|
IEC 60605-2 Ed. 1.0 b:1994, Equipment reliability testing - Part 2: Design of test cycles
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60621-2 Ed. 2.0 b:1987, Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 2: General protection requirements
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60621-1 Ed. 2.0 b:1987, Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 1: Scope and definitions
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60620 Ed. 2.0 b:1984, Dimensions for the mounting of single-hole, bush-mounted, spindle-operated electronic components
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60619 Ed. 2.0 b:1993, Electrically operated food preparation appliances - Methods for measuring the performance
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60618 Ed. 1.0 b:1978, Inductive voltage dividers
by
0.00 avg rating — 0 ratings
|
|
|
IEC/TR 60616 Ed. 1.0 b:1978, Terminal and tapping markings for power transformers
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60615 Ed. 1.0 b:1978, Terminology for microwave apparatus
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60614-2-7 Ed. 1.0 b:1995, Conduits for electrical installations - Specification - Part 2: Particular specifications for conduits - Section 7: Rigid non-threadable conduits of aluminium alloy
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60614-2-3 Ed. 1.0 b:1990, Specification for conduits for electrical installations. Part 2: Particular specifications for conduits. Section Three: Pliable conduits of insulating material
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60614-2-2 Ed. 1.0 b:1980, Specification for conduits for electrical installations - Part 2: Particular specification for rigid plain conduits of insulating materials
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60614-2-1 Ed. 1.0 b:1982, Specification for conduits for electrical installations. Part 2: Particular specifications for conduits. Section One: Metal conduits
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60614-1 Ed. 2.0 b:1994, Conduits for electrical installations - Specification - Part 1: General requirements
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60613 Ed. 2.0 b:1989, Electrical, thermal and loading characteristics of rotating anode X-ray tubes for medical diagnosis
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60605-3-4 Ed. 1.0 b:1992, Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-44 Ed. 2.1 en:2002, Medical electrical equipment - Part 2-44: Particular requirements for the safety of X-ray equipment for computed tomography
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60603-8 Ed. 1.0 b:1991, Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for ... square male contacts of 0.63 mm x 0.63 mm
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60603-5 Ed. 1.0 b:1987, Connectors for frequencies below 3 MHz for use with printed boards. Part 5: Edge-socket connectors and two-part connectors ... printed boards with 2.54 mm (0.1 in) spacing
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60603-2 Ed. 3.0 b:1995, Connectors for frequencies below 3 MHz for use with printed boards: Part 2: Detail specification for two-part connectors ... 2,54 mm (0,1 in) with common mounting featur
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60603-1 Ed. 2.0 b:1991, Connectors for frequencies below 3 MHz for use with printed boards: Part 1: Generic specification - General requirements ... detail specifications, with assessed quality
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60603-13 Ed. 1.0 b:1995, Connectors for frequencies below 3 MHz for use with printed boards: Part 13: Detail specification for two-part ... 2,54 mm (0,1 in), with free connectors for no
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60603-10 Ed. 1.0 b:1991, Connectors for frequencies below 3 MHz for use with printed boards - Part 10: Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-3-1 Ed. 1.0 b:1996, Medical electrical equipment - Part 3-1: Essential performance requirement for transcutaneous oxygen and carbon dioxide partial pressure monitoring equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-6 Ed. 1.0 b:1984, Medical electrical equipment. Part 2: Particular requirements for the safety of microwave therapy equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-5 Ed. 2.0 b:2005, Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultrasonic physiotherapy equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-50 Ed. 1.0 b:2005, Medical electrical equipment - Part 2-50: Particular requirements for the safety of infant phototherapy equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-4 Ed. 2.0 b:2005, Medical electrical equipment - Part 2-4: Particular requirements for the safety of cardiac defibrillators
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-49 Ed. 1.0 b:2006, Medical electrical equipment - Part 2-49: Particular requirements for the safety of multifunction patient monitoring equipment
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-46 Ed. 1.0 en:1998, Medical electrical equipment - Part 2-46: Particular requirements for the safety of operating tables
by
0.00 avg rating — 0 ratings
|
|
|
IEC 60601-2-45 Ed. 2.0 b:2006, Medical electrical equipment - Part 2-45: Particular requirements for the safety of mammographic X-ray equipment and mammographic stereotactic devices
by
0.00 avg rating — 0 ratings
|
|
* Note: these are all the books on Goodreads for this author. To add more books,
click here.
