Marc Spagnuolo's Blog, page 18

Pop the Bubble!

Show notes coming soon.

The post Pop the Bubble! appeared first on The Wood Whisperer.

Denver Skyline Daybed | Converts to King

As you might recall, my assistant Jon has some cool design ideas such as the Artsy Fan C-Table we made last year. His next idea was for a daybed featuring a stylized Denver skyline headboard. Since the bed is for his young daughter, one of the design priorities was to make sure the headboard could be re-used in the future for a larger king-size bed, and we were able to accomplish that.

The primary joinery for the bed is Dominos along with Domino DF500 Knock-Down Hardware.

The finish we used was Walrus Oil. Jon wanted a finish that was easy to apply, easy to repair, and most importantly safe for his daughter. It’s hard to think of a finish that fits that description better than Walrus Oil. Walrus Oil has a wide range of products but the one we used was their Furniture Butter. It’s made from plant-based polymerized oils and hard waxes and applies with nothing more than a rag.

If you’d like to try some Walrus Oil Furniture Butter for yourself you can use the coupon code Marc at checkout for 20% OFF until August 31st.

The post Denver Skyline Daybed | Converts to King appeared first on The Wood Whisperer.

Hang On, I’m Making a Thumbnail | TWW Live

00:00:42 – Welcome back to the Wood Whisperer Live Show
00:01:03 – Thank you to all who watch!
00:01:48 – Thank you to our Patreon and YouTube members!
00:02:35 – New video Friday!
00:06:20 – New mugs are in stock!
00:07:35 – Guild scholarship announcement
00:08:34 – Sign up for the Wood Whisperer newsletter
00:09:20 – Powermatic sweepstakes!
00:10:09 – How can I secure something like [picture] to the wall?
00:12:25 – What is the dinosaur comic in the background?
00:13:19 – Will this cutting board [picture included] explode with movement?
00:16:40 – Can you make your own furniture finish sous-vide style?
00:19:43 – Can I put a film finish over a waxed surface?
00:21:30 – Can you darken cherry plywood?
00:24:53 – Can you list estimated project time completion on guild projects?
00:26:22 – What’s the BAN hammer?
00:27:07 – Are square or round dog holes better?
00:28:28 – Do you have any recommendations for a drum sander?
00:30:17 – How can I fix turned, laminated legs that are splitting?
00:33:09 – How long can you leave finish in a spray gun before it’s an issue?
00:34:40 – Are you ever going to produce CNC content?
00:36:36 – Where do you buy your screws?
00:37:30 – Are guild projects good for brand new woodworkers?
00:40:00 – Are there any new techniques or tools that you’re excited about?
00:41:54 – Any strategies for complicated glue-ups?
00:43:30 – Do you ever get analysis paralysis at certain points of projects?
00:45:03 – How can you use the whole bottle of CA glue?
00:46:25 – How can I keep my brick-sided shop cooler?
00:47:37 – Can I add water if my Titebond III is starting to get thick?
00:48:13 – What do you do for your shop lighting?
00:52:17 – Why do I get a white spot when I put a hot plate on it?
00:57:10 – Mug giveaway! Congratulations!

The post Hang On, I’m Making a Thumbnail | TWW Live appeared first on The Wood Whisperer.

Hang On, I���m Making a Thumbnail | TWW Live

00:00:42 – Welcome back to the Wood Whisperer Live Show
00:01:03 – Thank you to all who watch!
00:01:48 – Thank you to our Patreon and YouTube members!
00:02:35 – New video Friday!
00:06:20 – New mugs are in stock!
00:07:35 – Guild scholarship announcement
00:08:34 – Sign up for the Wood Whisperer newsletter
00:09:20 – Powermatic sweepstakes!
00:10:09 – How can I secure something like [picture] to the wall?
00:12:25 – What is the dinosaur comic in the background?
00:13:19 – Will this cutting board [picture included] explode with movement?
00:16:40 – Can you make your own furniture finish sous-vide style?
00:19:43 – Can I put a film finish over a waxed surface?
00:21:30 – Can you darken cherry plywood?
00:24:53 – Can you list estimated project time completion on guild projects?
00:26:22 – What’s the BAN hammer?
00:27:07 – Are square or round dog holes better?
00:28:28 – Do you have any recommendations for a drum sander?
00:30:17 – How can I fix turned, laminated legs that are splitting?
00:33:09 – How long can you leave finish in a spray gun before it’s an issue?
00:34:40 – Are you ever going to produce CNC content?
00:36:36 – Where do you buy your screws?
00:37:30 – Are guild projects good for brand new woodworkers?
00:40:00 – Are there any new techniques or tools that you’re excited about?
00:41:54 – Any strategies for complicated glue-ups?
00:43:30 – Do you ever get analysis paralysis at certain points of projects?
00:45:03 – How can you use the whole bottle of CA glue?
00:46:25 – How can I keep my brick-sided shop cooler?
00:47:37 – Can I add water if my Titebond III is starting to get thick?
00:48:13 – What do you do for your shop lighting?
00:52:17 – Why do I get a white spot when I put a hot plate on it?
00:57:10 – Mug giveaway! Congratulations!

The post Hang On, I���m Making a Thumbnail | TWW Live appeared first on The Wood Whisperer.

CA Glue – The Woodworking Problem Solver

CA (cyanoacrylate) glue is a handy thing to have in the shop. It dries fast, comes in several viscosities, and can solve a lot of problems for the woodworker. Oddly enough, the thing I use CA glue for the least is gluing together joinery, mostly because a traditional wood glue is easier to use, works better, is safer and is less expensive. But it’s still worth having a bottle or two around the shop.

Relevant LinksThin CA GlueMedium CA GlueThick CA GlueGel CA GlueCA Glue AcceleratorDark CA GlueFixing Common Woodworking MistakesStop Buying Double-Sided Tape��

Here are just a few of the things you can do with CA Glue and the viscosities I recommend. I’ll spoil the ending: I think you’re best off buying two: Medium and either Thick or Gel

Small Finger Joints (Thin CA)��– Let’s say you’ve made a small decorative box or some other light-duty project and you have a bunch of finger joints to glue up. It’s kind of a pain to apply wood glue to all of those little fingers so an alternative option is to assemble the joints dry, then apply THIN Ca Glue over the joint, letting the glue soak into the wood and the space between the fingers.Firming Up Soft Wood (Thin CA) – If you’re working woods like spalted maple, you might find some areas of your boards that are soft and easy to dent. CA glue can be used to firm up the fibers.Tearout (Gel, Thick, Medium CA) – Tearout is a fact of life in the wood shop. Sometimes you can recover the torn out piece and you can glue it right back in place. Other times you might need to cut a patch out of scrap, but you can still attach it with CA glue.Small Cracks and Joinery Gaps (Medium CA) – If you’re board has small hairline cracks or maybe your joinery is a little gappy, you can use a mixture of CA glue and sawdust to make a serviceable filler.Knot Fills and Stabilization (Medium CA) – Small knots can be filled and stabilized using CA glue. Because it dries clear, the knot looks fairly natural as the dark color inside the knot shows through the CA glue layer.Figured Wood Tearout (Thick CA) – Sometimes when planing heavily figured woods, you can end up with lots of little divots in the surface. If using a clear topcoat that dries to a film, you can pre-fill the tearout with CA glue, sand it smooth, and then topcoat with your finish.Miter Clamp Blocks (Thick or Gel CA) – Using CA glue you can temporarily attach clamping blocks to a frame, as long as the clamp block is made from a wood that’s softer than the wood of the frame.Dark Streaks and Knots (Dark CA Glue) – As an alternative to a clear CA glue, you can use a pigmented glue to create a darker fill.Template Routing Double Stick Tape Alternative (Thick or Gel CA) – Using blue tape and CA glue, we can firmly attach templates to our workpieces without doing any damage.

The post CA Glue – The Woodworking Problem Solver appeared first on The Wood Whisperer.

Not Your Grandma’s Quilt Rack | Bent Lamination

My wife Nicole loves blankets and quilts and we often have trouble finding places to store them. Many of the quilts were made by Nicole so they’re actually something we’d like to be on display. So I went on the hunt for a cool quilt rack design to use as a starting point and quickly came up empty. Most quilt racks are more traditional in their styling and I wanted to do something different. That’s when I remembered an older project made by my good buddy David Marks on Woodworks: the Contemporary Magazine Rack. I though David’s design, if cut in half, would be a really cooling looking and elegant way to store a few quilts. So big thanks to David for letting me riff on his design and I highly recommend you go over to David’s site and spend $5 on that particular episode of Woodworks.

This is a fun and challenging project featuring bent lamination using a vacuum press, lots of mortise and tenon joinery, and modified half-lap joinery. If you’d like to see a more detailed presentation, we offer plans and a full video course on this project in the Wood Whisperer Guild.

And here are a few photos so you can see the Bent Lamination Quilt Rack in detail.

The post Not Your Grandma’s Quilt Rack | Bent Lamination appeared first on The Wood Whisperer.

Save the Domino! – TWW Live

Show notes coming soon.

The post Save the Domino! – TWW Live appeared first on The Wood Whisperer.

Buy This, Not That | Drill Bits

Drill bits are not all created equal and some bits won’t even find their way onto your radar until you’re neck deep in the craft. If you’re new to woodworking, this video might save you some time, money, and frustration as I show you the bits you should buy and the ones you should avoid. Unfortunately, many bits that excel in the construction industry just won’t cut it for fine woodworking and that means you may not find the good stuff at the local hardware store. Let’s dig in!

Twist Bits Vs Brad Point Bits

The standard twist bit is what most people think of when they hear the word “drill bit.” They feature a conical tip that can be tricky to locate accurately. They also have a tendency to cause tearout on the way it and on the way out of the material. Brad point bits are the much better choice for the fine woodworker. The spurs on the end of the bit are able to cut the wood fibers cleanly so the bit often has much less tearout. It’s still a good idea to have a Twist Bit set on hand for general use but when it comes to furniture projects, I’m using brad point bits.

Here’s a good fractional set of twist bits that should last you a very long time: Irwin 29-Piece Set��Here’s a budget-friendly set of brad point bits: Fisch 7-Pieces Brad Point SetHere’s a premium set of brad point bits: Lee Valley Carbide-Tipped Brad Point BitsForstner Bits vs Spade Bits

Twist and brad point bits only get so large, so at a certain point you’ll need to turn to a different style bit to make bigger holes. In construction, the spade bit is often used because it’s aggressive and hogs through softwoods like my son on a plate of pizza rolls. But if you use a spade bit on hardwoods you’ll not only have a bunch of tearout and an ugly hole, you also might find the drill jumping and bucking like an angry bull. Thankfully there’s a better way: forstner bits. Forstner bits are capable of making very clean holes with zero tearout and a nice flat bottom. I use them quite often for making counterbores and small recesses for hardware. There’s very little reason for a woodworker to have spade bits in their tool box.

If you disagree and you think you need spade bits, here’s a decent set you can waste your money on: DeWalt 6-Piece Space Bit SetHere’s a budget-friendly set of forstner bits to get you started: Freud 4-Piece Forstner Bit SetHere’s a nice higher-grade forstner bit set: Freud 7-Piece Carbide Forstner Bit SetCountersink Bits

All countersink bits are generally considered part of the furniture-building world but some are better than others. For years I struggled with a basic countersink that certainly worked, but it also left burn marks on the surface and clogged after every hole. A few years ago I came across a much better option in the Amana Countersink Bit. The bit is fully adjustable and features a rotating stop that won’t mar the surface. Furthermore, the design allows the chips to clear instead of clogging.

Stop beating around the bush. This is the countersink you want to buy: Amana Countersink Bit

The post Buy This, Not That | Drill Bits appeared first on The Wood Whisperer.

Verified! | TWW Live

00:00:34 – Welcome to TWW Live!
00:00:45 – Thanks to our Patreon and YouTube members!
00:01:42 – New video today
00:03:38 – What’s the blue tape on your shirt for?
00:04:40 – Guild projects still on pre-order!
00:05:05 – Is Rubio a good floor finish for a high traffic area?

How to Apply Rubio Monocoat to Furniture

00:07:20 – How can I keep my jigsaw blade straight when cutting?
00:10:00 – How can I make finishing a more enjoyable process? Thank You Jon Peters!
00:14:15 – How should I practice with an Arbortech type tool?
00:19:00 – Should beginner woodworkers start with hand tools?
00:20:28 – Can I put an outdoor poly finish on an indoor oil finish?
00:22:16 – How does the outdoor bench look now after a few years?
00:23:03 – How can I clean my spiral bit that seems to be tarnished?
00:24:53 – What’s your favorite wood for a) working b) looks c) finishing?
00:27:13 – How do you keep your small parts organized?
00:28:23 – Who wants to win a Festool sander?!
00:30:40 – What bit did you use for the bullnose profile in the pantry video?
00:32:50 – What size vacuum bag should I start with for veneering?
00:34:20 – Giveaway winners!
00:35:22 – Can you rank this list of guild projects by difficulty?
00:39:07 – Guild scholarship announcement. Apply until July 30th. Donate to the Scholarship program at
00:41:37 – How can you be more comfortable standing in the shop?
00:43:25 – Should rail and style doors be modified for outdoor use?

The post Verified! | TWW Live appeared first on The Wood Whisperer.

Verified!

Show notes coming soon.

The post Verified! appeared first on The Wood Whisperer.