|
IEC 60100 Ed. 2.0 b:1962, Methods for the measurement of direct interelectrode capacitances of electronic tubes and valves
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-6 Ed. 1.0 b:1983, Fixed resistors for use in electronic equipment. Part 6: Sectional specification Fixed resistor networks with individually measurable resistors
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-5 Ed. 2.0 b:1982, Fixed resistors for use in electronic equipment. Part 5: Sectional specification: Fixed precision resistors
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-5-2 Ed. 1.0 b:1992, Fixed resistors for use in electronic equipment - Part 5: Blank detail specification: Fixed precision resistors. Assessment level F
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-5-1 Ed. 1.0 b:1983, Fixed resistors for use in electronic equipment. Part 5: Blank detail specification: Fixed precision resistors. Assessment level E
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-4 Ed. 2.0 b:1982, Fixed resistors for use in electronic equipment. Part 4: Sectional specification: Fixed power resistors
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-4-3 Ed. 1.0 b:1993, Fixed resistors for use in electronic equipment - Part 4: Blank detail specification: Fixed power resistors, heat-sink types. Assessment level H
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-4-1 Ed. 1.0 b:1983, Fixed resistors for use in electronic equipment. Part 4: Blank detail specification: Fixed power resistors. Assessment level E
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-2 Ed. 2.0 b:1982, Fixed resistors for use in electronic equipment. Part 2: Sectional specification: Fixed low-power non-wirewound resistors
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60115-2-2 Ed. 1.0 b:1992, Fixed resistors for use in electronic equipment - Part 2: Blank detail specification: Fixed low-power non-wirewound resistors. Assessment level F
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60114 Ed. 1.0 b:1959, Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium-silicon type
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60107-6 Ed. 1.0 b:1989, Recommended methods of measurement on receivers for television broadcast transmissions. Part 6: Measurements under conditions different from broadcast signal standards
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60107-4 Ed. 1.1 b:1999, Recommended methods of measurement on receivers for television broadcast transmissions: Part 4: Electrical measurements ... receivers using the two-carrier FM-system
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60105 Ed. 1.0 b:1958, Recommendation for commercial-purity aluminium busbar material
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60104 Ed. 2.0 b:1987, Aluminium-magnesium-silicon alloy wire for overhead line conductors
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60094-1 Ed. 4.0 b:1981, Magnetic tape sound recording and reproducing systems. Part 1: General conditions and requirements
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60099-6 Ed. 1.0 en:2002, Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - Rated 52 kV and less
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TR 60099-3 Ed. 1.0 b:1990, Surge arresters. Part 3: Artificial pollution testing of surge arresters
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60099-1 Ed. 3.1 b:1999, Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60098 Ed. 3.0 b:1987, Analogue audio disk records and reproducing equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60096-4-1 Ed. 1.0 b:1990, Radio-frequency cables. Part 4: Specification for superscreened cables - Section One: General requirements and test methods
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60096-3 Ed. 1.0 b:1982, Radio-frequency cables. Part 3: General requirements and tests for single-unit coaxial cables for use in cabled distribution systems
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60096-2 Ed. 1.0 b:1988, Radio-frequency cables. Part 2: Relevant cable specifications.
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60095-4 Ed. 1.0 b:1989, Lead-acid starter batteries. Part 4: Dimensions of batteries for heavy trucks
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60095-2 Ed. 3.0 b:1984, Lead-acid starter batteries. Part 2: Dimensions of batteries and dimensions and marking of terminals
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60094-7 Ed. 1.0 b:1986, Magnetic tape sound recording and reproducing systems. Part 7: Cassette for commercial tape records and domestic use
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60094-5 Ed. 1.0 b:1988, Magnetic tape sound recording and reproducing systems. Part 5: Electrical magnetic tape properties
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60094-4 Ed. 1.0 b:1986, Magnetic tape sound recording and reproducing systems. Part 4: Mechanical magnetic tape properties
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60094-3 Ed. 1.0 b:1979, Magnetic tape sound recording and reproducing systems. Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60094-2 Ed. 2.0 b:1994, Magnetic tape sound recording and reproducing systems - Part 2: Calibration tapes
by
0.00 avg rating — 0 ratings
|
|
* Note: these are all the books on Goodreads for this author. To add more books,
click here.
