test procedures for photomultiplier tubes for scintillation counting
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60814 Ed. 2.0 b:1997, Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration
by
0.00 avg rating — 0 ratings
|
|
|
IEC 62053-31 Ed. 1.0 b:1998, Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only)
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61248-1 Ed. 1.0 b:1996, Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61643-21 Ed. 1.0 b:2000, Low voltage surge protective devices: Part 21: Surge protective devices connected to telecommunications and signalling ... Performance requirements and testing methods
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60654-1 Ed. 2.0 b:1993, Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61850-5 Ed. 1.0 en:2003, Communication networks and systems in substations - Part 5: Communication requirements for functions and device models
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TR 61119-4 Ed. 1.0 b:1997, Digital audio tape (DAT) cassette system - Part 4: Character pack format
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61203 Ed. 1.0 b:1992, Synthetic organic esters for electrical purposes - Guide for maintenance of transformer esters in equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TS 60695-7-3 Ed. 2.0 b:2004, Fire hazard testing - Part 7-3: Toxicity of fire effluent - Use and interpretation of test results
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61207-6 Ed. 1.0 b:1994, Expression of performance of gas analyzers - Part 6: Photometric analyzers
by
0.00 avg rating — 0 ratings
|
|
|
IEC 61326 Ed. 1.0 b:2002, Electrical equipment for measurement, control and laboratory use - EMC requirements
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60674-3-1 Ed. 1.0 b:1998, Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Biaxially oriented polypropylene (PP) film for capacitors
by
0.00 avg rating — 0 ratings
|
|
|
IEC 62345 Ed. 1.0 en:2005, ID format for 50 mm magneto-optical disc system
by
0.00 avg rating — 0 ratings
|
|
|
IEC 62107 Ed. 1.0 b:2000, Super video compact disc - Disc-interchange system-specification
by
0.00 avg rating — 0 ratings
|
|
* Note: these are all the books on Goodreads for this author. To add more books,
click here.