|
IEC 60268-8 Ed. 1.0 b:1973, Sound system equipment. Part 8: Automatic gain control devices
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60297-1 Ed. 3.0 b:1986, Dimensions of mechanical structures of the 482.6 mm (19 in) series. Part 1: Panels and racks
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60296 Ed. 3.0 b:2003, Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60294 Ed. 1.0 b:1969, Measurement of the dimensions of a cylindrical component having two axial terminations
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60287-3-2 Ed. 1.0 b:1995, Electric cables - Calculation of the current rating - Part 3: Sections on operating conditions - Section 2: Economic optimization of power cable size
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60287-3-1 Ed. 1.1 b:1999, Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60287-2-1 Ed. 1.2 b:2006, Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60286-6 Ed. 2.0 b:2004, Packaging of components for automatic handling - Part 6: Bulk case packaging for surface mounting components
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60286-5 Ed. 2.0 en:2003, Packaging of components for automatic handling - Part 5: Matrix trays
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TR 60283 Ed. 1.0 b:1968, Methods for the measurement of frequency and equivalent resistance of unwanted resonances of filter crystal units
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60282-1 Ed. 6.0 b:2005, High-voltage fuses - Part 1: Current-limiting fuses
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TR 60279 Ed. 1.0 b:1969, Measurement of the winding resistance of an a.c. machine during operation at alternative voltage
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60276 Ed. 1.0 b:1968, Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60273 Ed. 3.0 b:1990, Characteristic of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-9 Ed. 1.0 b:1977, Sound system equipment. Part 9: Artificial reverberation, time delay and frequency shift equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60264-3-3 Ed. 1.0 b:1990, Packaging of winding wires. Part 3: Taper barrelled delivery spools. Section Three: Specification for non-returnable spools made from thermoplastic material
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-7 Ed. 2.0 b:1996, Sound system equipment - Part 7: Headphones and earphones
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-6 Ed. 1.0 b:1971, Sound system equipment. Part 6: Auxiliary passive elements
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-4 Ed. 3.0 en:2004, Sound system equipment - Part 4: Microphones
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-1 Ed. 2.0 b:1985, Sound system equipment. Part 1: General
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-17 Ed. 1.0 b:1990, Sound system equipment. Part 17: Standard volume indicators
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-16 Ed. 3.0 en:2003, Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-14 Ed. 2.0 b:1980, Sound system equipment. Part 14: Circular and elliptical loudspeakers; outer frame diameters and mounting dimensions
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-12 Ed. 2.0 b:1987, Sound system equipment. Part 12: Application of connectors for broadcast and similar use
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60268-11 Ed. 2.0 b:1987, Sound system equipment. Part 11: Application of connectors for the interconnection of sound system components
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60265-2 Ed. 1.0 b:1988, High-voltage switches. Part 2: High-voltage switches for rated voltages of 52 kV and above
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60264-5-2 Ed. 1.0 b:2001, Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges - Specification for returnable spools made from thermoplastic material
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60264-4-2 Ed. 1.0 b:1992, Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60264-3-5 Ed. 2.0 b:1999, Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60264-3-4 Ed. 2.0 b:1999, Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools
by
0.00 avg rating — 0 ratings
|
|
* Note: these are all the books on Goodreads for this author. To add more books,
click here.
