Machinery's Handbook Guide to the Use of Tables and Formulas: Hundreds of Examples and Test Questions on the Use of Tables, Formulas, and General Data

by John Milton Amiss

The 25th edition has been completely updated to reflect the changes and additions made to the "Handbook". Throughout, readers will find useful information on how to employ the "Handbook" to solve problems encountered on the job. In addition to offering a wealth of time-saving data that can help in almost any situation, it includes over 500 examples and questions with answers specifically selected for engineers and apprentices. 224 pp. Pub: 5/96.

240 pages, Hardcover

First published January 1, 1983

Reviews

[Calico · Rating 2 out of 5]

Filled with typos, wrong answers, incorrect page numbers, etc. I was required to buy this book for a college course. It's on the opposite end of the spectrum when compared to Machinery's Handbook 30th. I gave this book away -@ no charge- to another poor sap that had to take the course.

[Rodger · Rating 5 out of 5]

This is a must have handbook for any kind of metal fabrication. It's one of the books I would want on hand to re-build the world.

[Warren M. · Rating 5 out of 5]

As a machinist, the Handbook has been the quintessential reference for machining trumping even the internet. If you need to know the maximum diameter for a flathead screw in order to know how wide to make your countersink so the screw sits flush, then this book is for you!!!!

[David Hewitt · Rating 5 out of 5]

A must have on the desk of any engineer, or in the toolbox of any machinist.